Kawoti 21114 Distressed Wood Table Lamp Set of 2 Instruction Manual
- October 27, 2023
- Kawoti
Table of Contents
Kawoti 21114 Distressed Wood Table Lamp Set of 2 Instruction Manual
Hardware (Parts are not to scale)
H1 Finial (Pre-assembled to harp (H2)) 2 pcs
H2 Harp 2 pcs
H3 Shade panel 2 pcs
H4 Top ring 2 pcs
H5 Bottom ring 2 pcs
H6 Socket assembly (connecting to fixture body (A )) 2 pcs
H7 10W LED Bulb 2 pcs
IMPORTANT SAFETY INFORMATION
- This lamp is for indoor use only. The lamp should not be used near water. Never immerse the lamp in water or other liquids.
- Never cover the lamp with any object including cloth or paper as this is a fire hazard.
- Do not handle the bulb immediately after the light is turned off as it will be hot.
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully inserted. Do not alter the plug.
PREPARATION
- Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with package contents list and diagram on previous page. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts.
ASSEMBLY
SHADE ASSEMBLY
Assembling the shade
- Place the shade panel (H3) and top ring (H4) and bottom ring (H5) from the box.
- Attach the top ring (H4) and the bottom ring (H5) to clips on the shade panel (H3) securely into the clips.
- Attach the shade panel (H3) together by velcro.
- Repeat this step for the second shade.
NOTE: Push and pull the shade panel (H3) to be tight before attach it
together by velcro.
The clips will not fit where the ring and the stretchers meet. The big ring of
the top ring is towards the outside of the shade assembly.
LAMP ASSEMBLY
Assembling the socket assembly
- Properly fold the wire as per the method as shown in the below diagram, and insert the folded wire into tube of the socket assembly (H6).
- Tighten the socket assembly (H6) onto the fixture body (A).
Installing the light bulb
- Install the light bulb (H7) into the socket. Use one MAX 10W medium base (E26) self-ballasted LED bulb (10 W medium base (E26) self-ballasted LED bulb included).
NOTE: You can also use one MAX 100W medium base (E26) type “A” bulb. Do
not exceed the recommended wattage.
Assembling the harp and the shade
- Insert the harp (H2) prongs into the saddle of the socket assembly (H6) and slide the retaining covers over joints to secure the harp.
- Unscrew the finial (H1) from the harp (H2).
- Place the shade assembly onto the harp (H2) and secure with the finial (H1).
Assembling the second lamp
- Repeat steps 1 – 3 for the second lamp.
Using the table lamp
- Plug into the wall outlet. You can touch the metal base of this lamp, it will operate:
- ON
- LOW LIGHT
- MEDIUM LIGHT
- HIGH LIGHT
- OFF
NOTE: The touch switch only works with the metal portion, touch anywhere
not metal is useless.
Please control this lamp through touching the bottom metal base as the below
diagram.
Using the USB port and AC outlet
- On the one side of the base, there is an AC outlet for you to connect any electronic or electrical device of your choice.
- On the other side of the base, there is a built in Dual USB (type A port and one type C port) for you to connect a charging cable (not included) (powers phones, tablets & more).
- The built-in USB port type A and type C rating: 5Vdc, 2.1A.
Documents / Resources
|
Kawoti 21114 Distressed Wood Table Lamp Set of
2
[pdf] Instruction Manual
21114, Distressed Wood Table Lamp Set of 2, 21114 Distressed Wood Table Lamp
Set of 2, Wood Table Lamp Set of 2, Table Lamp Set of 2, Lamp Set of 2
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>