anko Digital Peephole Door Viewer Door Bell Outdoor Door User Manual
- June 6, 2024
- Anko
Table of Contents
User Manual
42967217
Digital Door Viewer
Caution :
Please read the user manual before using the product. Please keep this manual
for future reference.
Warning:
- Please do not dismantle the device.
- Do not use this product in a high temperature/humidity/salty environment.
- Do not bend the cable.
- Please use an alkaline 1.5V AAA battery.
Installation instructions
Step 1: Choose a suitable screw according to the door thickness, put the
screw into the hole in the barrel of the outdoor unit.
Step 2: Insert the barrel together with the FPC cable through the door
peephole, then hold the outdoor part on the door
Step 3:Take out the metal bracket (the”up” arrow on the bracket means upward)
pass the FPC cable through the rectangular hole, screw the metal bracket into
the outdoor part tightly.
Step 4: Connect the FPC cable from the outdoor unit to the connector of the
indoor unit
Step5: The four slots on the back of the indoor unit are aligned with four
hooks on the metal bracket and buckle up, then pull down the indoor unit to
lock tightly.
OPERATION
1. LCD Display
2. left key
3. Power/Confirm key
4. Right key| 5. Doorbell key
6. IR LED
7. Camera
---|---
- Power on/off: Press “doorbell key” or “power key” the indoor part will turn on and ring. Press the “power key” for 3 seconds, the device will turn off.
- Take a photo: Press “doorbell key”, the device will turn on and take a photo; in power on mode, pressing “power key” it will take a photo too.
- Review photo: in power on mode, press “left key” or “right key” to review photos.
- Delete photos: in power on mode or when reviewing photos choice one certain photo, press the “right key” for three seconds to delete it. Press the left key” for three seconds to delete all photos.
- Set power off time: In power-on mode, press the “right key” for three seconds to select the power off time:15s/25s/off.
Technical Specifications
| LCD screen | 2.8 inch | Material | ABS plastic |
|---|---|---|---|
| Resolution | 320.240 | Vision angle | 90 |
| Memory | Built-in cyclic storage in device | Product Size | Indoor part: |
1276813mm Outdoor part: 58*13mm
Battery| 1.5V AAAX4| Door hole Diameter| 14-22mm
Camera| 0.3 MP| Door thickness| 35- 120mm
IR LEDS| 2 PCS,850nm| Tempera true| -20°C — 55C °C
Products Accessories
Metal Bracket1
User manual1
Screws*3
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law. Kmart will provide you with
your choice of a refund, repair or exchange (where possible) for this product
if it becomes defective within the warranty period. Kmart will bear the
reasonable expense of claiming the warranty. This warranty will no longer
apply where the defect is a result of alteration, accident, misuse, abuse, or
neglect. Please retain your receipt as proof of purchase and contact our
Customer Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New
Zealand) or alternatively, via Customer Help at
Kmart.com.au for any difficulties with your product.
Warranty claims and claims for expenses incurred in returning this product can
be addressed to our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic
3170. Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. For New Zealand customers, this warranty is in addition to
statutory rights observed under New Zealand legislation.