Shenzhen Nanxiangzi Technology T95 Smart TV Box User Manual
- June 6, 2024
- Shenzhen Nanxiangzi Technology
Table of Contents
Shenzhen Nanxiangzi Technology T95 Smart TV Box
Getting Started
Basic Operations
Power On/ Off and Sleep
- Connect the box to the TV with HD cable, connect box to the power adaptor, Connect mouse, air mouse or other input devices with USB port
- After the device and cable connected .power led turn to blue .
- After the device and cable disconnected, Power LED turns off
- Under power on mode, press remote control’s power button, device is entering into sleep mode.
- Under sleep mode, device will be wake when you press remote control’s power button,
Open applications
Use remote control’s arrow keys to choose the wanted program, click OK
button to open the selected program
Switch in the applications
Click ‘My Apps” to view recently used programs, dick program icon to switch
application arbitrarily
Close Applications
Click icon □ * to view recently used programs, choose one of them by click
and hold, drag it to blank area to close the application
Back To Home Screen
- Click icon 0 to return to home screen
- Click icon @ on remote control to return to home screen
Read External Storage Data
Read U Disk Insert U flash disk or removable hard disk into USB port in the
status of power on, icon USB appears in top left corner of the desktop, open
TileBrowser”, the identified USB(A:) will appear under “Local Disk”, U disk’s
operation is available now
Read TF card Insert TF card into the device in the status of power on, when icon |’i appears in top left comer of the desktop, open “FileBrowser”, the identified External Storage Card will appear under “Local Disk”, TF card’s operation is available now
WIFI Function
Home Screen -> Settings —Network，Select “Wi-Fi” to open WIFI function
Choose hotspot 今 Input Password 今 Connect to the network
Ethernet Function
Home Screen -> Settings —Network— Select “Ethernet’ to open Ethernet function
WLAN Hotspot
Operations on the box:
Home Screen -> Settings —Other—More Setting->Portable hotspot-> Select
“Portable Wi-Fi
Select KSet up Wi-Fi hotspot” to set up “Network SSID security Password w parameters
Ensure connected to the wired network, the box can be used as wireless AP to support more wireless devices access in the family
The Step that how to reflash the box
- Uncompress the downloaded firmware(ROM) to the root of and SD/TF card (format your card first).
- Insert the SD Card into powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert into the AV port of Box, press and hold the hidden button while plugging power in.Do not release until you see the screen of Robert Logo.
- Update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
- When system has rebooted then you should first check to ensure wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interferenceto radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>