TROY-BILT TB-1000PS 12.5 cu ft Poly Swivel Dump Cart Instruction Manual
- June 6, 2024
- TROY-BILT
Table of Contents
TROY-BILT TB-1000PS 12.5 cu ft Poly Swivel Dump Cart
Safety Rules
- Read and understand all safety rules and operating instructions before using this tractor attachment.
- Follow all safety rules and operating instructions provided by your vehicle’s manufacturer when using attachment.
- Never allow children or untrained persons to operate vehicle or attachment.
- Do not exceed the vehicle manufacturer’s towed weight limit.
- Reduce vehicle speed and allow extra stopping distance when towing heavy loads.
- Reduce vehicle speed and towed weight when operating on slopes.
- Operate up and down slopes, never across the face of slopes.
- Do not carry passengers on vehicle or attachment.
- Avoid sudden turns or maneuvers.
- Do not tow attachment on public roadways.
- Do not remove warning decals from product.
- Check product for worn, loose, or damaged parts before each use. If any damage is present, repair the product before using.
- Check product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using.
- Do not exceed vehicle speed of 6 miles per hour when towing Dump Cart.
- Do not exceed Dump Cart rated weight capacity of 1000 pounds.
Warranty
IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE
Email [email protected] or call
1-800-652-2321, ext. 212
Before you call, please email our customer service team at [email protected] with the following:
- A description of the issue you are having
- Photos of the issue that include an overall view and detailed view from multiple angles
- If applicable, a short video showing the issue
Replacement Parts
You can place your parts order online at ohiosteel.com/partsstore
- You can also reach our Customer Service Department at 1-800-652-2321, ext. 212
- If you are ordering replacement part(s) for your product, please note that some parts are only available as a repair kit.
If this product fails due to a defect in material or workmanship within THREE
YEARS from the date of purchase, we will at our option, only with receipt of
purchase, repair or replace it free of charge. This warranty excludes tires,
bushings, and bearings which are expendable and become worn during normal use.
This warranty does not cover:
- Repairs necessary because of operator abuse or negligence.
- Equipment used for commercial or rental purposes.
- Paint that is worn or faded due to normal use or exposure.
To arrange for product repair visit ohiosteel.com/customer-
support and fill out the warranty
repair form. You can also call
1-800-652-2321, ext. 212 to speak to
our Customer Service Team
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. This warranty applies only while
this product is in use in the United States.
Carton Contents
TOOLS REQUIRED FOR ASSEMBLY
- 1/2″ Wrench or Socket
- Grease Gun
Assembly Instructions
-
Hold Poly Body (1) on side as shown. Insert Hex Bolts (3) as shown.
-
Flip Poly Body (1) to expose bolts.
-
Install Undercarriage (2) over top of Hex Bolts. Install and tighten all Locknuts (4).
-
Attach Front Support (5) to Poly Body (1) and tighten Lock Nuts (4).
-
Center Spacer (23) inisde Swivel Clevis (10) on Drawbar Assembly. Insert Axle (6) halfway into Undercarriage (2). Push Axle (6) through Swivel Clevis (10) and Spacer (23) and then through rest of Undercarriage (2).
-
Slide in order: 1″ Washer (24), 2″ Spacer (25), Wheel (22) onto Axle (6), then slide second 1″ Washer (24), and finally secure with Hairpin (26).
-
Depress Foot Pedal (14), insert Drawbar Assembly into Front Support (5) . When Drawbar is locked in place, flip cart upright onto wheels.
Operating Instructions
Before Using Dump Cart
- Apply grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel.
- Check tire pressure and inflate to 28 psi if needed.
- Read all Safety Rules.
How to Use Dump Cart
- Attach Dump Cart to your tractor using the supplied hitch pin.
- Do not exceed 1000 pounds when loading material into the cart body.
- Distribute the weight of the load as evenly as possible in the cart body for best handling.
- When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
- Do not exceed 6 miles per hour when towing Dump Cart.
How to Empty Dump Cart
- Step down the foot pedal to release the latch mechanism.
- Lift the body and swivel as desired to guide the material to preferred location.
- Lift the body entirely and empty material.
- Lower the body and guide the latch into the drawbar and relatch.
Periodic Maintenance
- Tighten fasteners as needed before each use
- Check tire pressure before each use
- Grease wheels annually
Do-It-Yourself Accessories
EXPLODED VIEW
ITEM
| PART NO| DESCRIPTION|
QTY
---|---|---|---
1
| 311161| POLY BODY| 1
2| 6000404-B2| UNDERCARRIAGE|
1
3
| KIT 6004321| 5/16-18 x 1-1/2″ HEX BOLT| 12
4| 5/16-18 LOCK NUT|
12
5
| 6000310-B2| Front Support| 1
6| 300002| AXLE|
1
7
| KIT 6001663-BR| WELDED DRAWBAR| 1
8| SHOULDER BOLT|
1
9
| SPRING WASHER| 1
10| SWIVEL CLEVIS|
1
11
| 1/2″ USS WASHER| 1
12| 3/8″ USS FLAT WASHER|
1
13
| 3/8-16 C-LOCK NUT| 5
14| FOOT PEDAL|
1
15
| KIT 6001663-BR| 3/8-16 x 3″ HEX BOLT| 1
16| 3/8-16 x 3-1/2″ HEX BOLT|
2
17
| BUSHING| 2
18| LATCH|
1
19
| LATCH SPRING| 2
20| SPRING LOADED HITCH|
1
21
| 3/8-16 x 3/4″ HEX BOLT| 1
22| 6002415-1-C| WHEEL (BUSHINGS INC.)|
2
23
| KIT 6004324| 3-1/8″ SPACER| 1
24| 1″ SAE FLAT WASHER|
4
25
| 2″ SPACER| 2
26| HAIRPIN COTTER, 2-5/16″|
2
27
| KIT 6000810| REPLACEMENT BUSHINGS (SET OF 4)|
–