Humixx CTVK42 Car Mount User Manual

Humixx CTVK42 Car Mount

Specifications

• Car Mount xl
• Suction Cup xl
• Dashboard Pad xl
• Air Vent Clip x1
• Guide xl

The parameters above are derived from the laboratory of HUMIXX.
The actual parameters would be different due to production process and other factors. The image shown here is indicative only.

Overview

Installation Steps

Method 1 – Using with the Suction Cup

Tips for Using the Suction Cup

1. Do not adhere the suction cup to curved surfaces, plush fabric or uneven surfaces. It will not be secure attached .
2. It is not recommended to attach the suction cup to the surface of leather, wall or glass film, because the suction cup with strong viscosity and attractiveness, which may cause surface damage.
3. If the suction cup is frequently used in high temperature, low temperature or humid conditions, the suction force will not stick firmly (Please avoid direct exposure to the sun).
4. After using for a period of time, if the suction is not sticky enough, please take down the suction cup base and wash it with warm water. It will be sticky again after drying.
5. Please protect the suction cup with plastic wrap after it is removed.

Tips for Placing the Dashboard Pad

Before installing the mount on uneven or textured surfaces, please firstly stick the dashboard pad on the dashboard (Once removed, it cannot be used again). Just stick tlhe pad on the dashboard and press it hardly for 1 min then let it rest for 1 to 3 days to have stronger stickiness.

Please wait for 24 hours to use the dashboard pad after stuck.

1. Unscrew the fixed nut from the car mount and remove it.
   

2. Pass the ball joint through the fixed nut from the smaller opening side.
   

3. Pushing the ball joint firmly into the groove on the back of the car mount, then tighten the fixed nut.
   

4. Clean the windshield or dashboard where you want to install the car mount with a wet cloth, wait for it to dry.
   

5. If the installation position is not smooth enough, it is recommended to use the dashboard pad in advance (Remove the red protective sticker of the dashboard pad, sticking and pressing it hard for more than 1 minute) then let it rest for 1 to 3 days to have high stickiness.
   Remove the transparent film on the other side of the dashboard pad, then install the suction cup on the pad, it would be more stable. (If no need to use dashboard pad, please go to step 6 directly).

6. Push the suction cup lock up to fully open it. Then attach the suction cup to the cleaning dashboard and press down the suction cup lock to secure the car mount.
   

7. Find the best view by adjusting the length and angle of the car mount to adapt to the driving environment.
   

Method 2 – Using with the Air Vent Clip

1. Unscrew the fixed nut from the car mount and remove it.
2. Pass the ball joint through the fixed nut from the smaller opening side
3. Pushing the ball joint firmly into the groove on the back of the car mount, then tighten the fixed nut .
4. Twist the screw knob to adjust the opening size of the clip to fit the air vent.
5. Find a suitable place to insert the car mount. Tighten the screw knob to fix the car mount. Adjust the angle of the car mount to fit your sight.
   

The Suitability of Car Air Vent

| Horizontal and Vertical

| Non-intensive, Circular or Special-shaped

Note: Please do not twist the air vent clip too tight, to protect the air vent blade and air vent clip.

Using Steps

1. Press the quick release button and the clamp arms will automatically open. Then, put your phone on the holder and pull the adjustable legs(bottom tray) according to the size of your phone to ensure that your phone is clamped securely.
   

2. Place your phone in the holder and press the clamp arms towards each other hard. Your phone will be secured by the arm clamps.
   

3. After using, please press the quick release button again to open the clamp arms and take out the mobile phone as shown in the picture.
   

Attentions

• Avoid dropping.
• Do not disassemble.
• Please install the car mount on a suitable place before driving, do not operate or adjust the car mount during driving.
• Do not install the car mount in places where it might interfere with airbag or driving.
• Keep the car mount away from children.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>