Shenzhen Nanxiangzi Technology T95 Mini Android TV Box User Manual
- June 5, 2024
- Shenzhen Nanxiangzi Technology
Table of Contents
Nanxiangzi Technology T95 Mini Android TV Box
User Manual
Getting Started
Basic Operations
Power On/ Off and Sleep
- Connect the box to the TV with HD cable, connect the box to the power adaptor, Connect the mouse, air mouse, or other input devices with a USB port
- After the device and cable connections, the power lead turns blue.
- After the device and cable are disconnected, Power LED turns off
- Under power-on mode, press the remote control’s power button, and the device is entering into sleep mode.
- Under sleep mode, the device will be wake when you press the remote control’s power button
Open applications
Use the remote control’s arrow keys to choose the wanted program, and click
the OK button to open the selected program
Switch in the applications
Click “My Apps” to view recently used programs, and click the program icon to switch application arbitrarily
Close Applications
Click the icon to view recently used programs, choose one of them by click and hold, and drag it to the blank area to close the application
This function only operated in the condition of Mouse mode
Back To Home Screen
Click the icon to return to the home screen
Click the icon on the remote control to return to the home screen
Read External Storage Data
Read u Disk
Insert U flash disk or removable hard disk into the USB port in the status of
power on, icon USB appears in the top left corner of the desktop, open
“FileBrowser”, the identified USB(A:) will appear under “Local Disk”, U
disk’s operation is available now
Read TF card
Insert TF card into the device in the status of power on, when the icon
appears in the top left corner of the desktop, open “File Browser”, the
identified External Storage Card will appear under “Local Disk, TF card’s
operation is available now
WIFI Function
Home Screen → Settings → Network → Select “Wi-Fi” to open the WIFI function
Choose hotspot → Input Password → Connect to the network
Ethernet Function
Home Screen → Settings → Network → Select “Ethernet” to open the Ethernet
function
Insert network cable, the network will be connected automatically
WLAN Hotspot
Operations on the box :
Home Screen → Settings → Other → More Setting → Portable hotspot → Select
“Portable Wi-Fi hotspot”
Select “Set up Wi-Fi hotspot” to set up “Network SSID”,” Security”. and” Password” parameters
- Ensure connected to the wired network, the box can be used as a wireless AP to support more wireless devices access in the family
The Step that how to reflash the box
- Uncompress the downloaded firmware(ROM) to the root of and SD/TF card(format your card first)
- Insert the SD Card into the powered-off Box (power cable not plugged in) with no external USB storage attached.
- Using a toothpick, insert it into the AV port of the Box, and press and hold the hidden button while plugging the power in. Do not release until you see the screen of Robed Logo.
- The update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
- When the system has rebooted then you should first check to ensure the wifi is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.