TOKK Cam F3 Rechargeable Battery-Operated Wire-Free Camera User Manual
- June 10, 2024
- Tokk
Table of Contents
**TOKK Cam F3 Rechargeable Battery-Operated Wire-Free Camera User Manual
**
Product Description
How to factory reset: When the camera is turned on, press and hold the reset button for about 3 seconds until you hear the “reset complete, will restart the device ” .
Device Description
- This device has two modes: AP mode and Wi Fi mode
- Built-in battery.
- Support DC5V/2A power supply.
Indicator Status
Yellow light: always bright during charging, goes off when fully charged. Blue light: slow flash—waiting for Wi-Fi connection, fast flash during Wi-Fi connection, always bright Wi-Fi connection success. Factory reset: the blue light and green light flash alternately slowly. Low battery alarm: the blue light and green light flash rapidly at the same time.
Step 1: Pre-Setup
Long press the Power Switch button 3 seconds to turn on
Long press the reset button 3 seconds to factory reset.
It’s recommended to place the camera within 2 meters of the router for the
first time connecting to the Internet.
Connect the mobile phone to the router Wi-Fi, and know the Wi-Fi connection
password. (Only 2.4GHz Wi-Fi is supported) (How to power off: Long press the
power button for 3 seconds to power off)
Step 2:APP Download and Registration
-
Search for “Fowl” in App Store or Google Play. or scan the QR code to ao wnload the app.
-
© Click” Register” .enter the user name and password to complete the registration.
Step 3: Add Devices to the APP Method One: Scan OR code to add camera
-
Click Add Device and choose “Scan OR Code to odd camera”.
-
Turn on the camera.
-
@Long press the RESET button for 3 seconds to restore the camera to factory settings.
-
Confirm the WiFi to be connected and enter the correct password.(The device does not support 5G Hz networks)
-
Scan the OR code generated by the App with the camera lens until the camera makes a beep.
-
After the camera is successfully connected to the Internet, click “Bind now”.
Method Two: AP Connection
-
Please go to your mobile phone WiFi Settings . play . that start with OK-XXX and connect it.
-
Open the app and Click to watch and operate select the WiFi hotspot the camerc.
Configure Wi Fi
-
Enter camera parameters
-
Select WiFi settings. WiFi and enter the WiFi password correctly.
-
Select your home
Dedicated PC Video Player
Downlmi 4edicuted video player for pluying Micro SD curd video: For Win: https://www.cookycom.cn/downlond/ Videonlyer.exe For Mac: httus://www.cookycam.cn/downlood/ VideoPlcwer-Mac..dmg If tany questions. please feel free to contcct our customer service. Thank you!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>