KLEIN TOOLS 56414 Rechargeable 2-Color LED Headlamp Instructions

June 6, 2024
KLEIN TOOLS

KLEIN TOOLS logo 56414
Rechargeable 2-Color LED Headlamp – Instructions

FIG. A FRONT

KLEIN TOOLS 56414 Rechargeable 2 Color LED Headlamp -
overviewKLEIN
TOOLS 56414 Rechargeable 2 Color LED Headlamp -
overview1KLEIN
TOOLS 56414 Rechargeable 2 Color LED Headlamp -
overview2 FIG. B BACK

KLEIN TOOLS 56414 Rechargeable 2 Color LED Headlamp -
overview4

FIG. C MARKER AND PENCIL HOLDER

KLEIN TOOLS 56414 Rechargeable 2 Color LED Headlamp -
overview6

OPERATING INSTRUCTIONS

CHARGING BATTERY

Fully charge headlamp before use. The first-time charge should be at least 6 hours. Connect USB-C cable connection to headlamp, plug the other end of the cable into a USB port (2.0 or higher), or AC adapter (not included). USB adapter/power supply should not exceed the specified charging voltage and current (Max. 5.0V DC, min. 0.5A). The normal charging time is approximately 5 hours.

BATTERY LEVEL INDICATOR:

Press and hold the power button **1** to check the battery level (do not hold down for more than 5 seconds):

  • Four lights on (red, yellow, green, green), unit has 75% to 99% battery charge
  • Three lights on the (red, yellow, green), unit have 50% to 74% battery charge
  • Two lights on (red, yellow), unit has 25% to 49% battery charge
  • One light on the (red), unit has a 15% to 24% battery charge
  • Flashing (red) battery indicator, less than 15% battery charge
  • Spot or Floodlight flashes 5 times, less than 15% battery charge remains.
  • No LED lights, battery is fully discharged. Must leave the unit plugged in to charge for a minimum of 6 hours. If the unit is fully discharged, the battery indicator may not light up immediately when the charging adapter is inserted.

ON/OFF:

  • To activate the headlamp, press and release the power button. The unit will be in HIGH spotlight mode.
  • Hold down the power button to change between modes. Once the desired mode is on, clicking the power button will reduce the brightness. This headlamp has a white LED  spotlight, white LED area light, and red LEDs.
  • NOTE: If the light is on for more than 5 seconds in ANY mode, the next press of the power button will shut it off. This saves time clicking through modes to power down.
  • NOTE: The light will turn on in the same mode last used when turned off.

REMOVAL AND REINSERTION OF THE HEADLAMP ONTO THE BRACKET:

The headlamp can be removed for charging:

  • Pull the lever 9 above the headlamp toward the power button and lift the headlamp from the bracket
  • To reinsert the headlamp, align the slot on the back of the headlamp with the slot on the bracket and push the headlamp down until it clicks in place

FABRIC STRAP:

The fabric strap is designed to fit on a standard hardhat or directly on the head. Silicone is weaved into the fabric strap to make it securely stay on the head or hardhat. The strap is adjustable for larger and smaller diameters.

MARKER AND PENCIL HOLDER:

The marker/pencil holder is attached to the strap. If desired, it can be removed from the strap. It is designed to hold one standard permanent marker and one standard carpenter’s pencil. The marker can be snapped/slid into the semi-circular section from the side. The carpenter’s pencil can be snapped/slid into the second opening on top **13**.

CONTENTS

  • 56414 Headlamp
  • Headlamp bracket with adjustable fabric strap
  • 15″ (381 mm) USB-C Cable
  • Instruction Sheet

GENERAL SPECIFICATIONS

  • Dimensions: 2.25″ x 3.125″ x 1.375″ (57.2 mm x 79.4 mm x 34.9 mm)
  • Weight (headlamp only): 2.96 oz. (84 g)
  • Battery Type: Internal, Lithium polymer, 3.7V / 2000mAh
  • Charging Requirements: Maximum 5V DC, Minimum 0.5A
  • Certifications: BC, CE, NR Can, REACH, RoHS
  • Operating/Charging Temperature: 32°F to 113°F (0°C to 45°C)
  • Storage Temperature: 14°F to 131°F (-10°C to 55°C)
  • Drop Protection: 10 ft. (3 m)
  • Ingress Protection (IP) Rating: IP65 Specifications subject to change.

WARNINGS

Read, understand, and follow these instructions to ensure safe operation. Failure to observe these warnings can result in a risk of fire or electric shock.

  • Keep these instructions for future reference.
  • No user-serviceable parts inside. Do not open the enclosure or attempt to repair this headlamp.
  • Never lubricate any part of this headlamp.
  • DO NOT expose to direct sunlight, open flame, heat sources, equipment that produces heat, or extremes in environmental temperature.
  • Never immerse in water or other liquids. Avoid spilling liquids or falling foreign objects into openings on the headlamp enclosure.
  • The water-resistant cover must be properly sealed to achieve specified water & foreign object ingress protection. Keep seal free of dirt, oil, sand, or other material that interferes with proper sealing. Failure to do so can result in a risk of fire or electric shock.
  • DO NOT open water-resistant cover if wet or in a wet environment. Dry the headlamp thoroughly and seal around the water-resistant cover completely before opening the water-resistant cover.
  • When the headlamp is in use or charging, make sure there is adequate space to allow ventilation of internally generated heat.
  • Use a safety-rated power supply or wall adapter. Never use a power supply or wall adapter that exceeds the specified charging voltage and current.
  • Route the power supply cable so that it will not be stepped on or pinched by other objects.

FEATURE DETAILS (FIG. A)

1 Power button 7 USB-C charging cable
2 Battery level indicator 8 Fabric strap
3 5-LED light 9 Strap adjustment
4 Charging port cover 10 Marker & Pencil holder
5 USB-C charging port 11 Bracket
6 Removal lever 12 Magnet

SYMBOLS ON PRODUCT (FIG. B)

| Warning or Caution
---|---
| Risk of Electrical Shock
| Conformité Européenne. Conforms with European Economic Area directives
| WEEE – Battery disposal
| Conforms with BCS regulations of the California Energy Commission
| Direct Current (DC)
**| Read Instructions
|
Recycle**

MAINTENANCE

CLEANING: Be sure the headlamp is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.
STORAGE: If the headlamp is to be left unused for an extended period of time, charge to approximately 70% (red, yellow, and one green) before storing, and recharge periodically during storage to maintain the battery’s charging capacity.

WARRANTY

www.kleintools.com/warranty

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov or www.erecycle.org for additional information.

OPERATING INSTRUCTIONS
PLEASE SEE THE REVERSE SIDE.

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069
1-800-553-4676
[email protected]
www.kleintools.com

Documents / Resources

| KLEIN TOOLS 56414 Rechargeable 2-Color LED Headlamp [pdf] Instructions
56414, Rechargeable 2-Color LED Headlamp
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

KLEIN TOOLS User Manuals

Related Manuals