GLI-200 Earthquake Sound Corp User Guide
- June 6, 2024
- Earthquake
Table of Contents
GLI-200 Earthquake Sound Corp User Guide
Earthquake Sound Corp.
510-732-1000 | U.S. Toll Free:
800-576-7944
www.earthquakesound.com
The Earthquake Sound GLI-200 is a device that was designed to resolve the issue of ground loop which can be common in audio systems. The standard A/V receiver output is 600Ω yet most ground loop isolators on the market today have 200Ω at best. If using a substandard product, your A/V receiver has to deliver 3X more current and or compromise the output level. The GLI200 comes with an impedance of 600Ω right out of the box matching that of the industry standard. Unlike other products on the market, Earthquake’s GLI-200 is constructed with high-quality components and will not roll-off the low frequency response due to undersized transformers resulting in substandard performance. It was designed to kill off the dreaded buzz noise or ground loop while maintaining high-quality sound from your audio system.
The compact and rugged construction of the GLI-200 allows for it to fit into virtually any audio system and can be mounted to any surface with its built-in mounting bracket. This will give you a cleaner looking install and allow it to be hidden out of sight. The GLI-200 can be applied to audio applications that accept an RCA input and output. The GLI-200 is a great problem solving tool from the everyday home and car audio enthusiast to the professional installer or integrator.
Home Audio
Connect the GLI-200 between the A/V Receiver/Processor and a powered subwoofer via RCA cables.
Mobile Audio
Connect the GLI-200 between the stereo receiver/processor front, rear, or sub outputs and a stereo or mono amplifier inputs via RCA cables.
Earthquake Sound Corporation
2727 McCone Avenue, Hayward, CA 94545 •
tech@earthquakesound.com •
510-732-1000
©2020 Earthquake Sound Corporation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>