Earthquake Sound MiniMe DSP P8 and FF8 Subwoofers User Manual

Earthquake Sound MiniMe DSP P8 and FF8 Subwoofers

WARNING: This product is capable of generating high sound pressure levels. You should exercise caution when operating these speakers. Long term exposure to high levels of sound pressure will cause permanent damage to your hearing. Sound pressure levels exceeding 85dB can be dangerous with constant exposure. Set your audio system to a comfortable loudness level. Earthquake Sound Corp. Does not assume liability for damages resulting from the direct use of Earthquake Sound audio product(s) and urges users to play volume at moderate levels.

Earthquake Sound Corporation

2727 McCone Ave. Hayward, CA 94545. USA
Tel: 510-732-1000

© 2019 Earthquake Sound Corporation. All rights reserved.

This document should not be construed as a commitment on the part of Earthquake Sound Corporation. The information is subject to change without notice. Earthquake Sound Corporation assumes no responsibility for errors that may appear within this document.

2 Specifications are subject to change without notice

“There might be better subwoofers on the planet, but I haven’t heard them.”

Steven Stone, Home Theater Magazine

FOR YOUR RECORDS

• Date of Purchase: ………………………………………………..
• Authorized Dealer/Installer Info: ………………………………………………..
• Name: ………………………………………………..
• Address: ………………………………………………..
• Phone: ………………………………………………..
• Serial Number: ………………………………………………..
• Notes: ………………………………………………..

ABOUT EARTHQUAKE SOUND

For over 30 years, Earthquake Sound has been producing a variety of high quality audio products that have impressed audiophile communities around the world. It all started in 1984 when Joseph Sahyoun, a music freak and Aerospace Engineer unhappy with the existing loud speaker technology and performance, decided to put his advance engineering knowledge to use. He pushed technological boundaries to the limit to create the kind of subwoofer he could live with. Earthquake quickly created a name for itselfin the car audio industry and became well known for its powerful subwoofers and amplifiers. In 1997, using his existing expertise in the audio industry, Joseph Sahyoun expanded his company to home audio production. Earthquake Sound has since evolved into a leader in the home audio industry, producing not only subwoofers and amplifiers but surround speakers and tactile transducers as well. Engineered by audiophiles for audiophiles, Earthquake Sound audio products are meticulously crafted to reproduce each and every single note perfectly, bringing your home theater experience to life. With true dedication and full attention to details, Earthquake Sound engineers continuously develop new and better products to meet customers’ needs and go beyond their expectations.

From mobile audio to prosound and home audio, Earthquake Sound has been selected as the winner of many prestigious awards based on sound quality, performance, value, and features. CEA and numerous publications have awarded Earthquake Sound with over a dozen design and engineering awards. Additionally, Earthquake Sound has been granted many design patents by the USPTO for revolutionary audio designs that have changed the sound of the audio industry. Headquartered in a 60,000-square-foot facility in Hayward, California USA, Earthquake Sound currently exports to over 60 countries worldwide. In 2010, Earthquake Sound expanded its export operations by opening a European warehouse in Denmark. This accomplishment was recognized by the US Department of Commerce who honored Earthquake Sound with an Export Achievement award at the 2011 Consumer Electronic Show. Just recently, the US Department of Commerce presented Earthquake Sound with another Export Achievement award for expanding its export operations in China.

SAFETY INSTRUCTIONS

SAFETY FIRST

This document contains general safety, installation, and operating instructions for the MiniMe DSP 8 subwoofer. It is important to read this user’s manual before attempting to use this product. Pay particular attention to the safety instructions.

SYMBOLS EXPLAINED

Appears on the component to indicate the presence of uninsulated, dangerous voltage inside the enclosure – that may be sufficient to constitute a risk of shock.

CAUTION:  Calls attention to a procedure, practice, condition or the like that, if not correctly performed of adhered to, could result in injury or death.
WARNING:  Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result in damage to or destruction of part or all of the product.
NOTE: Calls attention to information that is essential to highlight.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions in their entirety.
2. Store this manual and packaging in a safe place.
3. Read all warnings.
4. Follow instructions (do not take shortcuts).
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. The grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments and accessories specified by the manufacturer.
12. Use only a compatible rack or cart for the final resting position.
13. Unplug this apparatus during lightning storms or when unused for a long period of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way such as: power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

SYSTEM INSTALLATION CONSIDERATIONS

• There are several factors to consider before installing or placing Earthquake Sound’s MiniMe DSP 8 Subwoofer.
• What are the intended listening zones?
• From where in each zone will the listener prefer to control the system? Where will the subwoofer be located?
• Where will the source equipment be located?

CONNECTION TIPS

• Keep all power cords away from all signal cables to prevent humming from induced noise.
• Choose reliable signal cable cords (Earthquake Sound also specializes in high performance RCA cables and patches).
• All speaker wires that are ran trough the walls should be twisted type to reduce potential hum noise pick-up.
• It is best to use a grounded electrical outlet to power the amplifier. Lack of input ground reference could be unsafe. Consult with your electrical contractor about proper grounding.

SAFE AND PROPER HANDLING

The MiniMe DSP 8 subwoofer can be moderately heavy for an average person to carry or maneuver. To prevent injuries and eliminate any possible damage to the subwoofer, we encourage you to seek help if needed when unpacking the unit. We further suggest the following.

• wear a back support belt if needed when carrying/lifting the MiniMe DSP 8.
• If possible, get someone to help you move the MiniMe DSP 8 subwoofer.
• Do not apply pressure or push against the face of the speaker as this will cause irreparable damage to the cone and suspension.
• When carrying the MiniMe DSP 8, make sure that the speakers/grilles are positioned away from your chest, eliminating the chance of pushing against the face of the speaker.
• Do not drop the MiniME DSP 8 or subject it to sudden shocks. This will damage the external finish and weaken the enclosure, creating air leaks.
• Avoid exposing the MiniMe DSP 8 to moisture. Water will damage the wood structure as well as the amplifier and speaker.
• Cleaning the MiniMe DSP 8 is best using a soft cloth. If needed, use a mild detergent with water. Like any other electrical unit, always make sure that the unit is unplugged prior to cleaning it.

UNPACKING THE MINUTE DSP

• Keep the original carton and packing materials for future shipment storage.
• Check for any visual signs of damage. If you encounter any concealed damage, consult your Earthquake Sound dealer before proceeding with unit installation.
• Retain the sales receipt as it establishes the duration of the limited warranty and provides information for insurance purposes.

The MiniMe DSP 8 is packaged well for safety. We highly suggest having a padded surface ready before unpacking the subwoofer.

STEP 1

• On a padded surface, care fully place the box on its side to remove the bottom packing tape and staples.

STEP 2

• Without tilting the box too much, tug the bottom flaps outward and keep the protective foam in place.

STEP 3

• Gently re-position the box upright.

STEP 4

• Slide the box off, minding the protective foam on the top, bottom, and sides of the subwoofer.

DIMENSIONS AND SPECIFICATIONS MiniMe DSP FF8

• ENCLOSURE TYPE: Sealed Front Firing
• AMPLIFIER POWER: 600 Watts MAX
• DRIVERS: 8 Premium Extended Excursion Active Driver
• FREQUENCY RESPONSE: 25Hz-160Hz
• CROSSOVER FREQUENCY: 40Hz-160Hz
• SIGNAL SENSING:  AUTO/ON/OFF
• INPUTS/OUTPUTS: Low Level RCA Input
  • Mono DSP RCA Output
• OTHER FEATURES: Auto Room Tuning Adjustments 0-180° Phase Adjustment Switch IR Remote & Remote Eye 110V /220V AC Selector iWooferTM Compatible
• FUSE RATINGS: 110-120V-60Hz: 05×20, T6.3AL/250V
  • 120-240V~50Hz: 05×20, T3.15AL/250V

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there Is no guarantee that interference will not occur In a particular Installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio!TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful Interference.
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

WARRANTY INFORMATION

5 YEAR LIMITED WARRANTY INFORMATION

Earthquake Sound warrants the original purchaser that all Factory Sealed New Audio products be free from defects in material and workmanship, under normal and proper use, for a period of five (5) year from the date of purchase (as shown on the original sales receipt with serial number affixed/written on it). The one (1) year warranty period is valid only if the product is properly installed by an Earthquake Sound authorized party and the warranty registration card is properly filled out and sent to Earthquake Sound Corporation. If the product is installed by a non-authorized party, a thirty (30) day warranty period applies.

Five Sl year limited warranty guidelines

• First Year: Earthquake pays for labor, parts and ground freight (US Mainland only, not including Alaska and Hawaii.) Shipping to us is not covered.
• Second, Third, Fourth, & Fifth Year: Earthquake pays labor only. Customer must pay for parts and freight both ways.

Warning

• Products (sent for repair) that are tested by Earthquake technicians and deemed to have no problem(s) will not be covered y the limited warranty. Customer will be charged a minimum of one (1) hour of labor (at ongoing rate) plus the shipping charges back to the customer.
• Each product sent in for repair must be packaged in its original packaging. Otherwise, repackaging charges will apply in addition to the labor, parts, and shipping charges.

Earthquake agrees to repair or replace – at our discretion – all such defective products/parts subject to the following provisions

• Defective products/parts have not been altered or repaired by other than an Earthquake factory-approved technician.
• Products/parts are not subjected to negligence, misuse, accident, or damage by improper line voltage.
• Products/parts were used with incompatible products.
• The serial number or any part of the product has been altered, defaced, or removed.
• Products/parts have been used in any way that is contrary to Earthquake’s written instructions.

Warranty Limitations

Earthquake warranty does not cover products that have been modified or abused, including but not limited to the following:

• Damages due to misuse, abuse or use of improper cleaning materials/methods
• Bent speaker frame, broken connectors, hole(s) in speaker cone, hole(s) in surround or dist cap, and burnt speaker voice coil.
• Fading and/or deterioration of speaker components & finish due to improper exposure to elements.
• Burnt tracers on PCB
• Product/part damaged due to poor packaging or abusive shipping conditions
• Subsequent damage to other products

A warranty claim will not be valid if the warranty registration card is not properly filled & returned to Earthquake with a copy of the sales invoice.

Service Request

To receive product(s) service, contact Earthquake Sound’s service department at 510-732-1000 or tech@earthquakesound.com and request an RMA (Return Material Authorization) number as item(s) shipped without a valid RMA number will be refused. Make sure you provide us with your complete and correct shipping address, a valid daytime phone number, and a brief description of the problem you are experiencing with the product. In most cases, our technicians might be able to resolve the problem over the phone or via e-mail, thus eliminating the need to ship the product.

Shipping Instructions

Product(s) must be packaged inside its original protective box(es) to minimize transportation damage. Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound Corporation reserves the right to refuse improperly packaged product(s). A copy of the original sales receipt must accompany the product(s) returned for service. Ship the product(s) to: Earthquake Sound Corporation. 2727 McCone Avenue. Hayward, CA 94545 The customer is responsible for the cost of shipping the product(s) to Earthquake Sound Corporation

Disputes Resolution

All disputes – between clients and Earthquake Sound Corporation – resulting from the one (1) year limited warranty policy must be resolved according to the laws & regulations of the county of Alameda, California.

Earthquake Sound reserves the right to amend details of the specifications without notice

• @ Copyright Earthquake Sound Corporation
• www.earthquakesound.com
• www.earthquakesoundshop.com
• 2727 McCone Avenue, Hayward, CA 94545 USA
• Phone: 510-732-1000

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>