NextLight PRO Series CONTROL User Manual

: June 6, 2024
: nextlight

NextLight PRO Series CONTROL User Manual

Thank you for choosing

WARNING: Please read and follow the instructions before installing and using your NextLight Control Pro

1. NextLight Control Pro

Dimming Control – Adjusting output power of your light fixtures
On/Off Timing – Set precise times for daily shut off
Sunrise/Sunset Simulation over 60 minute periods
Included Temperature Sensor allows dimming and shut off at designated temperature thresholds
5 Year Full Warranty.

The NextLight Control Pro enables Dim-to-Off, Dimming Control and Programming for NextLight Pro Series products. Designed for controlling
NextLight Pro Series fixtures. The NextLight Control Pro can control up to 500 NextLight Pro Series fixtures per controller (250 fixtures per channel).

Please scan the QR code to access our online product listing for the NextLight Control Pro. There you can access more info,
digital versions of this User Manual, Spec Sheets and more!

If you still have questions, please call 513.718.7556 or email sales@nextlight.com

2. Package Contents

NextLight Control Pro x1
12V AC/DC Adapter x1
Temperature Sensor x1
NextLight Pro Series Control Cable (20′) x2

3. Connections

DC Input
Temperature Sensor Input
Channel A
Channel B

4. Product Installation

The NextLight Control Pro can be mounted to the wall using two nails/screws and mounting holes (3 3/8” apart) on back of controller.
Insert 12V AC/DC Adapter into DC Input and plug into a power source.
Screen will automatically turn on and you can continue setting up your controller.
Insert NextLight Pro Series Control Cable into Channel A/B of your NextLight Control Pro. Then screw the locking ring clockwise to ensure proper connection.
Insert other end of Control Cable into Dim In connection on Driver of first Fixture in lighting system chain.
Connect Control Cable from Dim Out on Driver of first Fixture to Dim In on Driver of next Fixture in the lighting system chain.
Repeat until all Drivers/Fixtures are connected.
To ensure proper dimming control, make sure Onboard Dimmer on Driver is set to
EXT (External Control). Not applicable to all NextLight Pro Series fixtures.

5. Temperature Sensor

WARNING: If the sensor becomes less sensitive or oxidized, it will cause the

temperature on controller to be different from actual ambient temperature. If this occurs, you will need to calibrate the sensor (H. Temp Calibrate).

Insert Temperature Sensor into Temperature Sensor Input.
Suspend the sensor down toward the space above the plant canopy, preferably not against the wall. Do not position the sensor in direct air flow.
Cover the sensor from direct light exposure from fixtures. Direct light cast upon sensor will affect the temperature readings and may cause premature auto dimming (D. Auto-Save Temp) or shutdown (E. Shutdown Temp) of lighting system.

7. Controls

Enter

Press to view Settings Menu
Press to save changes

Brightness

Shortcut to Output Power menu

Back

Navigate back to previous menu

Up

Move selection up
Increase value

Down

Move selection down
Decrease value

NOTES: Press once – Single value change, Press and hold (3 seconds) – Quick value change.

6. Main Screen

*Example values shown

Temperature

Ambient temperature detected by
Temperature Sensor.
TEMP: 80.0ºF

Date/Time

Current date and time of controller.
01/01/2021 07:00:00

Outputs

Channel Dim % Schedule Current Status

A 50% 08:00-20:00 OFF
B 50% 08:00-20:00 OFF

8. Settings

*Example values shown for all screen Settings

Settings Menu
Press Enter to view Settings Menu

A. Output Select
E. Shutdown Temp
H. Temp Calibrate
B. Output Power
F . Rise/Fall
I. Factory Reset
C. Light Timer
D. Auto-Save Temp
G. System Date/Time
J Screen Saver

A. Output Select

Set Output mode.

Press Up/Down to change value
Set AUTO to use fixtures with controller
Set ON to turn all fixtures ON at set Output Power
Set OFF to turn all fixtures OFF at 0%
Press Enter to save changes

B. Output Power

Set Output Power % for Channels A & B

Press Up/Down to change value
Press Enter to save changes

C. Light Timer

Set Light Timer ON/OFF values for hour/minute

Press Up/Down to change hour
Press Enter to select channel
Press Enter to save hour change
Press Enter to save minute change
Repeat and set hour/minute for OFF time
Press Up/Down to change minut

D. Auto-Save Temp

Set temperature threshold for auto dimming to 50% of current setting

Press Up/Down to change Auto-Save Temp value
Press Enter to save changes
For example:
OUTPUT SELECT AUTO AUTO-SAVE TEMP 90.0°F
Current Output Power setting is 50%, it will auto dim to 25% when temperature reaches 90ºF.

E. Shutdown Temp

Set temperature threshold to shut down fixture automatically

Press Up/Down to change Shutdown Temp value
Press Enter to save changes

F. Rise/Fall

Set time period for sunrise and sunset

Press Up/Down to change minute value
Set 1 – 60 minutes or NONE
Press Enter to save changes

G. System Date/Time

Set local date and time

Press Up/Down to change date values
Press Enter to save changes
Press Up/Down to change time values
Press Enter to save changes

H. Temp Calibrate

Set Temperature Sensor calibration
Temperature Sensor may become less sensitive or get oxidized causing temperature on controller to be different from actual ambient temperature.

Press Up/Down to change Temp Calibrate value
Press Enter to save changes For example:
Temperature shown on controller is 79.0ºF
Real ambient temperature is 80.0ºF tested by a reliable third party temperature sensor
There is a 1ºF difference
Set Temp Calibrate setting to match ambient temperature (80ºF)
This will offset all readings from Temperature Sensor by 1ºF

I. Factory Reset

Set controller to original factory settings

Press Up/Down to change YES/NO
Select YES and press Enter to save and return to original factory settings

J. Screen Saver

Set Screensaver ON/OFF

Press Up/Down to change ON/OFF
Select ON to turn screen off after one minute
Select OFF and screen will stay on
Press Enter to save changes

9. Safety Recommendations and Warnings

WARNING : Please read and follow all Safety Recommendations and Warnings before installing your NextLight Control Pro.

Please check and adhere to all local rules, regulations and zoning codes when installing.
The installer is responsible for correct and safe installation of light system.
The NextLight Control Pro may only be used to control NextLight Pro Series products. Do NOT connect the controller to other products as this may be dangerous and may cause
malfunctions in the connected equipment. Doing so will void the warranty.
Do NOT hang Controller by Power Cord.
Only use Power Cords that were supplied with your Controller.
Do NOT use the Controller with a damaged Power Cord.
Do NOT attempt to open, rewire or reconfigure any components of the Controller. It will void the warranty and could cause serious injury or death.
Always disconnect power from the Controller before moving or cleaning it.
Do NOT clean the Controller with detergents, abrasives or other aggressive substances.
Do NOT use the Controller near flammable, explosive or reactive substances.
Keep the Controller away from excessive heat, water, dust and contamination.
Do NOT use any Volatile Organic Compounds (VOCs) on or near the Controller. VOCs can cause damage to the components (including insect foggers).
If the surface of the NextLight Control Pro is dirty, wipe it with a dry towel.

10. NextLight Support

nextlight.com/support

Please scan the QR code to access our online Support page, which includes the User Manual, FAQ and additional Warranty Claim information.

11. Five (5) Year Full Manufacturer’s Warranty

All NextLight products carry a Five (5) Year Full Manufacturer’s Warranty from date of purchase. Please follow all instructions and guidelines to ensure warranty
is not voided. This warranty does not apply to any product which has been damaged, defaced, subjected to misuse, abnormal service or handling (including shipping
damage) or which has been altered in design or construction.

To file a Warranty Claim, visit nextlight.com/warranty.

This product is for horticulture use only. Not suitable for room illumination

Legal Disclaimer

NextLight products are to be used for lawful purposes only. It is the responsibility of you as the purchaser to know and abide by all laws pertaining to the use of NextLight products. NextLight, LLC will NOT be held liable for any unlawful state or federal activity arising out of the use of our products. By purchasing a NextLight product, you are agreeing to these terms and conditions, confirming that you as the purchaser are attesting to the lawful use of our product and are thereby solely responsible for acting in conformance with all applicable regulations.

Thank you for choosing
513.718.7556
Questions about your NextLight Pro Series products?
sales@nextlight.com