soundcore A3012 H30i Wireless On Ear Headphones User Guide
- June 15, 2024
- Soundcore
Table of Contents
soundcore A3012 H30i Wireless On Ear Headphones
Specifications:
- Model: A3012 51005004256 V1
- Product Name: soundcore H30i
- Input: 5V 0.8A
- FCC ID: 2AOKB-A3012
- IC: 23451-A3012
- Maximum output power: 9.0dBm
- Frequency band: 2.4G band (2.402GHz-2.480GHz)
- 24-month limited warranty
Product Usage Instructions
Wearing:
- Identify the left (L) and right (R) earbuds.
- Place the left earbud in your left ear and the right earbud in your right ear.
Charging:
- Connect the charging cable to the charging case.
- Plug the other end of the charging cable into a power source.
- Wait for approximately 2 hours and 5 minutes for a full charge.
Powering On & Pairing:
- Press and hold the power button on one of the earbuds for 3 seconds to power on.
- After the earbuds are powered on, press and hold the power button for 1 second to enter pairing mode.
- Once connected, you will hear a voice prompt saying “Connected” for 3 seconds.
Button Controls:
The button controls on the earbuds allow you to perform various functions:
- Play/Pause: Press the button on either earbud once.
- Next Track: Press the button on the right earbud twice.
- Previous Track: Press the button on the left earbud twice.
- Volume Up: Press the button on the right earbud once.
- Volume Down: Press the button on the left earbud once.
FAQ
Q: Can I expose the earphones to water?
A: For IPX4, do not expose the earphones to dripping or splashing water. For IPX4, IPX5, and IPX6, do not submerge the earphones in water.
Q: Is it safe to use the product with cardiac pacemakers or other implants?
A: The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs), and other implants. Always maintain a distance of at least 3.94/10 cm between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other implant.
Q: Where can I find more support information?
A: For FAQs and more support information, please visit the official website: https://www.soundcore.com
WEARING
CHARGING
POWERING ON & PAIRING
BUTTON CONTROLS
FCC ID: 2AOKB-A3012
IC: 23451-A3012
Input: 5V 0.8A
210-220154
24-month limited warranty
Important Safety Instructions
- Do not disassemble.
- Keep out of the reach of children. The product contains small parts which may be a choking hazard.
- The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Do not use the product in environments with too high or too low temperatures, and never expose the product to strong sunshine or very wet environments.
- Ensure there is no liquid, sweat or water on the charging port when charging.
- Refer to your user manual for your earphones’ waterproof level and follow the corresponding instructions.
- For IPX4: Do not expose earphones to dripping or splashing water.
- For IPX4, IPX5, and IPX6: Do not submerge earphones in water.
Hearing Safety
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not turn the volume so high that you’re unable to hear your surroundings.
- Do not use earphones while driving.
- You should use caution or temporarily discontinue use in potentially hazardous situations.
The product generates stronger permanent magnetic fields that could cause interference with cardiac pacemakers, implanted defibrillators (ICDs) and other implants. Always maintain a distance of at least 3.94″/10 cm between the product component containing the magnet (earbuds and charging case) and the cardiac pacemaker, implanted defibrillator, or other implant.
Notice
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: https://www.soundcore.com.
Maximum output power: 9.0dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
- This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
- This symbol indicates “separate collection” for all batteries and accumulators. Danger of explosion if battery is incorrectly replaced. To reduce risk of fire, explosion or leakage of flammable liquid/gas, don’t disassemble, crush, puncture, short external contacts, expose to temperature above 60°C (140°F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries.
High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:
- During use: maximum 40℃ (104°F)
- Storage: -20 – 45℃ (-4 – 113°F)
- Transportation: 5 – 35℃ (41 – 95°F)
FCC Statement
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>