niceboy VOICE CALL PRO Conference Speakerphone User Manual
- June 6, 2024
- niceboy
Table of Contents
niceboy VOICE CALL PRO Conference Speakerphone User Manual
\
niceboy VOICE CALL PRO Conference Speakerphone
- Power on LED indicator
- Power speaker on/off – press to power speaker on/off.
- Power microphone on/off – press to power microphone on/off.
- Amplify/dampen speaker – used to control the speaker volume levels.
- mini USB port – used for connecting to a PC.
- 2.5 mm input – used for connecting an external microphone.
- 3.5 mm input – used for connecting external headphones.
- Speaker + omnidirectional microphone
CONNECTING TO A PC
Use the included USB cable to connect to a PC. Plug into the USB port (5) and connect the long end to the USB on your PC. Niceboy VOICE Call PRO is a Plug & Play device. The LED indicator (1) will flash blue when properly connected.
Notice: set this device as the default audio device for recording and playback. This can be done in the Windows settings (Control panel).
PARAMETERS
Microphone: omnidirectional, stereo
Frequency: 150Hz – 20kHz
Sensitivity: -33±3dB
Talking distance: max. 2 metres
Speaker: yes
Headphone input: yes, 3.5 mm Jack
Microphone input: yes, 2.5 mm Jack
Dimensions and weight: 130 x 150 x 51 mm, 117 grams
System requirements: Windows 8.1 and newer,
MacOS 10.1 and newer, USB 2.0
PACKAGE CONTENTS
Niceboy VOICE Call PRO
USB cable
Manual
The manual may be accessed in its electronic form at www.niceboy.eu under the support section. This product meets all basic EU regulation requirements placed upon it.