ergotron Zip40 Charging Cart User Guide
- June 6, 2024
- ERGOTRON
Table of Contents
Zip40 Charging Cart
User’s Guide
Zip40 Charging Cart
Includes PowerShuttleTM Technology
ENGLISH
Components
2x
9x
Tools Needed
www.ergotron.com
USA: 1-800-888-8458 Europe: +31
(0)33-45 45 600 China: 400-120-3051 Japan: [email protected]
)RUWKHODWHVW8VHU,QVWDOODWLRQ*XLGHSOHDVHYLVLWZZZHUJRWURQFRP
(QJOLVK(VSD³RO)UDQ©DLV’HXWVFK1HGHUODQGV,WDOLDQR6YHQVND
888-24-396-G-00 rev. D · 01/21
1 of 17
Hazard Symbols
Symbol
Review
These symbols alert users of a safety condition that demands attention. All users should be able to recognize and understand the significance of the following Safety Hazards if encountered on the product or within the documentation. Children who are not able to recognize and respond appropriately to Safety Alerts should not use this product without adult supervision!
Signal Word
Level of Hazard
NOTE
A NOTE indicates important information that helps you make better use of this product.
CAUTION
A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
WARNING
A WARNING indicates either potential for property damage, personal injury, or death.
ELECTRICAL
An Electrical indicates an impending electrical hazard which, if not avoided, may result in personal injury, fire and/or death.
Safety
Warning: Unplug power cable from outlet and make sure power button is turned
off before removing side cover. Removing side cover with power on may cause
equipment damage and/or serious personal injury.
ENGLISH
WARNING
MOVING PARTS
CAN CRUSH AND CUT
Unplug power cord.
DO NOT place hands on or near fans.
Placing hands on or near fans may
cause equipment damage and/or
serious personal injury.
828-196
WARNING: MOVING PARTS CAN CRUSH AND CUT. Unplug power cord. DO NOT place hands on or near fans. Placing hands on or near fans may cause equipment damage and/or serious personal injury.
2 of 17
888-24-396-G-00 rev. D · 01/21
Features & Specifications
Four 12V continuous operating fans External auxiliary outlet 2 receptacles
US, JP
1 receptacle EU, UK, AU, CN Power Button Cable wrap
4x
OPTIONAL Lock not included
A < 25 lbs. (11.3 kg)
B < 76.5 lbs. (34.7 kg)
C < 76.5 lbs. (34.7 kg)
D < 76.5 lbs. (34.7 kg)
A + B + C + D + E < 255 lbs. (116 kg)
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR
PROPERTY DAMAGE MAY OCCUR!
ENGLISH
888-24-396-G-00 rev. D · 01/21
3 of 17
1 Open doors.
ENGLISH
4 of 17
888-24-396-G-00 rev. D · 01/21
2 Choose configuration for number of devices.
40x Cart is already configured for this, please skip to page 9.
Slot Size: 1.1″ (27.9 mm)
15x
15x
7
10x
30x Dividers and Ethernet cables will need to be reconfigured for this set up,
please see instructions on pages 6-8.
Slot Size: 1.9″ (48.3 mm)
10x
10x
6
10x
ENGLISH
888-24-396-G-00 rev. D · 01/21
5 of 17
30x
a To configure for 30 devices, remove dividers. i. Pull lever towards you.
i
ii. With lever pulled, slide divider towards you.
iii. Lift up and off.
ii
iii
b To configure for 30 devices, reattach dividers, 10 per shelf. i. Insert tabs
on bottom of divider into designated holes on shelf. ii. Slide divider away
from you to lock into place.
i
ii
ENGLISH
6 of 17
888-24-396-G-00 rev. D · 01/21
40x
30x
3 Attach spacers if your devices are < 9″ (229 mm).
40x 3x 2x
30x 3x
ENGLISH
888-24-396-G-00 rev. D · 01/21
7 of 17
4 Remove back panel.
5 Plug in and route power cables. There are different instructions for each
type of power cable. Follow the instructions that match your style power
cable.
10
a. Plug in the power cables for the top shelf. Use the top row of outlets, and for the 40 device configuration, every other outlet on the second row. Store the power cables in the top basket. b. Route the device plugs between the basket and the top outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device. c. Bundle cables and store in top basket.
a
b
ENGLISH
8 of 17
888-24-396-G-00 rev. D · 01/21
d. Plug in the power cables for the Middle shelf. Use the entire third outlet row, and for the 40 device configuration, the remaining outlets on the second row. Store the power cables from the second outlet row in the top basket and the power cables from the third row in the bottom basket. e. Route the device plugs under the third outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device. f. Bundle cables and store in the baskets.
d
e
ENGLISH
g. Plug in the power cables for the bottom shelf. Use the bottom row of outlets. Store the power cables in the bottom basket. h. Route the device plugs between the basket and the bottom outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device. i. Bundle cables and store in bottom basket.
g
h
11
888-24-396-G-00 rev. D · 01/21
9 of 17
Remove the baskets designed to hold the power supplies that are not present with this type of power cable. a. Lift basket up to unlock tab. b. Pull basket out. c. Lift bottom basket up to unlock tab then pull out.
a
b
c
d. Plug in the power cables for the top shelf. Use the top row of outlets, and for the 40 device configuration, every other outlet on the second row. Route the device plugs under the top outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device.
e. Plug in the power cables for the Middle shelf. Use the third row, and for the 40 device configuration, the remaining outlets on the second row. Route the device plugs under the third outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device.
f. Plug in the power cables for the bottom shelf. Use the bottom row of outlets. Route the device plugs under the bottom outlet row and up through the top of the dividers. Make sure there is enough slack in cable to plug into device.
d
e
f
ENGLISH
10 of 17
888-24-396-G-00 rev. D · 01/21
6 Attach back panel.
a
b
c
ENGLISH
Optional Wireless Access Point (WAP) (not included).
7 Unplug power cable from cart and remove side cover.
WARNING
MOVING PARTS
CAN CRUSH AND CUT
Unplug power cord.
DO NOT place hands on or near fans.
Placing hands on or near fans may
cause equipment damage and/or
serious personal injury.
828-196
WARNING: MOVING PARTS CAN CRUSH AND CUT. Unplug power cord. DO NOT place hands on or near fans. Placing hands on or near fans may cause equipment damage and/or serious personal injury.
888-24-396-G-00 rev. D · 01/21
11 of 17
8 Attach WAP with velcro strap. Plug WAP into Auxiliary outlet.
Access door to unplug WAP.
9 Attach side cover and plug power cable back into cart. NOTE: Route WAP Ethernet cable through side cover access door.
a
b
ENGLISH
12 of 17
888-24-396-G-00 rev. D · 01/21
10 Plug in and insert devices.
ENGLISH
11 Plug in power cable and turn cart power on.
888-24-396-G-00 rev. D · 01/21
13 of 17
Cleaning and Maintenance
WARNING: Failure to observe the following safety notices may result in serious
personal injury or equipment damage. Inspect for damage, dirt and debris on a
regular basis. All paint and plastic components used in the Cart will
withstand cleaning by most commonly used, diluted, nonabrasive solutions such
as quaternary ammonia compounds, ammonia enzyme cleaners, bleach, or alcohol
solutions. It is recommended that any cleaning solution be tested on a small,
inconspicuous area to ensure it does not harm the surface of the Cart. · Marks
from permanent marker, dry-erase marker, and pens can be removed with 91%
isopropyl alcohol and a soft cloth. · Iodine stains can be removed with
commonly used cleaners and a soft cloth. · Do not use steel wool or other
abrasive materials that may damage the surface finish.
Electrical: To avoid risk of electric shock, do not expose electrical
components to water, cleaning solutions or other potentially corrosive liquids
or substances.
Electrical: Do not immerse Cart or Cart components in liquid or allow liquids
to flow into the Cart. Wipe all cleaners off surface immediately using a damp
cloth. Dry the surface thoroughly after cleaning.
Electrical: Do not use flammable cleaners on Cart surfaces.
CAUTION: Adjustment, Service, Replacement – DO NOT attempt to adjust, service
or replace any part of the Cart unless directed to do so through Ergotron-
approved documentation (i.e. installation instructions). Only Ergotron, Inc.
or an Ergotron-certified entity may adjust, service or replace Cart
components. If any component on the Cart is missing or damaged, the Cart must
not be used. Contact Ergotron immediately to request a replacement part.
CAUTION: Casters – Check casters periodically to make sure they are clean and
free of debris that would prevent smooth travel. Avoid moving Cart across
uneven, dirty, or damaged surfaces.
CAUTION: Customer Equipment- Make sure equipment is balanced and installed
securely to Cart. Contact Ergotron for information about moving Cart
components.
ENGLISH
Equipment Electrical Safety
There are specific risks associated with the use of equipment having power
cables. You must be aware of, and avoid these risks when the Cart is located
in close proximity to children.
WARNING: Failure to observe the following Electrical Safety notices can result
in fire or death by electric shock.
Electrical cables can be hazardous. Misuse can result in fire or death by
electrical shock. · Double Pole / Neutral Fusing · Inspect power cables
thoroughly before each use. · Do not use cables that are damaged. · Insert the
plug completely into the outlet. · Grasp the plug to remove from the outlet. ·
Do not unplug by pulling on the cable. · Do not use excessive force to make
connections. · Do not plug the cable into an extension cable. · Do not remove,
bend or modify any metal prongs or pins of cable. · Do not drive, drag or
place objects over the cable. · Do not walk on the cable. · Avoid overheating.
Uncoil the cable and do not cover it with any material. · Do not run cable
through doorways, holes in ceilings, walls or floors.
Keep the Cart away from water. · Do not use it when wet. · Do not place the
Cart in close proximity to flammable liquids or gases.
CAUTION: The power disconnect for this equipment is the AC power cable.
Therefore the socket outlet should be easily accesible and should be installed
near the equipment.
14 of 17
888-24-396-G-00 rev. D · 01/21
Safe Use Recommendations
There are specific risks associated with the use of Cart when moving or
stationary (for charging or storage). You must be aware of, and avoid these
risks when the Cart is located in close proximity to children.
WARNING: Failure to observe the following Cart Use Safety notices may result
in serious personal injury or equipment damage.
WARNING: Death or serious injury may occur when children climb on audio and/or
video equipment furniture. A remote control or toys placed on the furnishing
may encourage a child to climb on the furnishing and as a result the
furnishing may tip over on to the child.
WARNING: Relocating audio and/or video equipment to furniture not specifically
designed to support audio and/or video equipment may result in death or
serious injury due to the furnishing collapsing or over turning onto a child.
Only Adults should move this cart. · Do not allow anyone to sit, stand, or
climb on the Cart. · Do not lift the Cart from the bottom. · Do not block the
fans and vent openings. To prevent overheating, leave at least 127 mm (5-inch)
clearance around fans and vents. The Cart is designed to be used indoors only.
· Do not use the Cart to transport or store equipment other than what has been
noted in this guide. · Do not use the Cart to store liquids or cleaning
supplies. · Do not place heavy objects on the Cart surface or shelf. The
maximum weight capacity of the top surface is 11.4 kg (25 lb). The maximum
weight capacity of the shelf is 34.7 kg (76.5 lb). No TV/Monitor is to be
used on top of cart.
Moving the Cart · Before moving the Cart: 1. Disconnect the power cable from
the wall. 2. Disconnent Ethernet cable from the wall if present. 3. Make sure
the cable is wrapped and secure. 4. Close and lock the doors. 5. Remove items
from the top work surface. 6. Unlock the casters. · Push (do not pull) the
Cart for optimum maneuverability and to prevent muscle strain. · Do not move
the Cart across rough, uneven or irregular surfaces such as gravel.
Parking the Cart Observe these safety alerts for times when the cart is
stationary: · Do not park the Cart in areas of heavy traffic. · Do not run
cables through doorways, holes in ceilings, walls, or floors. · Do not run
cables across hallways, classrooms, or other areas where they will be walked
on. · Do not leave Cart unattended in areas where children have access. · Keep
Cart doors closed and locked whenever it is unattended or parked for charging
or storage. · Keep Cart casters locked whenever it is unattended.
ENGLISH
DANGER! Electrical cables can be hazardous. Misuse can result in fire or death
by electrical shock.
888-24-396-G-00 rev. D · 01/21
15 of 17
Specifications
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: 1) This device may not cause harmful
interference. 2) This device must accept any interference received, including
interference that may cause undesired operation. CAN ICES3(A)/NMB-3(A).
Changes or modifications not expressly approved by the Ergotron could void the
user’s authority to operate the equipment. Intended for institutional use.
Cart dimensions 30.3″W x 45.4″H x 26.1″D (77x115x66 cm)
Cart weight (without equipment) 175 lb (79 kg)
Rated weight capacity Top Work Surface 25 lb (11.3 kg)
Device Slot Size 17.1″W x 11.2″H (43.4×28.4 cm) Device with case and power
cord installed must fit within these dimensions.
Max Dimensions of WAP 10″W x 10″H x 2.2″D (25.4×25.4×5.6 cm)
Cooling/ventilation Four 12V DC fans, ventilated doors and side panel
External power outlet(s) One or two outlets, depending on region 100-120V~, 4A
max, 50/60 Hz or 220-240V~, 2A max, 50/60 Hz
WAP and Switch Outlets 100/120V~, 4A max, 50/60 Hz or 220-240V~, 2A max, 50/60
Hz
Shipping dimensions 37″W x 52″H x 30″D (94x132x75 cm)
Shipping weight 221 lb (100 kg)
Power system 100-120V~,12A, 50/60Hz Maximum input for 5 devices cannot exceed
8.5A or 220-240V~,10A, 50/60Hz Maximum input for 5 devices cannot exceed 4.0A
Environmental Temperature range: Operating 0° to 30°C (32° to 86°F) Storage
-40° to 60°C (-40° to 140°F)
Relative humidity (maximum): Operating 10%90% (non condensing) Storage 5%95%
(non condensing)
Altitude (maximum): 2000 m (6,562 ft)
Certification: UL / IEC / EN 62368-1 Audio/Video Information and Communication
Technology Equipment. CAN/CSA C22.2 No. 62368-1-14 UL 1678 Household,
Commercial, and Institutional-Use Carts, Stands, and Entertainment Centers for
Use with Audio and/or Video Equipment. ICES-003 Issue 5, Class A FCC Part 15
Class A RoHS and REACH compliant material used.
ENGLISH
16 of 17
888-24-396-G-00 rev. D · 01/21
For Warranty visit: www.ergotron.com/warranty For Service visit:
www.ergotron.com For local customer care phone numbers visit:
http://contact.ergotron.com
NOTE: When contacting customer service, reference the serial number.
ENGLISH
888-24-396-G-00 rev. D · 01/21
www.ergotron.com
USA: 1-800-888-8458 Europe: +31
(0)33-45 45 600
China: 400-120-3051 Japan: [email protected]
k(UJRWURQ,QF$OOULJKWVUHVHUYHG (UJRWURQ,QFLUNHWLQLQWHVFLOOLWLFDULPDUNDVóGóU
17 of 17