volkano VK-1114-BK True Wireless Dual Driver Bluetooth Headphone Instruction Manual

: June 6, 2024
: Volkano

Resonance Unplugged Series
TRUE WIRELESS
EARPHONES WITH CHARGING CASE
INSTRUCTION MANUAL

volkano VK-1114-BK True Wireless Dual Driver Bluetooth
Headphone

Please read and retain these instructions for future references

volkano VK-1114-BK True Wireless Dual Driver Bluetooth Headphone - future
references

HIGHLIGHTS

Hands-Free Calling
Ambient SoundPass Mode
True Stereo Sound
Independent Earbud Pairing
Dual Driver Technology
Electro, Pop and Acoustic EQ Modes
Works with Siri and Google Assistant
Bluetooth ® 5.0
IPX5

PACKAGE CONTENTS

VolkanoX Resonance Unplugged Series True Wireless Stereo Earphones
Charging Case
USB Charging Cable
Instruction Manual
6 x Earbud Cap Sets, 3 x Sport Wing Sets

SPECIFICATIONS

Bluetooth ® : Version: 5.0
Chipset: Airoha 1526P
Proﬁles: A2DP, HFP, HSP, AVRCP
Range: 10 m / 33 ft
Frequency Response: 20 Hz – 20 kHz
Driver: 2 x 6 mm / 0.24”
Impedance: 16 Ω
Charging Case:
Battery: 500 mAh
Number of Recharges: 4
Charging Time: 2 Hours
Charge Input: 5 V DC, 1 A
Sensitivity: 98 dB
Battery Capacity: 2 x 50 mAh
Battery Type: Lithium Polymer
Playback Time: 2.5 – 4 Hours
Earbud Charging Time: 1 – 1.5 Hours
IP Rating: IPX5

IDENTIFYING PARTS

volkano VK-1114-BK True Wireless Dual Driver Bluetooth Headphone -
IDENTIFYING PARTS

LED Indicator
Multifunction Button
Microphone
Driver #1
Driver #2
Earbud Cap
Charging Contact Points
Power Switch for Charging Case
Charging Port on Case
LED Charge Indicator

INSTRUCTIONS FOR USE:

CHARGING THE CASE

Please fully charge the Resonance Unplugged’s charging case before ﬁrst time use.
Connect the USB A end of the Charging Cable to a USB Charging Port and insert the Micro USB end to the port on the charging case.
Make sure it is properly connected.
The LED charge indicator on the charging case will be ﬂashing white when the case is charging and will be a solid white once charging is complete. The charging lights indicate:

1 Light: 0% to 25% charge remaining
2 Light: 25% to 50% charge remaining
3 Light: 50% to 75% charge remaining
4 Light: 75% to 100% charge remaining

The charge can be checked by brieﬂy pressing the power switch of the case.
Note that the charge time for the case is two (2) hours.

CHARGING THE EARPHONES

Please fully charge the Resonance Unplugged earphones before use. Place the earphones into the charging case. A red LED indicator light on each of the earphones will turn on when charging has begun. A blue LED indicator light turns on when charging is complete.
Note: Charge time is approximately one (1) hour. Earphones cannot be used while charging.
When the battery level is low, you will hear a warning voice message and the red LED indicator light will switch on.
Note: The earphones will automatically turn off when charging even if they are powered ON before charging.

SWITCHING ON THE EARPHONES

To turn on the earphones, long-press the Multifunction Button on both earphones until the blue LED indicators ﬂashes. You will then hear a voice prompt indicating that the earphones have been powered on. To turn off the earphones, place the left earphone back into the charging case. You will then hear a voice prompt stating that earphones have been powered off.

PAIRING WITH BLUETOOTH ®DEVICES

Your earphones must be paired to a Bluetooth ® device before it can be used. It is only necessary to pair your earphones once with each device. Please switch on your earphone(s) before pairing them to your device.

Open the Bluetooth®Menu on the device you wish to pair (see “Locating the Bluetooth®Menu” for more details). Some devices require you to select “Search for Devices” or “Add New Device” in order to create a Bluetooth ® pairing.
Wait until you see “Resonance Unplugged-M ” on your device screen.
Select “Resonance TWS” on your device and follow any further prompts to pair. Once pairing is complete and a connection is established, the earphones will sound a voice prompt to indicate a successful connection and the LED indicator will ﬂash slowly.

Note:

This process must be done if you want to pair to only one earbud.
The pairing process must be repeated in order to pair the desired earphone of your choice.
The earbuds can be individually paired to different devices.

iPhone, iPad, and iPod Touch:
a) On your device, go to Settings.
b) Select Bluetooth®. If Bluetooth ® is not on, turn it on.
c) The iPhone / iPad / iPod will automatically search for new devices.
Android™ Phones and Tablets:
a) On your device, go to the Settings Menu.
b) Select Bluetooth ® (on older Android devices Bluetooth ® is found in the Wireless and Networks menu). If Bluetooth ® is not on, turn it on.
c) Select “Search for Devices” if your phone or tablet does not automatically search for new devices.

CONNECTING WITH PAIRED DEVICES

Once the earphones are turned on, they will automatically connect with the last paired Bluetooth ® device that is on and within range.
If the earphones do not connect automatically, open the Bluetooth ® Menu on your device and select “Resonance TWS” from the Bluetooth ® device list.

CONTROLS

Audio Control

Function	Operation
Play / Pause Track	Short press the Multi-Function Button
Next Track	Press and Hold the Multi-Function Button on the right earbud for 1

second
Previous Track| Press and Hold the Multi-Function Button on the left earbud for 1 second
Increase Volume| Double press the Multi-Function Button on the right earbud
Decrease Volume| Double press the Multi-Function Button on the left earbud

2. Controlling Phone Calls

Function	Operation
Incoming Call	Answer Call
Reject Call	Press and hold the Multi-Function Button for 1 second
Call In Progress	End Call
Mute Mic	Press and hold the Multi-Function Button for 2 seconds
Function	Operation
---	---
Redial	Double press the Multi-Function Button
Siri and Google Assistant	Press and hold the Multi-Function Button on either

earbud for 2 seconds
Change ED Setting| Press and hold the Multi-Function Button on either earbud until you hear two beeps. This must be done while playing music modes: Vocal, Enhanced Bass, and Balance
SoundPass Mode| Triple press the Multi-Function Button on either earbud

SAFETY PRECAUTIONS

The product should only be used with the parts provided by the manufacturer.
Never use your Resonance Unplugged near water or in areas where it can come into contact with water. Never handle the Resonance Unplugged if it has been dropped in water or any other liquid. If the product comes into contact with water while still plugged in, this is a safety hazard.
Always make sure your hands are dry before touching the USB cable or power connections.
Do not operate the product with a damaged cable, or after it malfunctions has been dropped or damaged in any manner.
The Resonance Unplugged is intended for personal use only. Commercial use invalidates the warranty and the supplier cannot be held responsible for injury or damage caused when using the device for any other purpose than that which it was intended for.
The Resonance Unplugged is not intended for use by children, or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety. Extreme caution must be exercised.
Children should be supervised to ensure that they do not play with the Resonance. Packaging must never be left within reach of children since it is potentially dangerous.

TROUBLESHOOTING

My mobile phone cannot ﬁnd any new Bluetooth ® devices?
a. Ensure the device has entered the pairing mode.
b. Ensure the device is within an effective working range.
Bluetooth ®device cannot pair up?
Ensure your mobile phone allows new connections and has not reached the maximum number of allowed devices.
The device does not play music or answer calls when it is connected to a Bluetooth ® mobile phone.
a. Ensure your mobile phone supports A2DP and HSF (Hands-Free) proﬁles.
b. Ensure your mobile phone is within an effective working range.
When paired with my computer, Windows ® asks for a new driver. Can you supply this?
We recommend you ﬁnd compatible drivers for your computer online.
Why can I not remotely control the Pause / Play / Previous / Next functions when music is playing?
This feature needs the Bluetooth® device paired with the earphones to support AVRCP (Audio / Video Remote Control Proﬁle).
Please ensure your device supports this.

CLEANING AND CARING INSTRUCTIONS

Before Cleaning: Ensure that your Resonance Unplugged is not plugged into any device before cleaning or maintaining it.
Cleaning: Wipe down the surface of your Resonance Unplugged using a soft, slightly damp cloth.
Do not use any harsh or abrasive cleaning chemicals or materials on your Resonance Unplugged as doing so may damage or scratch the surface ﬁnish.
Do not expose your Resonance Unplugged to direct sunlight or high temperatures for extended periods of time.
Do not store in temperatures over 60 °C.

ENVIRONMENTALLY-FRIENDLY DISPOSAL

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landﬁlls or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and

WARNING
This product can expose you to chemicals including polyvinyl chloride, which is known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.

DISCLAIMER

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VolkanoX is under license. Other trademarks and trade names are those of their respective owners All product and company names are trademarks™ or registered ® trademarks of their respective holders. Use of them does not imply any afﬁliation with or endorsement by them.

WARRANTY

The Resonance Unplugged Series True Wireless Stereo Earphones come with a standard 12-month limited warranty against manufacturing defects and faults. Should your Resonance Unplugged Earphones be unboxed with any faulty parts, poor ﬁnishing or visible damage, or failure to perform due to a manufacturing defect or poor workmanship, please return it with your proof of purchase (till slip or invoice) to the store of purchase for an exchange, or repair, depending on the store’s returns policy? This warranty commences from the date of purchase. Kindly retain your proof of purchase as well as the packaging for your warranty period.
NOTE:
The warranty does not apply to a product that:

a.) Has failed due to excessive wear and tear beyond what is considered to be reasonable.
b.) Has been misused or neglected.
c.) Has been damaged accidentally or by Force Majeure including ﬁre and ﬂooding.
d.) Has been used or operated contrary to operating or maintenance instructions outlined in this manual.

The Store of Purchase / Seller cannot accept any returned products that have not been returned in accordance to this warranty or which does not follow their own Returns Policy. Please refer to the Store of Purchase / Sellers Returns Policy for details. Should you require any further assistance or have any questions on your warranty, please contact the store of purchase.