unitech vMS852B Bluetooth 2D Barcode Scanner User Guide
- June 6, 2024
- unitech
Table of Contents
- unitech MS852B+ Bluetooth 2D Barcode Scanner User Guide
- How to turn on / turn off the scanner
- Charging the Scanner
- How to pair the scanner with the cradle
- Scanner type
- Operation Mode
- Scan Mode
- Aimer Mode
- Mobile Phone Read Mode
- Bluetooth
- System Reset & Info
- Data & Memory
- Auto Power Off After Idle
- Scanner Auto Presentation Mode
- Beeper Control
- Data Sending Inter Block Delay
- HID Keyboard Case
- DataTerminator
- HID Keyboard Language
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
unitech MS852B+ Bluetooth 2D Barcode Scanner User Guide
How to turn on / turn off the scanner
Turn on : Long press the trigger key for 2 seconds until you hear a long beep sound.
Turn off : Long press the trigger key for about 7 seconds until you hear a short beep sound.
Charging the Scanner
Before using the scanner for the first time, please charge the scanner with the cradle.
Red LED light : Being charged
LED light goes off : Fully charged
How to pair the scanner with the cradle
- Firstly, select the interface you want to communicate with your PC, for USB/RS232 cable connection, please switch the interface switch to the left/right side as below figure and then connect the cradle and the PC via the interface cable.
- Long press trigger key for 2 seconds to turn on the scanner. And then put the scanner on the cradle to start the BT pairing automatically.
- When the pairing is completed, both the scanner LED and the cradle LED will show solid blue light.
Scanner type
- These settings are for cradleless mode only when the scanner connects to the host directly not through cradle.
- To switch the different scanner type, please do un-pair first and then select the scanner type and redo Bluetooth connection.
Operation Mode
Scan Mode
Aimer Mode
Mobile Phone Read Mode
Bluetooth
Remark:
If ‘Higher Level RF Signal Checking’ is selected, BLE communication will
become more reliable but the distance will be shorter.
System Reset & Info
Data & Memory
Note: To erase buffer, scan ‘Enter Auto Buffer Erase’ and then scan ‘Erase’. To erase batch file, scan ‘Enter Batch File’ and then scan ‘Erase’.
Auto Power Off After Idle
Scanner Auto Presentation Mode
Beeper Control
Data Sending Inter Block Delay
HID Keyboard Case
DataTerminator
HID Keyboard Language
- : Default Option
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more
information.
Version 1.0
608286G
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>