MikroTik RBcAPGi-5acD2nD Router and Wireless Instructions

MikroTik RBcAPGi-5acD2nD Router and Wireless

PART LIST

Wall: version 1

1. Drill two 4.5-5mm holes for anchors [1]. Insert plastic anchors into the holes [2]. Attach the mount [3] and secure the mount with screws [4].
2. Connect ethernet cable with product, then attach product to the mount.
3. When the product is attached on the mount, pull it down until it snaps into place.

Wall: version 2

1. Drill two 4.5-5mm holes for anchors [1]. Insert plastic anchors into the holes [2]. Attach the mount [3] and secure the mount with screws [4].
2. Connect ethernet cable [1] with product, then attach product to the mount.
3. When the product is attached on the mount, pull it down until it snaps into place.

Ceiling

1. Drill two 4.5-5mm holes for anchors [1] and 8mm hole for ethernet cable [2]. Attach sheet metal plate in other side of ceilling panel [3], and with screws [5] tighten together with mount part [4].
2. Insert ethernet cable [1] through sheet metal loop and drill hole. Connect cable with product [2]. Attach on the mount [3].
3. When the product is attached on the mount, push it in showing direction until it snaps into place.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>