HYPERKIN M07381 3-in-1 HDTV Cable for PS2 and PS1 User Guide
- June 6, 2024
- HYPERKIN
Table of Contents
3-in-1 HDT Cable for GameCube®/ N64®/ Super NES®
Cable Status Guide
The colored LED INDICATOR LIGHTS on your cable tells you your cable’s status.
The BLUE light indicates that the cable is transmitting a signal. The RED
light indicates the cable is powered ON.
Both Blue and Red Light On = Cable is working
Red Light Only = Sleep Mode
If your cable has no signal for 10 minutes, it will switch to Sleep Mode.
Note: If your cable is not functioning correctly, an additional power
source might be required. Connect the included Micro cable into the Micro port
on the HD Cable and the other end into a 5V 1A USB power source. The power
source is not included.
Please visit www.Hyperkin.com/warranty to register your official Hyperkin product.
Statement of Compliance with EU Directive
Hyperkin Inc., located at 1939 West Mission Blvd, Pomona, CA 91766, declares
under our sole responsibility that the product, 3-In-1 HDTV Cable For
GameCube®/ N64®/ Super NES®, is in compliance with the essential requirements
and other relevant provisions of Low Voltage Directive (LVD) 2014/35/EU, EMC
Directive 2014/30/EU, and RoHS Directive 2011/65/EU and carries the CE
marking.
The full Declaration of Conformity can be requested by emailing:
Email: compliance@hyperkin.com
Company Name: Hyperkin Inc.
Address: 1939 West Mission Blvd, Pomona, CA 91766
© 2020 Hyperkin Inc. Hyperkin® is a registered trademark of Hyperkin Inc. GameCube®, N64®, and Super NES® are registered trademarks of Nintendo® of America Inc. This product is not designed, manufactured, sponsored, endorsed, or authorized by Nintendo® of America Inc. in the United States and/or other countries. All rights reserved. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>