Shenzhen Nanxiangzi Technology T95H Android TV User Manual
- June 5, 2024
- Shenzhen Nanxiangzi Technology
Table of Contents
Shenzhen Nanxiangzi Technology T95H Android TV
Basic Operations
Power On/ Off and Sleep
- Connect the box to the lV with an HDMI cable, connect the box to the power adaptor, Connect the mouse, air mouse, or other input devices with a USB port
- After the device and cable connections, the power lead turns blue.
- After the device and cable are disconnected, Power LED turns off
- Under power-on mode, press the remote control’s power button, device is enter sleep mode.
- Under sleep mode, the device will be wake when you press the remote control’s power button,
Open applications
Use the remote control’s arrow keys to choose the wanted program, click the OK button to open the selected program
Switch in the applications
Click “My Apps” to view recently used programs, click the program icon to switch applications arbitrarily
Close Applications
Click the icon to view recently used programs, choose one of them by click and
hold, drag it to a blank area to close the application
This function only operated in the condition of Mouse mode
Back To Home Screen
Click the icon to return to the home screen
Click the icon on the remote control to return to the home screen
Read External Storage Data
Read U Disk
Insert U flash disk or removable hard disk into the USB port in the status of
power on, icon appears in the top left corner of the desktop, open
“FileBrowser”, the identified USB(A:) will appear under “Local Disk”, U disk’s
o eration is available now
Read TF card
Insert TF card into the device in the status of power on, when the icon
appears in top left corner of the desktop, open “FileBrowser”, the identified
External Storage Card will appear under “Local Disk”, TF card’s operation is
available now
WIFI Function
Home Screen ➔SETTINGS➔Network➔ Select “Wi-Fi” to open the WIFI function
Ethernet Function
Home Screen ➔SETTINGS➔ Network➔ Select “Ethernet” to open the Ethernet
function
Insert network cable, the network will be connected automatically
WLAN Hotspot
Operations on the box
Home Screen ➔ SETTINGS ➔ Other ➔ More Setting ➔ More … ➔ Portable hotspot ➔
Select “Portable Wi-Fi hotspot”
Select “Set up Wi-Fi hotspot” to set up “Network SSID “, “Security”,
“Password” parameters 
Ensure connected to the wired network, the box can be used as a wireless AP to support more wireless devices access in the family
The Step that how to reflash the box
- Uncompress the downloaded firmware (ROM) to the root of an SD card(format your SD card first).
- Insert the SD Card into the powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert it into the AV port of the Box, press, and hold the hidden button while plugging the power in. Do not release until you see the screen of Robert Logo.
- The update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
- When the system has rebooted then you should first check to ensure the wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.
Product Declare
Legal notice: Special reminder that this product is only for overseas
use, The content of installed should comply with the relevant local laws and
regulations, In case of any violation of laws and regulations The manufacturer
does not bear the result.
Manufacturers promise: The content of the manufacturer preinstalls, complies with local laws and regulations, and does not involve illegal content.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>