CHAMBERLAIN RTXW2 2 Channel Transmitter Instructions
- June 6, 2024
- CHAMBERLAIN
Table of Contents
CHAMBERLAIN RTXW2 2 Channel Transmitter
IMPORTANT SAFETY RULES
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER
Caution! Non-compliance can result in serious injury.
Do not allow children to play with the controls.
Any work on the electrical installation including servicing may only be
performed by a qualified electrician.
Check shutter or sun-blind system regularly for signs of wear and damage.
Damaged systems should not be used under any circumstances until such time as
they have been repaired.
Observe shutter or sun-blind system carefully whilst in operation..
Only those spare parts, tools and other equipment as have been approved by
Chamberlain may be used.
Fit control facilities within sight of the product to be controlled at a
height of at least 1.5 m.
CORRECT USE
The remote controls in this product are only suitable for use in conjunction with shutter drives made by Chamberlain (ER-Series). Should your existing remote control have a different design, it is not compatible with these devices! To ensure that these remote controls function properly, a radiocontrolled shutter drive (ER-Series) made by Chamberlain or a universal receiver (Models: RRX1) is required.
Any other form of usage is deemed to be incorrect. Neither the manufacturer
nor the supplier assumes any liability for personal injury, damage to property
or consequential injury or damage occurring as a result of the use of the
control units and / or drives for purposes other than those mentioned above or
due to changes made to the equipment affecting the safety of the given system.
The details stipulated in the Operating Instructions in respect of the
operation and repair of the system require strict observance. Neither the
manufacturer nor the supplier assumes any liability for personal injury,
damage to property or consequential injury or damage occurring as a result of
non-compliant actions.
PROGRAMMING REMOTE CONTROL
The remote control is compatible with:
Chamberlain tubular motor: RPD10ER, RPD15ER, RPD25ER, RPD40ER
Chamberlain receiver: RRX1
Press the learn button on the master remote control (1) or on an already learned remote control 8 times (motor beep) and then press the learn button on the new remote control (2) RTXW1 or (3) RTXW2. The new remote control has been successfully taught. The motor confirms this with a short jerk in each direction.
For programming a master remote control / on receiver model RRX1 see corresponding instructions!
TECHNICAL DATA
| Battery type / QTY | CR2430 / 1 |
|---|---|
| Power supply | 3V DC |
| max. remote power | ≤ 10mW |
| Frequency | 433,92 MHz |
| System | Rolling code |
| Degree of protection | IP30 |
| Temperature | -10°C – +50°C |
DISPOSAL
The packaging must be disposed of in the local recyclable containers. According to the European Directive 2002/96/EC on waste electrical equipment, this device must be properly disposed of, after usage in order to ensure a recycling of the materials used. Old accumulators and batteries may not be disposed of in the household waste, since they contain pollutants and must be properly disposed of in municipal collection points or in the containers of the dealer provided. Country-specific regulations must be observed.
EU DECLARATION OF CONFORMITY
Hereby, Chamberlain GmbH declares that the radio equipment type RTXW1/W2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://chamberlain.de/Chamberlain/media/Chamberlain/CE/114ADoC- RTX-D-2020.pdf
Chamberlain GmbH Saar-Lor-Lux-Str. 19 66115 Saarbrücken, Germany Tel. 0049 681
870 80 100 WEEE-Reg.Nr. DE66256568
www.chamberlain.eu
[email protected]
