TOKK PL7001 Fingerprint Padlock Instruction Manual

TOKK PL7001 Fingerprint Padlock Instruction Manual

Contents

Part Name

Specifications

Features

Battery Life
After each full charge, the PL7001 Fingerprint Padlock can be operated up to 1,500 times. Without any operation (Idle mode), PL7001 can standby over 130 days.

Low Battery Indicator
When batteries voltage ≤ 3.7V, each time it is successfully unlocked, the LED status indicator will light up in Green for 1 sec and flash in Red 4 times.
PL7001 Fingerprint Padlock can still operate up to 100 cycles in low battery condition. When batteries voltage ≤ 3.5V, PL7001 Fingerprint Padlock cannot be operated.

Emergency Unlock
4-digit resettable combination for emergency unlock.

Fully charging your battery before use.

Operation Instructions

Set Up The First Administrator’s Fingerprint

1. Unlock PL7001
2. Press and hold the sensor for 3 seconds Once the LED flashes Red and Green, lift your finger
3. Repeat collecting the same fingerprint for 5 times
   • Successful fingerprint collection: LED flashes Blue
   • Failed fingerprint collection: LED flashes Red
4. When the fingerprint was stored, the LED lights up Green
5. The LED will keep flashing Red and Green for adding the second to tenth fingerprints. Without any setting, it will exit the Setting Mode after 10 seconds

Set Up The 2nd to 10th Fingerprints

• The Administrator unlock PL7001
• The Administrator press and hold the sensor for  seconds Once the LED flashes Red and Green, lift your Green, lift your
• Repeat collecting the same fingerprint for 5 times
  • Successful fingerprint collection: LED flashes Blue
  • Failed fingerprint collection: LED flashes Red
• When the fingerprint was stored, the LED lights up Green
• The LED will keep flashing Red and Green for adding other fingerprints. Without any setting, it will exit the Setting Mode after 10 seconds

Remarks:

1. The first and second fingerprints are the administrators by default.
2. One of the administrators fingerprint will be need to authorize when adding fingerprints.

Delete All Fingerprints

1. Unlock PL7001
2. Press and hold the sensor for 3 seconds, the LED will flash Red and Green Keep holding until the LED flashes Blue, lift your finger
3. Press and hold the sensor, the LED will light up Red All fingerprints are deleted

Remarks:
Only the administrators can delete the fingerprints, all the fingerprints will be deleted at one time.

Setting Your Own Combination

1. Turn the Reset Button 90˚ clockwise
2. Scramble the Dials to set your own combination
3. Turn the Reset Button 90˚ counterclockwise back to its original position

Your lock is now ready to open at its new combination

Emergency Unlock

1. Scramble the Dials to the combination you’ve set
2. Press the release button to unlock

Audio and LED Indications

Setting Mode

Flash

Green and Red

| ****

1 Short beep

Successful fingerprint collection| Lighting Blue for 0.5 sec| ****

1 Short beep

Failed fingerprint collection| Flash Red 3 times| ****

3 Short beeps

Fingerprint stored successfully| Lighting Green for 1 sec| ****

1 Long beep

Without any settings, it will exit the Setting

Mode after 10 seconds

| ****

Green and Red LED off

| ****

–

Reset Mode

Flash

Green and Red

| ****

1 Short beep

The administrator keeps holding until the LED lights Blue to enter Reset Mode, life the finger| ****

Flash Blue

| ****

1 Short beep

The administrator press and hold the sensor to erase all settings

| ****

Lighting Red

| ****

1 Long beep

Exit Reset Mode

| ****

Red LED off

| ****

–

Unlock

Successfully unlocked by fingerprint

| ****

Lighting Green for 1 sec

| ****

1 Long beep

Failed to unlock by fingerprint

| ****

Flash Red 2 times

| ****

2 Short beeps

Recharging

Recharging

| ****

Continuous Lighting Red

| ****

–

Complete charging

| ****

Continuous Lighting Green

| ****

–

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>