NOVA LIFE ROBERTO Floor Lamp Instruction Manual
- October 27, 2023
- NOVA LIFE
Table of Contents
NOVA LIFE ROBERTO Floor Lamp
CAUTION:
Warning:
- Only use bulbs as directed on the label on the lamp.
- Turn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care to touch the lamp when the lamp is lit. It can be hot.
Pre-Installation
PLANNING THE INSTALLATION
Removal of a previous fixture, disconnect the power by turning off the
circuit breaker or by removing the fuse at the fuse box. To avoid damaging
this product, assemble it on a soft, non-abrasive surface such as carpet or
cardboard.
Installation
Operation
- Turn on the power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
Package contents (parts are not to scale)
Light source
230V E27 1 x 40W Max (not include) Recommend LED bulb
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only dry soft cloth to dust or wipe carefully.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>