numskull 82333 Halo Gaming Locker Instruction Manual
- June 6, 2024
- numskull
Table of Contents
Xbox
Gaming Locker
CONTENTS: **
**
xl Gaming locker – Unit is supplied as a kit of parts for self-assembly see
instructions below:
Games and accessories not included:
ASSEMBLY GUIDE:
The unit is supplied as a kit of parts – see diagram for exploded view, simply clip into place and secure were shown with the screws provided.
Step 1: Take section 5 (drawer) and place it onto the slots on section 4
(base).| Step 2: Take Section l and connect to section 4 (base) connecting
posts.
---|---
|
Step 3: Take Section 1O and place into the slot of section l (observing
chamfered edge to the back).| Step 4: Take section 2 and place section 1O into
the slot as detailed in pie, this is achieved by angling section 1O.
|
Step 5: Push section 2 into section 4 (base) connecting posts.| Step 6: Take
section 3 and connect to sections l and 2 correct orientation is labelled L&R.
|
Step 7: Take section 8 and connect to section 3 using the provided screws and
screwdriver.| Step 8: Take section 6 (left door) and connect to the section
using the provided screws and screwdriver.
|
Step 9: Take section 7 (right door) and connect to section 2 using the
provided screws and screwdriver.| Step 1o: Take section 9 x 4 PCS and secure
into the slots provided in sections l & 2.
|
Complete!
FEATURES:
- All in one tidy
- Safe secure housing for your Games, Control pads and Headphones”
- Drawer provided for small accessories.
- Locker doors for concealment of games
To see a video on how to build this locker simply visit: https://youtube.com/NumskullDesigns
TECHNICAL SUPPORT
If you encounter a problem with your product, please go to
http://www.numskull.com and click Technical Support.
From there you will be able to access the “Frequently Asked Questions”
section, and contact details.
Alternatively, you can contact us at Email:
hello@numskull.com
International Telephone: +441707 502280
The names of actual products and companies mentioned on this product may be
the trademark of their respec tive owners. This product is not sponsored,
endorsed, licensed or approved by Sony, Microsoft, or Nintendo
WARRANTY INFORMATION
Worldwide, Rubber Road Ltd warrants to the consumer that all Numskull products
will be free from material defects and manufacturing flaws for a period of one
(1) year from the original date of purchase. Should the product appear to be
defective during the warranty period, immediately contact Technical Support,
who will indicate the procedure to follow? If the defect is confirmed, the
product must be returned to its place of purchase (or any other location
indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product will at
the Technical Supports option, be either repaired or replaced. Where
authorized by applicable law, the full liability of Rubber Road and its
subsidiaries (including for indirect damages) is limited to the repair or
replacement of the Numskull product. The consumer’s legal rights with respect
to legislation applicable to the sale of consumer goods are not affected by
this warranty.
This warranty shall not apply: (1) if the product has been modified, opened,
altered, or has suffered damage as a result of inappropriate or abusive use,
negligence, an accident, normal wear, or any other cause not related to a
material defect or manufacturing flaw; (2) in the event of failure to comply
with the instructions provided by Technical Support; (3) to software not
published by Rubber Road, said software is subject to a specific warrant
provided by its publisher.
AUSTRALIAN & NEW ZEALAND WARRANTY
These goods come with guarantees that cannot be excluded under the Australian Consumer Law and New Zealand Consumer Guarantees Act. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If purchased in Australia or New Zealand, this product comes with a one-year (12 months) warranty from the date of purchase. Defects in the product must have appeared within one year from the date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s returns policy and procedures. Any expense incurred as a result of returning the product to the retailer of purchase is the full responsibility of the customer.
NEW ZEALAND
FIVEIGHT Distribution Ltd
Unit B, 39 Westpoint Drive
Hobsonville
Auckland 0618, New Zealand
Phone: (64) 9 479 1530
Email:info@fveight.co.nz
Visit:http://www.fveight.co.nz| AUSTRALIA
Numskull Group
U 14 2A Church St
Drummoyne
NSW 2047, Australia
Phone:+44(0)1707502880
Email:hello@numskull.com
Visit:www.numskull.com
---|---
Registered Community Design 00796325 US Patent Pending
Made in
China
Documents / Resources
|
numskull 82333 Halo Gaming
Locker
[pdf] Instruction Manual
82333, Halo Gaming Locker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>