Shenzhen Nanxiangzi Technology T95MAX-H618 Smart TV Box User Manual
- June 3, 2024
- Shenzhen Nanxiangzi Technology
Table of Contents
Shenzhen Nanxiangzi Technology T95MAX-H618 Smart TV Box
Getting Started
Basic Operations
Power On/ Off and Sleep
- Connect the box to the TV with an HD cable, connect the box to the power adaptor, and Connect the mouse, air mouse or other input devices with a USB port
- After the device and cable connections, power led tum to blue
- After the device and cable are disconnected, Power LED turns off
- Under power-on mode, press the remote control’s power button, device is entering sleep mode
- Under sleep mode, the device will be wake when you press the remote control’s power button,
Open applications
Use the remote control’s arrow keys to choose the wanted program, and click
the OK button to open the selected program
Switch in the applications
Click “My Apps” to view recently used programs, click program, con to switch
appl1cat1on arbitrarily
Close Applications
Click, con 口• to view recently used programs, choose one of them by click and hold, and drag it to the blank area to close the application
- This function only operated in the condition of Mouse mode
Back To Home Screen
- Click the icon to return to the home screen
- Click the icon on the remote control to return to the home screen
Read External Storage Data
- Read U Disk
- Insert U flash disk or removable hard disk into USB port in the status of power on, icon USB appears in top left corner of the desktop, open “FileBrowser, the identified USB(A:) will appear under “Local Disk, U disk’s operation is available now
Read TF card
Insert TF card into the device in the status of power on, when the icon corner
of the desktop, open “FileBrowser”, the identified External Storage Card will
appear under “Local Disk’, TF card’s operation is available now
WIFI Function
- Home Screen Settings >Network Select “Wi-Fi” to open the WIFI function
- Choose hotspot Input Password- Connect to the network
Ethernet Function
- Home Screen Settings >Network> Select “Ethernet” to open the Ethernet function
- Insert the network cable, the network will be connected automatically
WLAN Hotspot
Operations on the box:
- Home Screen Settings OtherMore Setting>Portable hotspot Select “Portable Wi-Fi hotspot”
- Select “Set up Wi-Fi hotspot” to set up “Network SSID” and “Security “Password parameters
- Ensure connected to the wired network, the box can be used as a wireless AP to support more wireless devices access in the family
The Step that how to reflash the box
- Uncompress the downloaded firmware(ROM) to the root of an sD/TF card(format your card first).
- Insert the SD Card into the powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert it into the AV port of the Box, and press and hold the hidden button while plugging the power in. Do not release until you see the screen of Robert Logo.
- The update will run automatically. When it is done then choose “Reboot’. You can disregard any errors that display after the update, they are not relevant to your device
- When the system has rebooted then you should first check to ensure wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.
Product Declare
- Legal notice: Special reminder that this product is only for overseas use, The content of installed should comply with the relevant local laws and regulations, In case of any violation of laws and regulations The manufacturer does not bear the result.
- Manufacturers promise: The content of the manufacturer preinstalls, complies with local laws and regulations, and does not involve illegal content.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator and your body.