MAREA B57007 Smartband Smartwatch User Manual
- June 6, 2024
- MAREA
Table of Contents
B57007
User Manual
Please read this manual to fully understand its use and operation.
The company reserves the right to make changes to the contents of this manual
without prior notice.
Component introduction
Press and hold the touch area to turn on
Charging and activation of the bracelet
Before using the bracelet for the first time, it needs to be charged and
activated. Use only the included magnetic charger. The metal part on the back
of the bracelet must touch the other end on the charger
INSTALL BRACELET APP
- Go to our website www.mareasmart.com and find your sm art watch model (B57007).
- Download and instalI on your phone the official app that corresponds with your smart watch model
- Open the app and enable all the permissions that the app requests
- Turn on Bluetooth on your phone
- Make sure that the smart watch has not been linked directly through BIuetooth to your phone. If so, un link it.
- Bind your Marea Smart watch through the app
MAIN FUNCTIONS
Main interface/Dial
Long press the touch area on the main interface to directly Switch dial,
the dial has 5 styles
Steps/distance/calories
Check the number of daily walking steps, walking distance, and calories
consumption at any time of the day. If the bracelet is linked to the app, it
will send the data to the app.
Heart rate
Switch to the heart rate interface to start real-time heart rate detection. If
the bracelet is linked to the app, it will send the data to the app
Blood pressure
Switch to the blood pressure interface to start real-time blood pressure
detection. If the bracelet is linked to the app, it will send the data to the
app.
Note: The test results are for reference only and can not be used as
medical data
Blood oxygen
Switch to the blood oxygen interface to start real-time blood oxygen
detection. If the bracelet is linked to the app, it will send the data to the
app.
Sports
Lon g press the sport mode interface to enter, click to switch sport. Lon g
press to start the measurement. Long press to stop.
Women’s health
Lon g press the women’s health interface to view the cycle status
Breathe
Lon g press the breath interface to enter the breathing training test.
Message
Long press the message interface to view the received messages. Click to go to
the next message. Long press to erase that message
Settings
Long press the settings interface to enter the settings menu, which includes
the following functions:
About
Lon g press to display Bluetooth information: the last four digits of the
address and the version number.
Restore
Long press to restore the bracelet to factory settings
Turn off
Long press to shut down the bracelet.
Find phone
Long press to make the phone vibrate and/or ring.
Brightness
Long press to set the screen brightness
Notifications
The notifications must be set and activated on the APP. The phone and the
bracelet must be linked via Bluetooth so the bracelet can receive n
otifications from the phone.
Sleep monitoring
Wear the bracelet when sleeping to monitor the length of total sleep, and deep
and light sleep state.
CAUTION
- Do not use power adapters with chargin g voltage > 5V and charging current > 2A
- Do not charge if the device is wet.
- This produ ct is an electronic monitorin g product and must not be used as a medical The test results are for reference only.
- Blood pressure test meth od: Rest for more than 5 minutes before the test; do not eat, smoke, take medicin e or drink caffein e for 2 hours before the test;
Durin g the test, keep a comfortable and still sittin g position and speak quietly. Make sure the bracelet is at the same height as the heart (as shown on the ima ge)
F.A.Q
-
Why the blood pressure test is not working?
The blood pressure test is affected by the external environment and personal skin color. Blood pressure monitorin g only measures chan ges in blood pressure.
It cannot test or monitor the blood pressure of patients with hypertension. It cannot be used as a medical device. The test results are for reference only. -
Why does the bracelet not receive notifications?
2.1 Android phone:
When the user turns on the notification s switch for the first time, the App will ask for the correspon ding permissions. Activate all the permissions needed.
2.2 IOS phone:
**** When the user turns on the call or messa ge notifications switch, the system will automatically pop up the pairing request. The user needs to confirm the pairing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>