brondell WS-12 Rinslet Bidet Attachment Owner’s Manual
- June 6, 2024
- brondell
Table of Contents
Owner’s Manual
BIDET ATTACHMENT WS-12
ATTACH PROOF OF PURCHASE TO THIS PAGE
RINSLET WS-12 OWNER’S MANUAL
Product Features
- Separate Front (feminine) and Rear wash nozzles
- Hygienic retractable nozzles
- High-quality ABS material with a full-body panel
- Ambient temperature bidet wash
- Adjustable water pressure
- Ceramic-core internal valve
- High-quality metal ⅞” T-valve
- Durable braided metal cold water hose
- No electricity or batteries required
- Easy installation and adjustable toilet fit
- All accessories included for standard installation
- One-year warranty
PRODUCT INFORMATION
Product Components
|
Bidet attachment with ergonomic control
---|---
| Adjustable mounting brackets (2)
| T-Valve connector with included rubber cone
Washer (⅞” x ⅞” x ⅜”)
| 27½” braided metal bidet hose
| Teflon Tape
Product Dimensions
Before Installation
IMPORTANT
Please be advised that the provided T-Valve should be installed at the Fill
Valve under the toilet tank, and NOT at the cold water supply coming from the
wall.
If you do not have access to the Fill Valve under the toilet tank, contact
Brondell Customer Service at 888.542.3355. We may be able to provide
alternative options.
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the
water shut-off valve at the wall. If it is a rigid pipe, you will need to
purchase a flexible water supply hose to replace it before installing the
Rinslet. The length of the hose you purchase may vary, but the top connection
size should be ⅞” Ballcock (to connect to the T-valve that you will install
under the toilet tank), and the bottom connection will be 3/8” or ½” female
compression (to connect at the shut-off valve at the wall).
Installing the Bidet Attachment
-
Remove the existing toilet seat.
a. Lift hinge covers and use flathead or Phillips head screwdriver to remove the mounting bolts. Alternatively, you may need to loosen mounting bolts underneath the seat.
b. Remove the toilet seat and set the seat, mounting bolts, and hardware aside.
-
Turn off the water supply valve and flush the toilet.
a. Turn off the water supply at the wall to stop the flow of water.
b. Flush toilet and hold down handle to completely empty toilet tank.
c. Disconnect the water supply hose from the fill valve under the toilet tank.
-
Connect ⅞” T-Valve to Water Supply Line and Fill Valve under Toilet Tank.
a. Install the ⅞” T-valve with an included rubber washer to the incoming water connection on the bottom of your toilet tank. Ensure the the rubber washer is properly seated, tapered side up.
b. Connect the cold water supply line coming from the wall to the bottom of the T-valve.
-
Connect the Bidet Hose to the T-Valve.
a. The ends of the bidet hose are two different sizes. Determine which is the smaller of the two ends.
b. Connect the smaller end of the braided metal bidet hose to the remaining open side of the installed T-valve.
-
Install Adjustable Mounting Brackets into the Bidet Attachment
a. Line up the dots of one of the adjustable mounting brackets with the dots around one of the open mounting bracket holders.
b. Push the bracket into the bracket holder until it snaps into place.
c. Repeat Steps 1 and 2 to install the other adjustable mounting bracket. -
Install Bidet Attachment on Toilet.
a. Place bidet attachment on the toilet with the nozzles close to the back of the toilet, leaving a slight gap between the toilet and
the nozzles. This will vary by the toilet.
b. Make sure the adjustable brackets line up with the holes in the toilet fixture. You may need to rotate the adjustable brackets accordingly to line up properly.
c. Replace the toilet seat on top of bidet attachment and secure using original toilet seat hardware. Make sure to tighten so that the bidet attachment and seat do not move.
d. Ensure the control knob is lying flat and isn’t turned to one of the operating positions to prevent water from accidentally spraying out of the toilet bowl. -
Connect the Bidet Hose to the Bidet Attachment Connect the open end of the bidet hose to the connection underneath the bidet attachment.
-
Turn on the Water Supply and check for leaks.
a. Open the main water supply valve slowly and check for leaks.
b. Wait 5-10 minutes, check again and if there are no leaks, continue.
NOTE: If there is any leaking, check all rubber washers and make sure all water connections are tight and secure. If necessary, you can use the provided Teflon Tape (Plumber’s Tape) for any leaking connections.
PRODUCT OPERATION
Use and Maintenance
Using the Rinslet
To activate a wash function, turn the control knob to the left for a Front
(feminine) wash, or to the right for a Rear wash.
- The further the knob is turned, the higher the water pressure will be.
- To lower the water pressure, turn the knob back towards the center.
- To stop the flow of water, rotate the knob to center so it sits flat.
Cleaning the Rinslet
To clean the nozzles, open the Nozzle Guard door by pulling it gently open on
the right side. With the nozzle revealed, pull down on the nozzle cap, and
clean the spray holes and nozzle using a toothbrush or soft cloth and mild
detergent (such as dish soap). When cleaning, be careful not to drop or flush
the nozzle cap. Periodically tighten the cap so it doesn’t become loose with
use and cleaning. To clean the Rinslet, use a mild cleaner such as Simple
Green or Windex spray. Do not scrub or use harsh, abrasive products to clean
the Rinslet, as they may scratch the product.
Short Term Non-Use
If the product will not be used for more than a few weeks, you may consider
shutting the water supply off at the wall for extra precaution.
TECHNICAL INFORMATION
Warranty
Brondell products are backed by some of the most comprehensive warranties in
the industry. Brondell warrants that all products (excluding consumable items)
shall be free from defects in material and workmanship under normal use and
service. Rinslet WS-12 Residential One-Year Limited Warranty
100% Coverage of all parts and labor for the entire product for the first year
from the original date of purchase.
Rinslet WS-12 Commercial Warranty
Warranty period 1 year from original purchase date for all Brondell products.
Warranties may not apply to products that are used for heavy commercial,
hospital, or other high use non-residential applications.
Exclusions and Limitations
-
BRONDELL warrants its products to be free from manufacturing defects under normal use and service. This warranty is extended only to the ORIGINAL PURCHASER.
-
BRONDELL’s obligations under this warranty are limited to repairs or replacement, at BRONDELL’s option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with instructions. BRONDELL reserves the right to make such inspections as
may be necessary in order to determine the cause of the defect. BRONDELL will not charge for labor or parts in connection with warranty repairs for the first full year from the date of purchase on all products except those that may be subject to commercial use limitations. -
BRONDELL is not responsible for the cost of removal, return (shipping), and/or re-installation of products. This warranty does NOT apply to:
• Damage or loss which occurs during shipment.
• Damage or loss sustained through any natural or man-made causes beyond the control of
BRONDELL, including but not limited to fire, earthquake, floods, etc.
• Damage or loss resulting from sediments or foreign matter contained in a water system.
• Damage or loss resulting from negligent or improper installation including installation of a unit in a harsh or hazardous environment.
• Damage or loss resulting from removal, improper repair, modification of the product, or improper maintenance including damage caused by chlorine or chlorine related products -
This warranty gives you specific legal rights. You may have other rights which vary from state to state. THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY BRONDELL. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. BRONDELL SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL, FOR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY THE PURCHASER OR FOR LABOR OR OTHER COSTS DUE TO INSTALLATION OR REMOVAL OR COSTS OF REPAIRS BY OTHERS, OR FOR ANY OTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOT APPLY TO YOU.
How to Obtain Service
To obtain repair service under this warranty, you must contact an authorized BRONDELL Service Center to obtain an RMA (Return Merchandise Authorization) number. Proof of purchase in the form of a copy of the original receipt must accompany the returned unit for the warranty to be valid. Take or ship the unit pre-paid to the closest Brondell authorized service center along with the RMA number and proof of purchase.
To obtain the RMA number and locate the BRONDELL Service Center location nearest you, please call 1-888-542-3355.
Contact:
Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Phone: 1-888-542-3355
Email: support@brondell.com
Web: www.brondell.com
For questions, contact Brondell
Customer Service: 1-888-542-3355
Manufactured by:
Brondell, Inc.
PO Box 470085
San Francisco, CA 94147-0085
Please retain receipt records for any warranty claims.
a healthy home experience
brondell.com
#20WS12-1123
Documents / Resources
|
brondell WS-12 Rinslet Bidet
Attachment
[pdf] Owner's Manual
WS-12, Rinslet Bidet Attachment
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>