CALIFONE PA419 Wireless Portable PA System User Manual
- June 6, 2024
- CALIFONE
Table of Contents
PA419
Wireless PoCrtable PA System
User Manual
Thank you for purchasing the Califon&’ PA419 Wireless Portable PA System.
We encourage you to visit our website
www.califone.com to register your product for its
warranty coverage, to sign up to receive our newsletter, download our catalog,
and learn more about the complete line of Califon& audiovisual products,
including portable and installed wireless PA systems, multimedia players and
recorders, headphones and headsets, computer peripheral equipment, visual
presentation products, and language learning materials.
” Made for iPod “, ” Made for iPhone “, mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPhone may affect wireless performance.
IMPORTANT SAFETY INSTRUCTIONS
Before using this product, read the instruction manual for important safety
information. Please retain this manual for future reference and warranty
information.
Troubleshooting & Servicing
Do not attempt to service or repair the device yourself. Refer all servicing
to qualified service personnel. Do not attempt to modify the device in any
way. Doing so could invalidate your warranty.
Moisture and heat sources
Do not use this apparatus near water (for example, sinks, baths, pools) or
expose it to rain, moisture, dripping, or splashing liquids. Do not expose the
unit to high temperatures, high humidity, or direct sunlight.
Cleaning
When cleaning the device, please use a soft, dry cloth. Never use benzene,
paint thinner, or other chemicals on the device.
Location
Place the device in a stable location, so it will not fall causing damage
to the device or bodily harm.
Intended use
The product may only be used with the original parts intended for it. The
product may only be used in closed and dry rooms. The intended use includes
adherence to the specified installation instructions. The manufacturer accepts
no liability for damage arising due to improper use.
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
IMPORTANT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
The unit’s circuitry may cause interference to nearby radios. To prevent
interference, either switch the unit off or move away from the affected radio.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
NOTE: Shielded cables may be required to be used with this unit to ensure
compliance with the Class B FCC limits.
SAFETY CERTIFICATION
This Compact Disc Player is made and tested to meet safety standards of the
FCC, requirements, and compliance with the safety performance of the U.S.
Department of Health and Human Services, and also with FDA Radiation
Performance Standards 21 CFR Subchapter J.
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID
DIRECT EXPOSURE TO LASER BEAM.
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism, designed
with built-in safeguards. Do not attempt to disassemble; refer to qualified
service personnel. Exposure to this invisible laser light beam may be harmful
to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUSTMENTS, OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULTING IN HAZARDOUS LASER
LIGHT BEAM EXPOSURE.
PACKAGE CONTENTS
The following materials are included.
- PA419 Wireless Portable PA Speaker
- Power Adapter
- AC Power Cord
- Remote Control
- User Manual
Unpacking the Unit
Inspect the unit once the packaging has been opened for any damage that
occurred during shipping and contacts us immediately. Please keep the packing
material for further use.
PART NAMES AND FUNCTIONS
1. Handle
2. Tripod
3. DVD/CD/Media Player
4. Control Panel| 5. UHF Receiver Module
6. Battery Compartment
7. iPod Dock
---|---
UHF Receiver
- Channel Selector
- Audio Signal LED Indicator
- RF LED Indicator
- Power LED Indicator
- Power Switch & Volume Control
DVD/CD/Media Player
1. Disc Slot
2. Stop
3. Back
4. Forward
5. Play/Pause
6. Eject
7. Disc Select| 8. USB Select
9. File Forward
10. File Back
11. Remote Infrared Sensor
12. LCD Display
13. USB Port
---|---
Control Panel
1. Music/Speech Button
2. Microphone Volume
3. Auxillary Volume
4. MP3 / Disc Volume
5. Echo Control
6. Tone Control
7. Master Volume Control
8. Microphone Input Jack
9. Auxillary Input Jack, L & R| 10. Audio Line Out, L & R
11. iPod Video Out
12. DVD Video Out Jack
13. Voice Priority Switch
14. Power Switch
15. Power LED Indicator
16. Battery LED Indicator
17. DC Power Input Jack
---|---
Remote Control
NOTES:
- USB / DISC = Switch between USB and DVD/CD Playback.
- PT+ = Pitch Up
- PT- = Pitch Down
- OSD = On Screen Display
- Top section of remote controls DVD/CD/USB Player.
- Bottom section of remote controls iPod / iPhone.
KEY FUNCTIONS
Note: Some of the following buttons are on the remote control, and some
are only on the main unit. The button may function differently on the main
unit or remote control. Many of these functions are only applicable when the
PA419 is connected to a display screen.
POWER ON/OFF
Press this to turn the PA419 on and off.
EJECT
Removes the CD or DVD from the PA419 disc slot.
SUBTITLE
Press this key to switch between any available subtitles on the DVD when
connected to a display screen.
SETUP
Press this key to setup the system when connected to a display screen.
MENU
Press this key to return to the DVD menu when connected to a display screen.
PLAY/PAUSE
Press this key to begin playback or to resume normal playback from pause, fast
forward, or fast reverse states. Press this key again to pause playback, and
then press this key to resume normal playback.
ZOOM
Press this key to zoom. Six different levels of zoom are available.
REPEAT
Press this key to change the repeat mode.
PROGRAM
Press this key to program-specific song/chapters to play when connected to a
display screen. For track numbers above 10, press 10+ and then the additional
digit. For instance, for track number 15, press 10+ then 5. For track number
37, press 10+ three times, then press 7. Note that inputted track numbers may
not exceed the number of tracks available. Up to twenty tracks may be
programmed.
OSD
Press to display track information when connected to a display screen.
FAST REVERSE
Press this key for a fast backward search. You can select the speed of 2X, 4X,
8X, 20X.
FAST FORWARD
Press this key for fast forward search. You can select the speed of 2X, 4X,
8X, 20X.
SKIP BACKWARD
Press this key to skip to the previous chapter or song.
SKIP FORWARD
Press this key to skip to the next chapter or next song.
MUTE
Press this key to mute the audio. Press again to unmute the audio.
PITCH ADJUSTMENT
Press the Pitch + or Pitch – on the remote control to adjust the pitch
setting.
SETUP AND INSTALLATION
5.1 AC Operation
- Turn all of the volume controls to their minimum setting.
- Insert the DC plug, at the end of the AC adapter cord into the DC input jack.
- Plug the AC adapter into the AC power outlet socket. Use only with the included power adapter and make sure the local voltage corresponds to the adapter’s required AC input voltage.
- Turn on the power switch.
NOTE: If the AC plug of this unit does not fit in your AC outlet, a plug
adapter (not supplied) should be used.
5.2 Battery Operation
- To enable battery operation, first ensure that the internal battery is fully charged. To do this, follow the instructions above for AC Operation and let the battery recharge for at least 7 hours.
- When the battery is charging, the CHG LED will light red. It will turn green when the battery is fully charged.
BASIC OPERATION
6.1 Remote Control
Before the first use, open the battery cover, located on the back of the
remote control. Remove the protective plastic film. The remote is now ready
for use.
- The remote control may be used to operate the PA419 within 13 feet (4 meters) from the front or rear of the speaker, within a 45-degree angle.
• The remote control battery should last for about a year. When the remote ceases to work, it may be time to change the battery. Open the remote control battery cover and replace the old battery with a new CR2025.
6.2 Control Panel
Microphone Input (MIC IN)
Connect a microphone to the microphone input jack. The Microphone Volume is
used to control the level of the input signal.
Music/Speech
Press this button to change the microphone input setting. When the button is
up, it is set to speak and should be used when a microphone is connected to
the input. When connecting a sound source (such as an external media player,
the button should be set in the down position to enable full-bandwidth music
playback.
Line In (AUX IN)
Connect to the aux input jacks using RCA or 3.5mm plugs. The Aux Volume is
used to control the level of the input signal.
Line Out (LINE OUT, VIDEO OUT)
RCA jacks are used to connect to the input of another piece of equipment such
as a stereo, mixer, or another amplified speaker.
The line outputs are independent of the Master Volume control.
Voice Priority
This feature is used for voice override of the music program when using any
microphone. The “ducking” circuit attenuates the music when a person speaks
into the microphone. After a 3 second delay in the speech, the music returns
to the previous level.
Note: This function does not affect the iPod/iPhone audio output.
6.3 DVD/CD/Media Player
NOTE: When turned fully counter-clockwise until it clicks, the MP3 / Disc
Volume control also turns off the power to the DVD/CD/Media Player. To turn
the power on, turn the knob above the minimum setting.
CD Player
- Insert a standard CD into the slot. When the CD player is on without a disc inside, the LCD display will show “LOAD.” Once a CD is inserted into the slot, the LCD display will show “READING DISC.”
- Press the Play button to start playing the audio track. Press it again to pause playing. Press Stop to stop playing; it will resume play at the place it has been stopped. Press Stop again to revert to the beginning of the CD.
- Press the Eject button to remove the CD from the slot. If the CD is not removed, the CD will be pulled in automatically after 30 seconds.
- Press the Fast Forward and Fast Reverse buttons to choose the desired track. To fast forward or rewind through a song, press these buttons continuously and press Stop at the desired point.
- To set the Audio, connect the PA419 to a display screen and press the Audio button on the remote control. The audio may be set to Mono left, right, mix mono, or stereo.
DVD Player
- Connect the Video Output (RCA) to the Video input of the TV or monitor.
- Power on both units. Insert a standard DVD into the PA419 slot.
- Once the DVD is read, the menu screen will appear on the display screen.
- Press the Play button to start the DVD, or navigate through the menu screen using the arrow buttons.
- If desired, for additional volume, connect the Audio Outputs using RCA cables to the audio input of the TV or additional PA / sound
system.
Setup
When pressing the SETUP button on the remote control, a menu appears on the
TV screen: System Setup, Language Setup, Audio Setup, and Video Setup.
- SYSTEM SETUP: The System Setup screen allows the TV System (NTSC/PAL), Screen Saver, Video (S-Video), TV Type (screen ratio), Password, and Rating Level to be set. Also, this menu allows resetting the DVD Player to factory default settings.
- LANGUAGE SETUP: The Language Setup screen allows the OSD Language to be customized.
- AUDIO SETUP: The Audio Setup screen allows the EQ and Stereo/Mono setting to be customized.
- VIDEO SETUP: The Video Setup screen allows customization of the Sharpness, Brightness, Contrast, Hue, and Saturation.
- To exit the Setup menu, press the SETUP button again.
USB Media Player
- Connect the PA419 Video Output to a display screen.
- Place the USB key into the USB slot. Press the USB / DISC button on the remote control or front panel to enter USB mode.
- Press the Program button on the remote control to view all files.
- Scroll through the different media types and then using the arrow buttons, scroll through the different files and press the Enter button to select a file.
- Press File Forward to navigate to the next file, and then use Skip Forward to select the track to play.
6.4 iPod/iPhone Dock
- Connect the iPod/iPhone to the dock located on the top of the PA419.
- Operate the iPod/iPhone using the buttons on the bottom section of the remote control or the dock to play audio or video files.
- Adjust the volume using the Vol+/- buttons on the remote control or the buttons on the iPod/iPhone dock.
6.5 UHF Receiver
- Set the PA419 UHF Receiver to the same frequency as the transmitting microphone by turning the UHF Receiver knob to the desired frequency.
- The Power LED will light up red when the UHF Receiver is turned on.
- When a transmitter is connected, the RF A/B LED will light green.
- The AF LED will turn green when sound is being transmitted through the microphone to the PA419.
- Slowly increase the volume to the desired level. Note that the master volume of the PA419 may also need to be adjusted.
TROUBLESHOOTING
Issue
|
Resolution
---|---
No Sound.| Check that the master volume is turned up as well as the volume
control for the appropriate input and/or device.
The DVD/CD/Media Player does not power on.| On the Control Panel, rotate the
Master volume knob clockwise.
The volume will not change.| Check each control knob and turn to the desired
position.
The unit does not power on.| The unit may not be charged. Plug the power
supply in.
SPECIFICATIONS & FEATURES
General
Functions| Amplifier, iPod Dock, DVD/CD/Media Player, 2 16-channel UHF
receivers, XLR/1/4″ Mic Input, RCAAux Input, 3.5mm Aux Input, RCA Line Output,
Composite RCA Video Outputs for iPod and DVD Player, Standard 1-3/8″ tripod
mounting hole on the bottom
---|---
File/Disc Compatibility| CD, CD-R, CD-RW, DVD, DVD-R, DVD-RW, CD+G, AVI,
MPEG1, MPEG2, MPEG4, MP3, JPEG
Remote Control Battery| CR2025
Product Dimensions| 8.75 (w) x 8.75 (I) x 12.75 (h) inches (22.2 (w) x 22.2
(I) x 32.4 (h) centimeters)
Product Weight (incl. accessories)| 14.6 lbs (6.6 kg)
Main System
Power Adapter | 100-240V-50-60Hz switching-type with DC 18V/3.33A output |
---|---|
Working Voltage | 12-18 V (DC) |
Max Working Current | 5A |
Battery Recharge Time | < 10 hours |
Battery Usage Time | > 2 hours (Max Power) **Note: Usage time will depend on |
program material and battery age. If playing “loud” types of music (pop/rock) at
maximum volume, usage time may be less (e.g. 1.5 hours).
Sensitivity (MIC)| 7.4 mV
Sensitivity (AUX)| 190 mV
Power Output| 30 W (RMS)
Speaker| 6.5 inch, 4 ohm, full-range
Battery Capacity| 6 AH
Receiver
Receiver Frequency | 902-928 MHz |
---|---|
Channels | 16 |
Receiver Sensitivity | -95 dBm |
Receiver Type | FM |
made for:
iPod|
- iPod touch(1st, 2nd, 3rd and 4th generation )
|
iPhone
|
- iPhone 4
---|---|---|---
-
iPod classic
-
iPod with video
|
-
iPhone 3GS
-
iPod nano( 1st, 2nd, 3rd, 4th, 5th and 6th generation )
-
iPod with color display
|
-
iPhone 3G
-
iPod mini
-
iPod with dock connector
|
-
iPhone
-
iPod with Click Wheel
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S and otherCountries.
WARRANTY
Califone warrants this product to be free from defective material and
workmanship for one year from the purchase date. Our “Project Intercept”
Customer Satisfaction program will replace defective parts and repair
malfunctioning equipment under this warranty when the defect occurs under
normal use.
All Damage Claims Must Be Made With the Freight Carrier
Notify the freight carrier immediately if you observe any damage to the
shipping carton or product. Repack the unit in the carton and await inspection
by the carrier’s claim agent. Notify your dealer of the pending freight claim.
Returning Your Unit for Service or Repairs
Should your unit require service, contact our Customer Service
Department online at
califone.com/techsupport or via email
warranty@califone.com or by phone at
800-722-0500 /
818-407-2400 to first obtain an RA
(Return Authorization) number before returning it to Califone. The unit must
be returned to our factory via prepaid transportation only after the factory
issues an RA number, which must be clearly written on the outside of the box.
Califone® International, Inc.
1145 Arroyo Avenue, #A
San Fernando, CA 91340 USA
Toll Free 800.722.0500
Toll Free Fax 877.402.2248
International Customers call 818.407.2400 or Fax 818.407.2405
califone.com
Califone PA419 Rev 01 0511
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>