CARALARGA 80 x 120 Huipil Tapestry Instruction Manual
- June 1, 2024
- CARALARGA
Table of Contents
CARALARGA 80 x 120 Huipil Tapestry
The following manual can be used for the installation of the pieces mentioned below:
Components
Installation Instructions
- Upon receiving the box, it is important to check that it is placed face up. Remove the piece and place it on a clean surface.
- Once the wall where you will install your piece is clear, measure the location of your piece and make a mark. Once marked, use the Wall Cleat, a level, and a pencil to mark the corners and screw holes
- Hold the drill firmly and drill the holes previously marked with the depth of the anchors. Proceed to insert the anchors into the holes. Use a hammer if necessary.
- Overlap the Wall Cleat using the drill, drive in the screw to hold the bracket.
- Once the Wall Cleat is installed, load the piece (if necessary, with the help of one or more people) and connect the Wall Cleat to the Cleat.
- Using a wide-bristle brush, brush the cotton to add volume and remove any potential imperfections in the thread.
Care Recommendations
The Caralarga pieces are crafted with natural materials and fibres, requiring special care and maintenance. Please remove the piece from its box within a maximum period of 5 days upon reception. Install the piece away from direct sunlight and humidity. Brush the cotton threads with a wide-tooth comb or brush at least every six months. To clean the piece or remove dust, use a clean and dry cloth. Carefully vacuum the piece every four months to remove any accumulated dust.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>