mikrotik CCR2004-16G-2S Plus PC Ethernet Router 16x Gigabit Ethernet User Guide

May 15, 2024
Mikrotik

mikrotik-LOGO

mikrotik CCR2004-16G-2S Plus PC Ethernet Router 16x Gigabit Ethernet

mikrotik-CCR2004-16G-2S-Plus-PC-Ethernet-Router-16x-Gigabit-Ethernet-
PRODUCT

Specifications:

  • Model : CCR2004-16G-2S+
  • Manufacturer : Mikrotik SIA
  • Address : Unijas 2, Riga, Latvia, LV1039
  • Software Requirement : RouterOS v7.10 or later

Product Usage Instructions

First Steps:

  1. Connect your computer to the device.
  2. Download the configuration tool WinBox.
  3. Open the Neighbors tab and connect to the device using the MAC address.
  4. Default username: admin (password may be blank or check on the sticker).
  5. To update the device software, download the latest RouterOS software from MikroTik website.
  6. Choose ARM64 packages and save them to your computer.
  7. Return to WinBox and upload the downloaded packages.
  8. Restart the device.

Safety Information

  • Be aware of electrical hazards and follow standard safety practices when working with MikroTik equipment.
  • Use only approved power supply and accessories.
  • Installation must be done by trained personnel following local electrical codes.
  • Avoid disassembling, repairing, or modifying the device.
  • Keep the product away from water, fire, humidity, or hot environments.
  • In case of device failure, disconnect it from power immediately.

FAQ

  • Q: Where can I find the latest software for my MikroTik device?
  • Q: What should I do if my device fails?
    • A : In case of device failure, immediately disconnect it from power by unplugging the power plug from the outlet and contact trained personnel for servicing.
  • Q: Can I install the product outdoors?
    • A : No, this product is intended for indoor installation only. Keep it away from water, fire, humidity, or hot environments.

Quick Guide

This device needs to be upgraded to RouterOS v7.10 or the latest version to ensure compliance with local authority regulations!
It is the end users’ responsibility to follow local country regulations. All MikroTik devices must be professionally installed

This Quick Guide covers the model : CCR2004-16G-2S+

This is a network device. You can find the product model name on the case label (ID).
Please visit the user manual page on https://mt.lv/um for the full up-to-date user manual. Or scan the QR code with your mobile phone.

The most important technical specifications for this product can be found on the last page of this Quick Guide.

Technical specifications, Full EU Declaration of Conformity, brochures, and more info about products at https://mikrotik.com/products

Configuration manual for software in your language with additional information can be found at https://mt.lv/help
MikroTik devices are for professional use. If you do not have qualifications please seek a consultant https://mikrotik.com/consultants

First steps

  • Connect with your computer to the device;
  • Download the configuration tool https://mt.lv/winbox;
  • Open the Neighbors tab and connect to the device using the MAC address;
  • The user name: is admin, by default there is no password (or, for some models, check user and wireless passwords on the sticker);
  • To update the device to the latest software version download the latest RouterOS software from https://mikrotik.com/download;
  • Choose ARM64 packages, and save them to your computer;
  • Return to the WinBox and upload downloaded packages;
  • Restart the device.

Safety Information

  • Before you work on any MikroTik equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents. The installer should befamiliar with network structures, terms, and concepts.
  • Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
  • This equipment is to be installed by trained and qualified personnel, as per these installation instructions. The installer is responsible for making sure, that the Installation of the equipment is compliant with local and national electrical codes. Do not attempt to disassemble, repair, or modify thedevice.
  • This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
  • We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
  • In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
  • Electric shock hazard. This equipment is to be serviced by trained personnel only
  • Manufacturer : Mikrotik SIA, Unijas 2, Riga, Latvia, LV1039.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.\

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note : This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.

Innovation, Science and Economic Development Canada

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-003 (B) / NMB-003 (B)

UKCA marking

Technical Specifications

  • Product Power Input Options/ IP class of the enclosure /Operating Temperature
  • 2 AC input (100 – 240 V AC) /IP20/ ±0°..+60°C

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals