REIZEN R-159032 AutoPill Dispenser Reminder with Alarm User Guide

June 6, 2024
Reizen

REIZEN R-159032 AutoPill Dispenser Reminder with Alarm User Guide
REIZEN R-159032 AutoPill Dispenser Reminder with Alarm

TO START

Place 4 AA batteries into the battery compartment
Start Instruction

OPENING THE TRAY

Push on front tab with thumb as shown.
OPENING  TRAY

CLEANING

Surface clean with damp sponge or cloth only.
CLEANING

Remove tray after this step.

PLEASE NOTE: do not place product in direct sunlight or strong ultraviolet light to avoid malfunction.

FILLING DISPENSER

Dispenser includes 6 discs labelled with each day of the week and the number of doses taken each day (1-6 times).

  1. Once a day
  2. Twice a day
  3. Three times a day
  4. Four times a day
  5. Five times a day
  6. Six times a day

With clear plastic tray removed, place the desired disk around hub as shown then fold down tabs to secure it.
FILLING DISPENSER

Then return clear plastic tray back into place.

Organize your medications and assign dose times by yourself, with a caregiver, or with the help of a healthcare professional.
FILLING DISPENSER

Depending on how many doses of medication you take per day, you may need to refill your dispenser more quickly.

1x/day: every 28 days
2x/day: every 14 days
3x/day: every 9 days
4x/day: every 7 days
5x/day: every 5 days
6x/day: every 4 days

CHANGING TIME FORMAT

Dispenser defaults to 24-hour time format. To switch to a 12-hour format, press buttons 2 & 3 at the same time until an AM or PM symbol appears on the right side of the display.

When your prefered time format is displayed, release the buttons.
CHANGING TIME FORMAT

SETTING THE TIME

  1. Press & hold left button until “:” is blinking, then release.
    Setting Instructions

  2. Set the hour using the middle button. Set the minutes using the right button.
    Setting Instructions

  3. confirm time by pressing left button again.
    Setting Instructions

ALARMS

  1. Press the LEFT button & release, causing the “alarm 1” symbol to start blinking. Set the alarm hour using the MIDDLE button and minute using the RIGHT button.
    Alarms Instructions
    To cancel the alarm, press the CENTER button until this image appears: Icon

  2. Once you set the correct alarm time, press the LEFT button to move onto the next alarm.

  3. Once the “alarm 2” symbol is blinking, set this alarm in the same way.

  4. Continue setting alarms 3-6 in this way.

  5. End by pressing the LEFT button until the alarm symbols are no longer blinking.

Hold the CENTER or RIGHT buttons to automatically progress hour or minutes as desired. Display will return to normal function if left alone for more than one minute.

TONE OPTIONS

Choose between alarm tones A,B, or C and your choice will be displayed on the screen. If you choose silent alarms, no choice will be displayed. To change the tone, hold down the RIGHT button while pressing the LEFT button to cycle through tones. Once your desired alarm tone is displayed on the screen, release both buttons.
TONE OPTIONS

TEST

To enter test mode, hold the CENTER button until “CH” appears on the screen. To exit test mode, press the RIGHT button. In order to perform tests, press the LEFT button and the unit will cycle through the following test modes:
TEST
CH1: All segments on the display will light up.
CH2: Motor rotates the tray by one compartment.
CH3: Alarm will sound and LED lights will light up.
Following this test, turn the dispenser over to test the “RESET” function. Alarm and LED will stop. If not stopped in 10 seconds, “CH4” will be displayed on screen.

NOTE: If dispenser does not rotate properly, error message “CH6” will appear on the screen. If this happens, press the right button and replace the batteries to reset.

LOCKING & UNLOCKING

Insert the key and turn it ¼ to the right to unlock or ¼ to the left to lock.
LOCKING & UNLOCKING

STOP ALARM

When the alarm goes off, pick up the dispenser and tilt the pills into your hand or a suitable container.
STOP ALARM

STANDBY/LOW BATTERY

When not in use, the display will shut off and the dispenser enters “Standby Mode.” To wake it up, press the RIGHT button. When batteries are low, a battery symbol with an “X” through it will appear on the screen. When you see this symbol, batteries are low and need to be replaced.

© 2021 Reizen, Inc. All Rights reserved; contents contained within are the exclusive property of Reizen, and its affiliated companies, and may NOT be reproduced without the written consent.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals