hansgrohe 71251XXX Logis 110 Fine Washbasin Mixers Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
- hansgrohe 71251XXX Logis 110 Fine Washbasin Mixers
- Product Information
- Product Usage Instructions
- Safety Notes
- Installation Instructions
- Technical Data
- Adjustment
- Dimensions
- Flow diagram
- Spare parts
- Operation
- Test certificate
- Assembly
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 71251XXX Logis 110 Fine Washbasin Mixers
Product Information
The product is a Logis faucet model 110 Fine. It is available in different versions: 71251XXX / 71252XXX / 71253XXX, 71254XXX / 71255XXX, and 71257XXX / 71258XXX. It is designed for use inbathrooms for bathing, hygiene, and body cleaning purposes. The faucet has a maximum operating pressure of 1 MPa and a recommended operating pressure of 0.1 – 0.5 MPa. It can withstand a test pressure of 1.6 MPa. The product is suitable for thermal disinfection and can be adjusted for hot water temperature. It is important to note that the faucet is designed for use with drinking water only.
Product Usage Instructions
1. Safety Notes: – Wear gloves during installation to prevent crushing and cutting injuries. – The product should only be usedfor bathing, hygiene, and body cleaning purposes. – Ensure that the hot and cold water supplies have equal pressures.
2. Installation Instructions: – Remove the flow limiter located behind the aerator if needed. – Follow the provided assembly instructions on page 33.
3. Technical Data: – The faucet has a maximum operating pressure of 1 MPa. – The recommended operating pressure is 0.1 – 0.5 MPa. – The test pressure is 1.6 MPa. – The hot water temperature can be adjusted. – Do not use silicone containing acetic acid.
4. Cleaning: – Follow the cleaning instructions provided on page 40.
5. Operation: – Follow the operating instructions provided on page 38.
6. Spare Parts: – Refer to page 39 for information on available spare parts.
7. Assembly: – Follow the assembly instructions provided on page 33.
For more detailed information, refer to the user manual or instruction booklet that came with the product.
Models
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The product may only be used for bathing, hygienic and body cleaning purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart® (flow limiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
-
Operating pressure: max. 1 MPa
-
Recommended operating pressure: 0,1 – 0,5 MPa
-
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI) -
Hot water temperature: max. 60°C
-
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.
Dimensions
Flow diagram
Spare parts
XXX = Colors
000 = Chrome Plated
670 = Matt Black
700 = Matt White
Special accessories
(order as an extra)
- special tool #58085000
- Installation putty
Cleaning
Operation
Logis 100 Fine / Logis 240 Fine
Logis 100 Fine CoolStart
- Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.
Test certificate
Assembly
Hansgrohe · Auestraße 5 – 9 · D-77761 Schiltach · Telefon +49 (0) 78
36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>