BRAYER BR1502 Kitchen Machine Instruction Manual
- October 27, 2023
- BRAYER
Table of Contents
- DESCRIPTION
- SAFETY MEASURES AND OPERATION RECOMMENDATIONS
- BEFORE THE FIRST USE
- USING THE ATTACHMENTS
- ATTACHMENTS USAGE
- USING THE KITCHEN MACHINE
- CLEANING AND MAINTENANCE
- STORAGE
- DELIVERY SET
- TECHNICAL SPECIFICATIONS
- RECYCLING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BRAYER BR1502 Kitchen Machine Instruction Manual
The kitchen machine is intended to be used for dough kneading, minced meat stirring, mixing of various ingredients, cooking of sauces, mayonnaise, whipped cream, etc.
DESCRIPTION
- Blender Bowl Housing Cover
- Motor Unit
- Motor Unit Locking Button
- Operation Mode Switch «Р-0-1—10»
- Base
- Food Bowl Housing
- Food Bowl
- Bowl Cover
- Attachment Wheel
- Bowl Cover Housing
- Meat Grinder Socket Cover
- Whisker
- Beater
- Dough Hook
SAFETY MEASURES AND OPERATION RECOMMENDATIONS
Read the operation manual carefully before using the kitchen machine; after reading, keep it for future reference.
- Use the unit for its intended purpose only, as it is stated in this manual.
- Mishandling the kitchen machine can lead to its breakage and cause harm to the user or damage to his/her property and it is not covered by warranty.
- Make sure that the operating voltage of the unit indicated on the label corresponds to your home mains voltage
ATTENTION! Do not operate the appliance continuously for more than from 3 to 10 minutes (depending on the attachment), after which make a pause for a minimum of 10-20 minutes.
- Do not use the unit outdoors.
- It is recommended not to use the unit during lightning storms.
- Place and use the kitchen machine only on a dry flat and stable surface, away from heat sources, open flame and direct sunlight.
- Do not use the unit near heating appliances, heat sources or open flame.
- Do not use the kitchen machine in places where aerosols are stored, used or sprayed, and in proximity to inflammable liquids.
- Protect the unit from blows, drops, vibrations and other mechanical stress.
- Do not block the ventilation openings on the unit body during the kitchen machine operation; this may lead to the electric motor overheating.
- Never leave the unit connected to the mains unattended. Do not immerse the kitchen machine body, the power cord or the power plug into water or any other liquids.
- Do not use the unit in proximity to the kitchen sink, in bathrooms, near swimming pools or other containers filled with water.
- If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of water. Apply to the authorized service center for testing or repairing the unit.
- Do not let the power cord touch hot surfaces and sharp edges of furniture.
- Handle the power cord with care, avoid twisting it and periodically straighten the cord.
- Do not use the power cord as a carrying handle for the kitchen machine.
- Do not touch the unit body, the power cord and the power plug with wet hands.
- Unplug the unit after usage or before cleaning. When unplugging the unit, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage and cause a short circuit.
- Before using the unit for the first time, wash thoroughly all the removable parts of the kitchen machine that will contact food.
- Use only the parts supplied with the kitchen machine.
- Before installing the required attachment, make sure the power plug is not connected to an electrical outlet.
- Before using the unit, make sure that all parts of the kitchen machine are installed correctly and the attachment is securely fixed.
- Be careful when setting the motor unit in the operation position, avoid any foreign objects to get between the motor unit and the base of the kitchen machine.
- Before connecting the power plug to an electrical outlet, make sure the operation mode switch knob is in the «0» position.
- Do not use the kitchen machine to mix hard butter or frozen dough.
- Do not touch the rotating attachment during the kitchen machine operation, avoid any foreign objects to get in the attachment rotating zone.
- When you have finished cooking food, turn off the kitchen machine, disconnect the power plug from the electrical outlet, lift the motor unit and detach the attachment.
- Do not turn on or use the Blender Attachment with no food inside the Blender Bowl.
- Cool down hot food to 40 °С or lower before placing it inside the Blender Bowl.
- Do not overload the Blender Bowl with food and keep track of the liquid food level.
- In the event of an unintended interruption in the rotation of the Blender Bowl blades turn off the Kitchen Machine and unplug it from the mains – only after that it will be safe to remove ingredients blocking the rotation of the blades.
- Extract food or pour liquids out of the Blender Bowl only after the Rotating Blades
- have completely stopped.
- careful when handling the Blender Bowl, as the cutting edges of the Rotating Blades are sharp and can be dangerous. Be extremely careful during cleaning or when extracting processed foods!
- Regularly clean the kitchen machine body and the parts which were used during the operation.
- For child safety reasons do not leave polyethylene bags used as packaging unattended.
ATTENTION! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!
- The unit is not intended for usage by children.
- Do not leave children unattended to prevent using the unit as a toy.
- Do not allow children to touch the unit body, the power cord or the power plug during operation of the unit.
- Be especially careful if children or disabled persons are near the operating unit.
- During the unit operation and breaks between operation cycles, place the unit out of reach of children.
- The unit is not intended for usage by physically, sensory, psychically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
- Before using the kitchen machine, check the power cord integrity. If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.
- Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected, and after the unit was dropped, unplug it and apply to the service center.
- To avoid damages, transport the unit in the original package.
- Keep the unit in a dry cool place out of reach of children and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR LABORATORY PURPOSES.
BEFORE THE FIRST USE
After the unit transportation or storage at negative temperature, unpack it and wait for at least 3 hours before using it.
- Unpack the unit and remove all the packaging materials.
- Keep the original package.
- Read the safety measures and operating recommendations.
- Check the delivery set.
- Examine the unit for damages, in case of damage do not plug it into the mains.
- Make sure that specified specifications of power supply voltage of the unit correspond to the specifications of your mains. When the unit is used in the mains with 60 Hz frequency, it does not need any additional settings.
- Wash the attachments (12, 13, 14), the lid (8), the bowl (7) with warm water and a neutral detergent, rinse and dry.
- Wash the Blender Bowl (17), Blender Bowl Cover (16), and Measuring Cup (15).
- Also wash the meat grinder parts (20-27).
- Wipe the motor unit (2) and the base (5) with a soft, slightly damp cloth, then wipe dry.
USING THE ATTACHMENTS
Dough kneading attachment (14)
- Use the attachment (14) to knead yeast dough or short pastry, to stir minced meat, etc.
- Mix dry ingredients at a low speed, while kneading the dough, periodically increase or decrease the attachment (14) rotation speed by turning the operation mode switch knob (4).
Mixing attachment (13)
You can use the attachment (13) to knead pancake or biscuit dough or to make mashed potatoes. Adjust the attachment (13) rotation speed by turning the operation mode switch knob (4).
Beater (12)
Use the beater (12) for whipping cream, egg whites, puddings, cocktails, cream, mayonnaise, sauces and mixing liquid foods. Set the operation mode switch knob (4) to the maximum attachment (12) rotation speed.
ATTACHMENTS USAGE
Attachment | Usage | Description |
---|---|---|
Dough kneading attachment (14). | Ingredients mixing and yeast | |
dough kneading | Bread, rolls, pizza |
dough.
Ingredients mixing attachment (13).| | Ingredients
mixing| Mashed potatoes,
biscuit dough,
shortcrust pastry,
cream icing,
confection mix.
Whisk (12)| | Light fluffy mixes making.| Beaten eggs or egg whites, whipped
cream, icing, mayonnaise.
USING THE KITCHEN MACHINE
ATTENTION! Do not operate the appliance continuously for more than 10 minutes, after which make a pause for a minimum of 20 minutes.
-
Before installing the attachments, make sure that the power plug is not connected to an electrical outlet and that the operation mode switch knob (4) is set to the «0» position.
-
This kitchen machine has been designed with covers (1, 11) for the installation places of additional attachments (included), the covers removed activate the system preventing the kitchen machine switchingon with no attachment installed. Always check the correct covers installation before using this kitchen machine (1, 11), otherwise it will not turn on.
-
Hold the motor unit (2) with your hand and press the lock lever (3), the motor unit (2) will be fixed in the upper position (pic. 1).
-
Set the bowl lid (8) in its installation place (10).
-
Turn the lid (8) to fix it.
-
Set the bowl (7) in its installation place (6) and turn it clockwise (pic. 2).
-
Install one of the attachments (12, 13 or 14) on the shaft (9), to do this, slightly press the attachment upwards and turn it counterclockwise until tight (fig. 3, 4). Make sure that the attachment is properly fixed.
-
Place the required ingredients in the bowl (7).
-
Press the lock lever (3) and hold it, press the upper part of the motor unit (2), lower it to the operation position and release the lever (3). Make sure that the motor unit (2) is securely fixed in the operation position (pic. 5).
-
Connect the power plug to an electrical outlet.
Note: Imake sure that the covers for the installation places of additional attachments (1, 11) are correctly set and fixed. -
To activate the kitchen machine turn the operation mode switch knob (4) clockwise and set the required attachment rotation speed «1—10».
Note: when making yeast dough, use lower Dough Hook (14) rotation speeds. -
Always start at a lower speed, then gradually increase the attachment rotation speed
-
You can add the required ingredients during the operation through the opening in the lid (8).
-
To switch the kitchen machine on for a short time, turn the operation mode switch (4) to the “P” position.
For a short Kitchen Machine operation session, set the Operation Mode Switch (4) to «Р» and hold it down. -
Upon completion set the operation mode switch knob (4) to the «0» position and disconnect the power plug from the electrical outlet.
-
Hold the motor unit (2) with your hand and press the lock lever (3), the motor unit (1) will be fixed in the upper position (pic. 1).
-
Remove the installed attachment by turning it clockwise (fig. 3).
-
Turn the lid (8) and remove it.
-
Remove the bowl (7) by turning it counterclockwise.
-
Remove food from the bowl (7).
-
Wash the used attachment and the bowl (7) with warm water and a neutral detergent, rinse and dry.
CLEANING AND MAINTENANCE
- After using the kitchen machine, turn it off by turning the operation mode switch knob (4) to the «0» position and disconnect the power plug from the electrical outlet.
- Wash the used attachment (12, 13, 14), the lid (8) and the bowl (7) with warm water and a neutral detergent, rinse and dry.
- To pre-wash the Blender Bowl (17), after using the Blender Attachment, pour some water into the Bowl (17) and turn the Kitchen Machine on, using the pulse mode, for which purpose set the Operation Mode Switch to «Р» and hold it down. Then, remove the Bowl (17), wash it thoroughly, making sure to be careful, as the cutting edges of the Rotating Blades (19) are sharp and can be dangerous.
- After using the Meat Grinder Attachment, disassemble it, wash the parts (21, 22, 23, 24, 25, 26, 27), rinse, and let them dry.
- Wipe the motor unit (2) and the base (5) with a soft, slightly damp cloth, then wipe dry.
- Do not use metal brushes, abrasive cleaners and solvents to clean the kitchen machine.
- Do not immerse the kitchen machine, the power cord and the power plug in water or any other liquid.
- When cleaning the kitchen machine, avoid water and cleaning agents to get into the motor unit (2) and the joint between the motor unit (2) and the base (5).
- The Attachments (12, 13, 14), the Bowl (7), the Meat Grinder parts can be washed in a dishwasher.
STORAGE
- Before storing the kitchen machine, make sure that all attachments and the body are clean and dry.
- Keep the unit in a dry cool place out of reach of children and disabled persons.
DELIVERY SET
- Kitchen machine – 1 pc.
- Bowl – 1 pc.
- Bowl lid – 1 pc.
- Attachments – 3 pcs.
- Instruction manual – 1 pcs.
TECHNICAL SPECIFICATIONS
- Power supply: 220-240 V ~ 50-60 Hz
- Maximum power consumption: 1000 W
- Food Bowl capacity: 5.5 liters
RECYCLING
To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after expiration of the service life of the unit or the batteries (if included), do not discard them with usual household waste, take the unit and the batteries to specialized stations for further recycling.
The waste generated during the disposal of products is subject to mandatory collection and consequent disposal in the prescribed manner.
For further information about recycling of this product apply to a local municipal administration, a household waste disposal service or to the shop where you purchased this product.
The manufacturer reserves the right to change the design, structure and specifi-cations not affecting general operation principles of the unit, without prior notice.
The unit operating life is 3 years
The manufacturing date is specified in the serial number.
In case of any malfunctions, it is necessary to apply promptly to the authorized service center
Produced for «Ruste GmbH»,
Berggasse 18/18, 1090 Vienna, Austria
т.: +7 (495) 297-50-20,
e-mail: info@brayer.su
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>