NETGEAR WAX610 Insight Managed WiFi 6 AX1800 Dual Band Access Point Installation Guide
- June 6, 2024
- NETGEAR
Table of Contents
Installation Guide
Insight Managed
WiFi 6 AX1800
Dual Band Access Point
Model WAX610
Package contents
|
---|---
Access Point Model WAX610| Mounting bracket with screw holes for mounting to a
solid ceiling or 15/16 in.
(23.8 mm) T-bar.
|
Mounting bracket without screw holes for mounting to a 9/16 in. (14.3 mm)
T-bar.| Two screws and anchors for ceiling- or wall mounting
Note: Depending on the product ordered, the package might not include a power adapter. You power up the access point by connecting it to a PoE+ switch. However, as an option, you can order a power adapter.
Installation options
You can mount the access point to a solid surface (a wall or a ceiling) or to
a ceiling with a 9/16 in. (14.3 mm) or 15/16 in. (23.8 mm) T-bar, or you can
install the access point freestanding on a flat surface.
We recommend that you use a flat Ethernet cable so that the cable fits in the
narrow space between the access point and the surface on which it is mounted
or placed.
Mount to a solid wall
The bottom of the access point includes two holes that let you mount the
access point on two screws inserted in a wall.
-
Mark the wall where you want to insert the provided anchors and screws, which must be 3.875 in. (98.5 mm) apart, and insert the anchors and screws.
Leave about 0.25 in. (6 mm) of each screw protruding from the wall so that you can insert the screws into the holes on the bottom of the access point. -
Line up the holes on the bottom of the access point with the screws in the wall and mount the access point to the wall.
Mount to a T-bar
-
Depending on the size of the T-bar, slide the 9/16 in. (14.3 mm) or 15/16 in.
(23.8 mm) bracket between the guides on the bottom of the access point until it locks in place. The locking tab must be at the front of the access point.
-
Hold the access point upside down.
Note: If you can reach behind the T-bar, hold the T-bar with one hand and the access point with your other hand. -
Align the rectangular protruding part of the bracket with the T-bar.
-
Hook the bracket onto one side of the T-bar.
-
Hook the bracket onto the other side of the T-bar until the bracket locks onto the T-bar.
Mount to a solid ceiling
-
Using the anchors and screws provided, attach the 15/16 in. (23.8 mm) bracket with the screw holes to the ceiling.
The rectangular protruding part of the bracket must be facing the ceiling. -
Hold the access point upside down with the front of the access point facing the bracket. Then, line up the guides on the bottom of the access point with the bracket.
-
Slide the access point into the bracket until it locks in place. The locking tab must be at the front of the access point.
Note: To unlock the access point, push the locking tab toward the ceiling and slide the access point out of the bracket.
Overview
1. Power/Cloud LED
2. LAN LED
3. 2.4 GHz WLAN LED
4. 5 GHz WLAN LED| 5. Reset button
6. LAN/PoE+ port
7. DC power connector
---|---
Register the access point in NETGEAR Insight
-
On your mobile device, visit the Apple App Store or Google Play Store, search for NETGEAR Insight, and download the latest version of the app.
-
Open the NETGEAR Insight app.
-
If you do not own a NETGEAR account, tap Create NETGEAR Account and follow the instructions.
-
Enter the email address and password for your account and tap login.
-
Tap + in the upper right corner.
-
Either use the camera on your phone to scan the QR code or barcode, or type in the serial number.
-
Follow the instructions to register the device.
Connect the access point to a PoE+ switch
Power up the access point by connecting the LAN/PoE+ port to a PoE+ switch
that supplies 802.3at (PoE+) power.
The LAN/PoE+ port supports Ethernet speeds up to 2.5 Gbps. The following
figure shows a NETGEAR MS510TXPP switch, which supports speeds of 2.5 Gbps and
higher.
However, if your Internet connection, modem, and switch support a speed of 1
Gbps (which is a common speed), the access point LAN connection functions at 1
Gbps.
The access point receives an IP address from a DHCP server (or a router that
functions as a DHCP server) in your network. If your network does not include
a DHCP server, the access point uses its default IP address 192.168.0.100.
Login/Reset Instructions
During installation and setup, the access point’s LEDs can light in these
colors:
Power/Cloud (one of two
management options)| |
Solid green. The access point started up and functions either as a standalone access point or as an Insight discovered access point that is not connected to the Insight cloud-based management platform.
---|---|---
| Solid blue. The access point functions in Insight mode and is connected to
the Insight cloud-based management platform.
LAN (one of the two-speed options)| | Solid green. The LAN port detects a
speed of 2.5 Gbps.
|
Solid amber. The LAN port detects a speed of fewer than 2.5 Gbps, such as 1 Gbps (which is a common speed).
2.4 GHz WLAN| | Solid green. The 2.4 GHz radio is operating without clients.
5 GHz WLAN| | Solid green. The 5 GHz radio is operating without clients.
For more information about the LEDs, see the user manual, which you can download by visiting netgear.com/support/product/WAX610.
Configure the access point with NETGEAR Insight
Make sure that the switch to which the access point is connected to the Internet.
-
Connect your mobile device to the access point’s default SSID.
The default SSID is on the access point label on the bottom of the access point and is shown in the format NETGEARxxxxxx-SETUP, where xxxxxx are the last six hexadecimal digits of the access point’s MAC address. The default password is a shared secret. -
Open the NETGEAR Insight app.
-
Enter the email address and password for your Insight account and tap LOG IN.
In most situations, Insight detects the access point automatically. This process can take several minutes. -
Select the access point and tap Next.
You are prompted to add the access point to an Insight network location. -
Create a new network location, tap Next, and then tap OK.
The device admin password that you entered for the new network location replaces the existing admin password on all devices that you add to the network location.
Your Insight network location is now set up and the access point is added to the network location. -
If prompted, name the access point and tap Next.
The access point automatically updates to the latest Insight firmware. This might take up to 10 minutes, during which the access point might restart.
The access point is now an Insight-managed device that is connected to the Insight cloud-based management platform. If the Power/Cloud LED was solid green, it now lights solid blue. -
Use the Insight app to configure and manage the access point.
Other setup methods
If you are an Insight Premium or Insight Pro subscriber, you can use the
NETGEAR Insight Cloud portal to set up the access point.
To set up the access point, you can also use the access point’s local browser
user interface (UI). For more information, see the user manual, which
you can download by visiting
netgear.com/support/product/WAX610.
Support and Community
Visit netgear.com/support to get your questions
answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à https://www.netgear.com/support/download/. (If this
product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.See the
regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-
policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-
conditions. If you do not
agree, return the device to your place of purchase within your return period.
Do not use this device outdoors.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference
purposes only.
May 2020
References
- Access Point Login
- English - NETGEAR Communities
- NETGEAR - Common Account Management
- NETGEAR Support | NETGEAR
- Download Center | Downloads and Documentation | NETGEAR
- Download Center | Downloads and Documentation | NETGEAR
- WAX610 | Insight Managed Access Point | NETGEAR Support
- NETGEAR Privacy Policy | NETGEAR
- Insight Cloud Portal
- How do I use NETGEAR's one year of Insight included subscription? | Answer | NETGEAR Support
- Which domains and ports should I open on my firewall for my Insight Managed devices? - NETGEAR Support
- What do I do if I my browser displays a security message? - NETGEAR Support
- NETGEAR: Advanced WiFi & Networking
- What is NETGEAR | Company Info | NETGEAR
- NETGEAR Support | NETGEAR
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>