CONAIR BC514 2-Inch Hot Brush Instruction Manual
- June 6, 2024
- ConAir
Table of Contents
CONAIR BC514 2-Inch Hot Brush
IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
TAKEN, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING APPLIANCE KEEP AWAY FROM WATERDANGER – TO
REDUCE THE RISK OF ELECTRIC SHOCK: ALWAYS UNPLUG THIS APPLIANCE FROM THE
ELECTRICAL OUTLET BEFORE CLEANING.
WARNING
TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR INJURY TO PERSONS:
- Unplug from outlet before putting on or taking off parts.
- This mirror should not be used by or near children or individuals with certain disabilities.
- Use this mirror only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
- Never operate this mirror if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the mirror to a service center for examination and repair.
- Keep the cord away from heated surfaces.
- Never drop or insert an object into any opening.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- To disconnect, turn all controls to the OFF position, then remove plug from outlet.
- Do not leave appliance unattended when it is plugged in.
- Be sure mirror is not in a position where it can reflect sunlight; reflected sunlight can cause fire.
- Do not use on a soft surface such as a bed, where openings may be blocked.
- Turn switch to OFF position, allow unit to cool and unplug cord before replacing light bulbs.
- Do not place or store appliance where it can fall or be pulled into a tub or sink.
- If an appliance falls into water, unplug it immediately. Do not reach into the water.
- To protect against electrical hazards, do not use while bathing or in the shower.
- Never use while sleeping.
- Do not use a bulb greater than 20 watts.
Use on any 120 volt 60 hertz AC electric outlet (ordinary house current). Do not use it on any other electrical outlet.
OPERATING INSTRUCTIONS
This hot brush is intended for household use. Use on Alternating Current (60
hertz) only. This unit is designed to be operated at 120V AC.
This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fi t in a polarized outlet only one way. If the
plug does not fi t fully in the outlet, reverse the plug. If it still does not
fi t, contact a qualifi ed electrician. Do not attempt to defeat this safety
feature.
NOTE: Do not use this styling appliance on hair extensions.
SWITCH ACTIVATION CONTROL
IMPORTANT! This hot brush features delayed activation control to give consistent results and ease of use while styling. Immediately after switching on the hot brush you are able to adjust the temperature. After 5 seconds of the hot brush being turned on, the switches will automatically lock. To adjust any settings, hold down the button of the required setting for 1–2 seconds; this will deactivate the lock mode and allow the settings to be changed. To turn off the hot brush, hold down the ON/OFF button for 1–2 seconds until the unit switches off.
GETTING STARTED
Hair should be clean and completely dry before using the hot brush. Plug the
brush into an electrical outlet. Turn on unit.
WARNING: The hot brush will get very hot within a few seconds and should not
be placed in contact with the skin after the hot brush has been turned on.
The brush’s unique 5 ultra-high heat temperature settings and Instant Heat
technology provide styling versatility for all hair types. If you have fi ne
hair, a low temperature will provide the best results. If you have thick, wavy
or hard-to-curl hair, keep the heat setting on high. You can vary the brush’s
temperature according to your particular need!
Temperature Setting Guide
| LED TEMP. CONTROL | HAIR TYPE |
|---|---|
| Power–Low 300ºF–320ºF | Delicate, thin, easy-to-curl hair |
| Medium 340ºF | Average to thick or treated hair |
| Med-High 355ºF | Thick or wavy hair |
| High/Max 375ºF | Hard-to-curl hair |
GET TO KNOW YOUR HOT BRUSH
TO STYLE HAIR
1. Ensure hair is fully dry before using the hot brush.
2. Start by sectioning the hair.
3. To turn the appliance on, press the ON/OFF button. The LED will display
300°F and start to blink.
4. Use the +/- buttons to select the required temperature setting.
5. Place the hot brush underneath the hair section close to the roots and
gently glide the hot brush down the hair to style.
6. To curl the ends of the hair under, wrap the hair ends around the barrel.
7. Repeat as necessary.
TO AVOID TANGLING, NEVER ROLL THE HAIR AROUND THE HOT BRUSH MORE THAN TWO
TIMES.
NOTE: There will be a slight buzzing sound from the hot brush which is from
the ionic generator releasing the ions. This is normal.
STYLING TIPS
• For a flicked-out style, place the hot brush on the top of the hair section
and glide down the hair, wrapping the hair ends around the barrel in an upward
direction.
• For added root volume, place the hot brush under the hair section close to
the roots.
• Hold the hot brush in place for a few seconds.
• Remove the brush from the hair.
• Continue around the hair section and repeat as required.
• During use, do not place this appliance on any heat-sensitive surface. After
use, switch off and unplug the appliance. Continue to keep it out of the reach
of children as it will remain hot for several minutes
IMPORTANT
This appliance has an automatic shut-off feature for added safety. If the
appliance is switched on for more than 60 minutes continuously, then it will
automatically switch off.
If you wish to continue using the hot brush after this time, simply press the
ON/OFF button until the LED displays 300°F and starts to blink, then use the
+/- buttons to select the heat setting you require. This will turn on the hot
brush and you can continue to style your hair
USER MAINTENANCE
Your hot brush is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent.
Never wrap the cord tightly around the appliance. Damage will occur at the
high flex point of entry into the appliance, causing it to rupture and short
circuit. Inspect the cord frequently for damage. Stop use immediately if
damage is visible or if unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow appliance to cool,
then simply store out of reach of children in a safe, dry location. Do not
jerk or strain cord at plug connections. Do not wrap the line cord around the
appliance. Allow the cord to hang or lie loose and straight at the point of
entry into the appliance.
WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous combination. But did
you know that an electric appliance is still electrically live even if the
switch is off? If the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES
LIMITED TWO-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your unit free of charge for 24
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the
service center listed, together with your purchase receipt and $7.50 for
postage and handling. California residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping instructions. In the absence of a
purchase receipt, the warranty period shall be 24 months from the date of
manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE
LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS WRITTEN, LIMITED
WARRANTY. Some states do not allow limitations on how long an implied warranty
lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER.
Some states do not allow the exclusion or limitation of special, incidental,
or consequential damages, so the above limitation may not apply to you.
This warranty gives you specifi c legal rights, and you may also have other
rights, which vary from state to state.
BEAUTY TIPS:
To achieve the looks you love and for more great Infi nitiPRO by Conair®
products, visit: infi niti.conair.com
Please register this product at:
www.conair.com/registration
Service Center
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2016 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
For information on any Conair or InfinitiPRO by Conair product, call
1-800-3-CONAIR or visit us at:
www.conair.com/infiniti
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>