Arylic NEW003 Up2Stream Plate Amp 2.1 Multiroom Wireless 2.1 Plate Amp User Manual
- June 5, 2024
- Arylic
Table of Contents
Arylic NEW003 Up2Stream Plate Amp 2.1 Multiroom Wireless 2.1 Plate Amp
Introduction
Up2Stream Plate AMP 2.1 is a WiFi and Bluetooth 5.0 2.1 channel plate
amplifier that is easy for you to build your own high-quality wireless
streaming speakers. Up2Stream Plate AMP 2.1 is a full-range Class D plate
amplifier provides 50W L&R channels and 100W subwoofer, 3.5mm Aux input,
Optical input, USB input for PC connection, Volume, Tone and Bass rotary knob
for sound adjustment. Once connected to your home network, using our 4Stream
app you can play music from your mobile, NAS or from online streaming services
like Spotify, Deezer, Tidal, Qobuz and more. With multiple devices, you can
form a multiroom audio system and play the same music to each room in sync or
play different music to different rooms.
What’s in the Box
Interface
-
WiFi Antenna: Socket Use to connect the antenna to receive WiFi signal.
-
BT Antenna: Socket Use to connect the antenna to receive Bluetooth signal.
-
Bass: Knob Knob for changing Bass level.
-
Tone: Knob Knob for changing treble level.
-
Volume: Knob Knob for changing the volume level. Press to switch source input.
-
Ethernet Port: For network connection using RJ45 cable.
-
Mode button: Press once to switch source input. Quickly Press twice to reset the WiFi/Bluetooth connection. Quickly Press three times to do a factory reset. Long Press to turn on the device, press again to turn on.
-
Aux in: For connection of analog audio signal using a 3.5mm to 3.5mm or 3.5mm to RCA cable.
-
Opt-in: For connection of digital audio signal using an optical/Toslink cable.
-
USB port: For connection to PC toast as USB DAC or to use our DSP tool ACPWorkbench.
-
DC port: Use to connect the 12V-24V power supply.
-
PH2.0-9P: WPS: Pins used for connecting external mode
button W-LED, B-LED, L-LED, U-LED: Pins used for connecting external LED status light KEY: Pins used for connecting external button board IR: Pins used for connecting external IR receiver -
SW -/+: Subwoofer speaker socket
-
L -/+: Left Channel speaker socket
-
R -/+: Right Channel speaker socket
How To Use
App Download
Download the 4STREAM application from App Store for iOS-based devices and
Google Play Store for Android-based devices.
The application supports English, Spanish, French, German, Italian,
Portuguese, Korean, Simplified Chinese, Traditional Chinese and Japanese
First Time Usage & BLE WiFi Setup
- Power up the device.
- Make sure your mobile has connected to your home network using 2.4G and your GPS and Bluetooth is on.
- Open the 4Stream APP and wait for device discovery. This will take a couple of seconds.
- 4Stream will ask to check the indicator, there is no LED light on this device, just click on the indicator is blinking. (You can connect your own LEDs with the LED Pins or purchase and use our expansion board: button board)
- For Android device, the system will ask for permission to use GPS data & File storage, please click accept to continue. This GPS permission is setup by Google for BLE usage, once setup is finish you can go to system settings and disable it, file storage permission is to let 4Stream access your mp3 files store in your mobile.
- 4Stream APP will list out all the device available for setup, choose the one you want.
- 4Stream APP will then ask you to choose the network you want the device to connect to, and choose the one you want to connect.
- Now enter a password for your network, if this is not the network you want the device to connect, you can change it to the desire one.
- Then you can change the name of the device. You can select a preset one or enter your own.
- After you define the name of the device, you will see it appears in the device list in the 4Stream APP and now you can start streaming music.
*If you change to another router, or the password of the connected router has been changed, please quickly press the mode button twice in WiFi mode to reset the WiFi connection.
Connection via LAN
Plug in the RJ45 cable to the ethernet port, the device auto connects to your
home network and will show on the app in about 10 seconds. (Note: your mobile
phone and the device must be in the same network.)
Bluetooth
To use Bluetooth, switch to Bluetooth via the 4Stream APP or by pressing the
Volume knob or mode button. Then find the Bluetooth device SoundSystem_XXXX
from your phone’s Bluetooth setting and pair it. If you have changed the
device name, “SoundSystem” will become the device name you changed.
USB Audio
Power up and connect the device to your PC with USB cable. The PC will
automatically discover a USB sound card and when you select it as the system
audio output, the PC will send the audio output to the device in digital
(44.1kHz/16bits). You can stream audio to other Up2Stream devices over
multiroom functions.
Note: There is about 3 seconds delay for multiroom slave devices.
Multiroom Function
You can group multiple devices to form multiroom/multizone in the 4Stream APP.
Just click on the + icon on one of the devices and select other devices as
slave device. The master device then can stream music and sync to all slave
devices in different rooms.
Web Player Interface
Enter the ip address of the device in a web browser and you can access the web
player interface. The web player can let you play/pause the current song, go
previous or next song, control the volume, access the Pre-set songs you define
in the 4Stream APP, enter the internet radio URL to listen to radio, setup
wifi connection, setup static ip address, do manual firmware update and
factory reset. *You can check the device ip address in the 4stream app, click
on device settings icon, and select speaker info.
If you want to setup wifi in this interface, connect this device (SSID:
SoundSystem_xxxx) to your phone/pc wifi directly, the default ip address is
10.10.10.254. ***The default password is admin.
Up2Stream ACPWorkbench (Sell Separately)
Connect the device to your PC with USB cable, open the windows program
ACPWorkbench and you can tune audio effects conveniently in real-time,
including music noise suppressor, virtual bass, stereo widener, exciter, 10
bands EQ, configure output channel and PINs definition. After editing the
audio effects, you need to save the changes to the device for the effects to
remain. You can get more information from our website.
Firmware Update
The application will notify you in app when there is a new firmware available.
It is recommended to update the firmware whenever it is available, as this
might not only correct bugs or improves performance, but also might add new
features or services.
Specification
Scan the QR codes below for more
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>