NETGEAR Orbi RBR350 WiFi 6 Dual-band Mesh Router User Manual
- June 6, 2024
- NETGEAR
Table of Contents
Let’s get started
On your mobile phone, download the Orbi app and follow the setup instructions.
Download the Orbi app and install your Orbi router
Tap the Security icon in your Orbi app to verify that your NETGEAR Armor™
is activated.
Your Orbi comes with NETGEAR Armor cybersecurity. Armor blocks online threats
like hackers and phishing attempts on your devices.
Secure your devices with NETGEAR Armor
Check out everything you can do on the Orbi app! Run a speed test, pause the Internet, see all the connected devices, and more.
Do more with the app
Contents
Overview
- Sync Button
- Internet Port
- Ethernet Ports
- Power Connector
- Reset Button
- Power LED
Troubleshooting
If you’re having problems with the installation, try the following:
-
Turn off your modem and Orbi router and disconnect them.
Reboot your modem. Reconnect your Orbi router to your modem, and try installing with the Orbi app again. -
If you’re still unable to install your Orbi router using the Orbi app, install it manually using the router web interface.
Visit orbilogin.com to access the router web interface.
For more information, visit netgear.com/orbihelp.
Support and Community
Visit netgear.com/support to get your questions
answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3, University Technology Centre
Curraheen Road, Cork, T12EF21, Ireland
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of
NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
May 2021