MAC AUDIO PRO FLAT 2.20 Component Speakers User Manual

MAC AUDIO PRO FLAT 2.20 Component Speakers

At the end of the product’s useful life, please dispose of it at the appropriate collection points provided in your country.

DEAR CUSTOMER,
We congratulate you on acquiring this MAC AUDIO Car Stereo Product.

Please read these instructions carefully to ensure optimum and disturbance- free functioning of the appliance. Technical modifications reserved.

POSITIONING AND SECURING THE SPEAKER SYSTEM

POSITIONING AND SECURING THE SPEAKER SYSTEM (FIG. 1)
Use the mounting positions provided in your vehicle. If the speakers do not fit, they can be placed on the rear window shelf.

Fig. 1

1. Depth
2. Driver diameter

Fig. 1A

1. Use a mounting ring to mark the position of the speaker opening and fastening holes
2. Cut out opening and drill holes

Make sure that the subwoofer is secured in such a way that it cannot slip or slide. Use the screws provided for this purpose. Damage resulting from sudden speed changes (e.g. hard braking) is not covered under the terms of our guarantee.

CONNECTING TO THE RADIO/AMPLIFIER

CONNECTING TO THE RADIO/AMPLIFIER (FIG. 2)

• The speaker system should preferably be connected to an external power amplifier. This can provide the required electrical power and create corresponding dynamic reserves. The relevant instructions also contain the customized connection diagram for the operation of a speaker system.
• Should you not have a power amplifier, the speakers can also be connected directly to the radio. The relevant operating instructions also contain the connection diagram for this situation.
• Please note that only limited dynamic reserves will be available in this case. Excessively low outputs combined with high distortions can destroy your speakers.

INSTALLATION

INSTALLING THE TWEETER (PRO FLAT 2.20 / 2.16 / 2.13) (FIG. 3)

INSTALLING THE GRILLE (FIG. 4)

TECHNICAL DATA

 | Load capacity RMS/max.:| Impedance (nominal):| Frequency range:| Cutoff frequency(-ies):| Response:
---|---|---|---|---|---
Pro Flat 2.20| 100/350 W| 4 Ω| 32 – 28 000 Hz| 3 400 Hz| 91 dB
Pro Flat 2.16| 80/280 W| 4 Ω| 36 – 28 000 Hz| 3 400 Hz| 91 dB
Pro Flat 2.13| 70/250 W| 4 Ω| 38 – 28 000 Hz| 3 400 Hz| 90 dB
Pro Flat 16.2| 70/250 W| 4 Ω| 36 – 28 000 Hz| 3 400 Hz| 91 dB
Pro Flat 13.2| 60/220 W| 4 Ω| 38 – 28 000 Hz| 3 400 Hz| 90 dB
Pro Flat 10.2| 50/180 W| 4 Ω| 40 – 28 000 Hz| 3 400 Hz| 89 dB

Congratulations

You have made a wise selection in becoming the owner of MAC AUDIO HiFi equipment. Due to high quality MAC AUDIO HiFi products have earned an excellent reputation throughout the Western world. This high-quality standard enables us to grant a 3-year warranty for MAC AUDIO HiFi products.

The equipment is checked and tested continuously during the entire production process. In case you have problems with your MAC AUDIO HiFi equipment, kindly observe the following:

1. The guarantee period commences with the purchase of the component and applies only to the original owner.
2. During the guarantee period, we will rectify any defects due to faulty material or workmanship by replacing or repairing the defective part at our discretion. Further claims, and in particular those for price reduction, cancellation of sale, compensation for damages or subsequential damages, are excluded. The guarantee period is not altered by the fact that we have carried out guarantee work.
3. Unauthorized tampering with the equipment will invalidate this guarantee.
4. Consult your authorized dealer first, if guarantee service is needed. Should it prove necessary to return the component to the factory, please ensure that the component is packed in original factory packing in good condition the quality control card has been filled out and enclosed with the component your enclose your receipt as proof of purchase.
5. Excluded from the guarantee are:
   • Illuminates
   • Wear parts
   • Shipping damages, either readily apparent or concealed (claims for such damages must be lodged immediately with the forwarding agent, the railway express office or the post office).
   • Scratches in cases, metal components, front panels, etc. (You must notify your dealer directly of such defects within three days of purchase.)
   • Defects caused by incorrect installation or connection, operation errors (see operating instructions), overloading or external force.
   • Equipment that has been repaired incorrectly or modified or where the case has been opened by persons other than us.
   • Consequential damages to other equipment.
   • Reimbursement of cools, without our prior consent, when repairing damages by third parties.

WARRANTY CARD

Contact Information

• Lise-Meitner-Str. 9 D-50259 Pulheim Germany
• Tel. +49 (0) 2234 807-0
• Fax+49 (0) 2234 807-399
• www.mac-audio.de.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>