SKY BOX MR263C4 GBF Wi-Fi IP Connector User Manual
- June 6, 2024
- SKY BOX
Table of Contents
SKY BOX MR263C4 GBF Wi-Fi IP Connector User Manual
Install app “doordeer” before setup an indoor monitor
in APP store（iPhone or iPad） or google play（Android mobile phone）
Installation and Sign up user account
After installation， You can sign up an user account.
Choose the nearby service region for better user experience.
Add Skybox into APP
GBF SKYBOX support both WIFI and RJ45 cable network connection.
If the device use RJ45 cable connection, make sure router and switch support DHCP and turn on your mobile phone WIFI setting and choose the same network as the SKYBOX connected. When click “add device”, APP will find the SKYBOX and you can add it into device list.
If the SKYBOX uses WiFi connection, please make sure to turn off your cell phone cellular data and connect your mobile phone to your local 2.4G wifi which is the same network that the SKYBOX will connect to.
Open Doordeer app and switch to left slider bar, click “AP Configuration”
to add your SKYBOX, see the following steps:
**Go to your phone wifi setting and connect your smart phone to this SKYBOX hotspot which is starting with cctvp2p-hhasawxxxxxx.
**
Continue AP configuration:
Then go back to Doordeer APP, the AP configuration will start automatically.
Check your wifi name and enter your wifi password:
The APP will automatically search your local 2.4G wifi and find your wifi
name, please double check that is the correct wifi for this SKYBOX to connect
or not. Then input your local 2.4G wifi password into the blank space twice,
then press “START CONFIGURATION”
Start AP configuration for the SKYBOX, and the following message will be shown on the APP screen, then click “Add Device”
Find the SKYBOX and add the SKYBOX:
The APP will find the SKYBOX and the new device will show in the window “SELECT THE DEVICE YOU WANT TO ADD”. Then click this Doorbell hhxxxx, it
will lead to your next page for naming the SKYBOX.
Naming SKYBOX:
You could add the new name for the SKYBOX first such as Unit 101 etc.. Then
click “CONFIRM”.
After you successfully add this new SKYBOX into your APP, you will see this
SKYBOX on your front page of the APP.
Access SKYBOX from Doordeer APP:
After the SKYBOX is successfully added into your APP, you will see your room
in Doordeer APP. You could access your outdoor station camera and watch, hear,
speak and unlock from your smart phone.
Tips
A. During adding the SKYBOX to your smart phone
Please make sure to turn off your smart phone Cellular Data, and connect your smart phone to your local 2.4G wifi connection if you try to use wifi connection with your SKYBOX.
GBF Customer Support Contact:
Phone: 1-604-278 6896 or 1-604-285 8721
Email: info@gbfelectronics.com
URL : www.gbfelectronics.com