anko 42958352 Pet Toy Laser LED Ball Instruction Manual
- June 6, 2024
- Anko
Table of Contents
LASER BALL
Keycode:42958352
Technical specification.
- Batteries: 2X 1.5V AA (not included ).
- The ball has a 15min timer feature. Press the button, for the Ball to move forwards or backward, the ball also shoots out a laser light whilst moving.
Battery Installation & Set-Up
- Open the two sides’ cover.
- Use a screwdriver to remove the screw on the battery cover.
- Insert 2 x 1.5V AA batteries (not included) and then replace the battery cover.
- Use a screwdriver to lock the screw securely.
- Close the two sides cover.
Warning
- Do not aim the laser light directly into the eyes of pets or people.
- Pets should be supervised while playing with this product.
- Pet toy-Not intended for children.
- It is the responsibility of the pet owner if this toy is suitable for their pet’s style of play.
- No pet toy is indestructible and can be damaged during play.
- For your pet’s safety, inspect regularly and remove if damaged.
- Always supervise your pet during play.
- Batteries are to be inserted with the correct polarity.
- Do not mix different types of batteries or new and used batteries.
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are only to be charged under adult supervision.
- Rechargeable batteries are to be removed from the pet toy before being charged.
- The supply terminals are not to be short-circuited.
- Remove batteries from the pet toy when not in use for an extended time or when batteries become exhausted.
- Battery installation by an adult is required.
- Dispose of batteries responsibly.
- Do not dispose of it in the fire.
This product is classified as a Class 1 laser product and contains a Diode
laser <1mW.
The instruction manual must be retained since it contains important
information.
MADE IN CHINA
42-958-352
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>