Barrettee B087QRTVXC Outdoor Living 73030537 T 42 Inch Vinyl Rail Gate Kit Instruction Manual
- June 6, 2024
- Barrettee
Table of Contents
Barrettee B087QRTVXC Outdoor Living 73030537 T 42 Inch Vinyl Rail Gate
Kit
Barrette Outdoor Living
545 Tilton Rd, Egg Harbor City, NJ. 08215
barretteoutdoorliving.com •
800-336-2383
To register your product, please visit: barretteoutdoorliving.com
WARNING:
- Improper installation of this product can result in personal injury. Always wear safety goggles when cutting, drilling and assembling the product.
- Incorrect installation may cause harm to the gate or individual.
- Not pool code approved.
NOTICE:
- DO NOT attempt to assemble the kit if parts are missing or damaged.
- DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
Please read the instructions completely before assembling. Retain manual and
your dated sales slip for future reference or warranty claims.
To obtain and review a copy of the warranty please visit:
barretteoutdoorliving.com. You may also
contact us at 1-800-336 2383 or email
Cs.outdoorliving@ebarrette.com
TOOLS NEEDED:
| Gate| | 3/32″ Drill Bit
---|---|---|---
| Safety Glasses| | Pencil
| Level| | Phillips Driver Bit
---|---|---|---
| Tape Measure| |
COMPONENT LIST
| QTY | Description |
|---|---|
| 1 | Latch |
| 1 | Striker |
| 6 | 1″ Square/Phillips Combo Screws |
- Install Barrette Outdoor Living Gate Hinges before installing latch (Fig. 1).
- Once hinges are installed and gate is aligned, mark pilot holes for latch on post and gate through screw holes. Then drill using 3/32″ bit (Fig. 2).
- Measure and install latch with six 1″ Square/Phillips combo screws. The latch striker is installed on the gate first and then install the latch catch onto the gate post (Fig. 3).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>