Govee H6052 Aura Table Lamp User Manual
- June 6, 2024
- Govee
Table of Contents
Govee H6052 Aura Table Lamp User Manual
Safety Instructions
Read and follow all the safety instructions:
- The lamp is not waterproof. Avoid exposing it to splashing or dripping water.
- The operating temperature should be within -10° to 45°C (14° to 113°F).
- The lamp’s internal light source cannot be replaced. If it breaks, you must replace the entire lamp.
- Do not allow children to install the lamp alone.
- The lamp can only be charged with the provided Type-C cable and does not support other charging cables. Do not attempt to use the provided Type-C cable to charge other devices.
- Do not install the lamp with a dimming driver.
- Avoid installing the lamp near heat sources.
- Avoid installing the lamp near potentially dangerous sources (e.g., candles, liquid-filled objects).
Introduction
Thanks for choosing the Govee Aura. This Table lamp emits warm, vibrant colors to help you sleep peacefully or awake gently. It is also equipped with incredible lighting effects. With smart voice control, you can light up your life hands-free.
What You Get
- Table Lamp: 1
- Control Box: 1
- Adapter: 1
- User Manual: 1
- Service Card: 1
At a Glance
- Music mode
- Brightness +
- Brightness –
- Switch Button
- On/Off Button : Press to power the lamp On/Off
- Brightness+: Press to increase the brightness
- Brightness-: Press to decrease the brightness
- Music Mode: Press to cycle through four music modes.
- Switch Button: Press to change light colors.
Long press to change color modes.
Installing Your Device
-
Connect the adapter to the control box with the DC charging port.
-
Insert the other end of the cable into the Type-C charging port.
-
Power on the adapter.
Pairing Your Device with the Govee Home App
What you need:
-
A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
-
A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).
-
Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
-
Open the app, tap the “+” icon in the top right corner and search for “H6052”.
-
Tap the device icon and follow the onscreen instructions to complete pairing.
-
Specifications
- Working Voltage AC 100-240V
- Input 12V/1A
- Lumen 350Im
- Color RGBICWW
- Color Temperature 2200K-6500K
- Working Temperature -10° to 45°C (14° to 113°F)
Troubleshooting
- Cannot connect to the Govee Home app.
- Check if the device is powered on.
- Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
- When connecting for the first time, ensure the smartphone is near the device.
- If the connection error still exists, please delete the connected device from “My Devices” on the app. Reconnect to the Govee Home app by following the instructions provided previously.
- Wi-Fi disconnected or failed to connect?
- Check if the device is powered on.
- Do not skip the Wi-Fi connection steps during the device pairing process.
- Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
- Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
- Try using another smartphone to pair with the device to ensure your network is working properly.
- Shorten the distance between the device and the Wi-Fi router to less than 50ft, then reconnect.
- Cannot connect to Alexa or Google Assistant.
- Ensure the Wi-Fi connection is stable and working properly.
- Go to “User Guide” on the app Settings page to pair the device again.
- Can multiple users control one device?
- Each device can only be controlled by one account.
- If multiple users want to manage the same device, ensure they all use the same account.
Warranty
12-Month Limited Warranty
Customer Service
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com