CONAIR CS89CS Tourmaline Ceramic Flat Iron User Guide

June 6, 2024
ConAir

CONAIR logo

1in. tourmaline ceramic flat iron

CONAIR CS89CS Tourmaline Ceramic Flat Iron

1 Styling Brand

For your safety and continued enjoyment of this product, always read
the instruction book carefully before using.
Instruction & Styling Guide
Model CS89CS

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER DANGER –
Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

  1. Always unplug the appliance immediately after using.
  2. Do not use it while bathing or in a shower.
  3. Do not place or store appliances where it can fall or be pulled into a tub or sink.
  4. Do not place in, or drop into water or other liquids.
  5. Never operate this appliance if it has a damaged cord or plug, if it Is not working properly or if it has been dropped or damaged, or dropped Into water. Return the appliance to an authorized service center for examination and repair.
  6. Keep the cord away from heated surfaces.
  7. Never use while sleeping.
  8. Never drop or insert any object into any opening or hose.
  9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
  10. The unit is hot when in use. Do not let heated surfaces touch eyes or skin.
  11. Do not place the heated unit directly on any surface while tt Is hot or plugged In.
  12. Never block the air openings of the appliance or place on a soft surface such as a be or couch. where the air openings may be blocked. Keep the air openings free of lint and other debris.
  13. Do not use an extension cord with this appliance.
  14. Do not touch hot surfaces of the appliance. Use handles or knobs.
  15. Before plugging in. read the information about dual voltage contained in me instruction section of this manual.
  16. Do not attempt to touch the housing of your appliance near the straightening plates. as it is hot when in use.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This flat iron is intended for household use. This unit is designed to operate at 120/240 volts AC. Use on Alternating Current  (50/60 hertz) only.
This appliance has a polarized plug (one blade Is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
DUAL VOLTAGE
This flat iron will automatically adjust to the proper voltage. Use an adapter plug with the correct configuration prior to use in the outlet.
STRAIGHTENING BASICS
Plug the flat iron cord into any household outlet (120/240V). Press ON/OFF button. Red light win blink until it reaches desired temperature setting and then becomes solid. To turn off, press ON/ OFF button again until the red light goes out. Never leave your flat iron on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 60 minutes when on 60 Hz and 72 minutes when on 50 Hz.

WARNING: The flat Iron’s tourmaline ceramic-coated plates will get very hot within a few sec­ onds and should not be placed In contact with the skin after the flat Iron has been turned on.
Start with a hair section that is 2 inches (5 cm) wide and no more than 1/2 inch (1.25 cm) thick. Open the iron and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the iron down along the hair section toward the end. At the end of hair section, release the pressure on the handle and allow the hair to slide out. Repeat the process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeat the process on certain areas, depending on the texture of your hair.
Some experience is necessary when learning to use this flat iron. After using the iron several times, you will learn the Ideal way to straighten and style your hair easily. The flat iron’s ceramic-coated plates are infused with tourmaline, a precious gemstone that when heated emits natural ions, which help the hair cuticle to lie flat, giving it shine and anti-frizz protection.
NOTE: Please refer to the temperature setting guide for heat settings.

STYLING WITH THE NEW EASY-GLIDE FLOATING TOURMALINE CERAMIC-COATED PLATE
The plate of your new fl at iron is designed with a little give, to “fl oat” in your iron. This provides better contact with hair,  eliminating gaps, for straighter results. The easy-glide tourmaline ceramic surface is one of the latest – and best –  technological advances in hair appliances. The tourmaline ceramic even heat distribution produces the ultimate in healthy, shiny,  silky looking hair. You’ll fi nd that hair glides easily over the surface of the plates as you’re straightening and that it is easier to clean styling products residue, etc. off the plates after each use. The tourmaline ceramic surface also helps smooth down flyaways and frizzies. As you smooth your hair, heat is evenly distributed so that the style you create has a salon-perfect, silky smooth, shiny finish. Hair also glides right through the plates after it’s straightened. And that’s not all. Conair’s professional salon standards of engineering provide you with a Uniform Heat Recovery System to maintain the fl at iron at a constant temperature. A constant surge of power ensures that heat is continuously delivered for optimal styling results, unlike other units, which lose heat during use. It provides consistent styling power so that every strand of hair is set with the same level of heat for uniform results and a perfect fi nish. Tourmaline ceramic technology is a pleasure to work with, makes styling your hair easier, and provides professional results.
USING INSTANT HEAT, THE 30 VARIABLE TEMPERATURE SETTINGS AND UNIFORM HEAT RECOVERY SYSTEM
The 410˚F high heat uniform heat recovery system` provides fast, professional salon styling results at home. This flat iron features Conair’s Instant Heat technology. It quickly heats up to the temperature you’ve selected for your hair type and is then ready to use.
Within this Instant Heat technology, there are 30 temperature settings for every type of hair, from the fi nest to the curliest and most resistant.

TEMPERATURE SETTING GUIDE

TEMP. CONTROL HAIR TYPE
Low 1-8 Delicate, thin, easy-to-straighten hair
Medium 9-14 Average to thick or treated hair
Med-High 15-20 Thick or wavy hair
High 21-25 Hard-to-straighten hair
Max 26-30 Coarse, hard-to-straighten hair

URNS CURLS INTO SMOOTH HAIR IN SECONDS

GET TO KNOW YOUR TOURMALINE CERAMIC FLAT IRON

CONAIR CS89CS Tourmaline Ceramic Flat Iron- TO KNOW YOUR
TOURMALINE

USER MAINTENANCE

Your fl at iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool and wipe the exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only.
No repairs should be attempted by the consumer.
CAUTION
NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance.  Damage will occur at the high fl ex point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if the damage is visible or if the unit stops or operates intermittently.
STORAGE
When not in use, your appliance is easy to store. Allow the appliance to cool, then store in a safe, dry location, out of reach of children. Do not jerk or strain the cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into the appliance.

WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF , YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES

LIMITED TWO-YEAR WARRANTY
Conair will repair or replace, at our option, your appliance free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed on back, together with your sales slip and $7.50 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a receipt, the warranty period shall be 24 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you. This warranty gives you specifi c legal rights, and you may also have other rights, which vary from state to state.

Please register this product at: www.conair.com/registration
SERVICE CENTER
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
For information on any Conair product, call 1-800-3-CONAIR or visit us on the web at: www.conair.com
©2013 Conair Corporation
150 Milford Road, East Windsor, NJ 08520
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
12PA135925
IB-11732

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals