NEPROCK FY-5001 Foot Massager with Heat User Manual

Table of Contents

NEPROCK FY-5001 Foot Massager with Heat User Manual

Thanks for purchasing Triducna Massager.
Please read this manual carefully before use.

Please don’t use spare and accessory parts that aren’t recommended by manufacturers.
Non-professional repairman is forbidden to dismantle massager to change parts.
If the power cord is damaged, it must be replaced by a professional in order to avoid danger.
Please don’t use or store it in damp or high-temperature places.
Please disconnect battery socket from outlet after use.
Each use time is less than 20 minutes or so.
If you feel unwell or any abnormality during use, stop using it immediately.
In case of excess temperature or bad smells in use, please stop using the product immediately and switch off electric power.
Please don’t move this product by dragging power line or take power line as a grip.
The product is not suitable for humans who are lack of physical, sense or spirit capacity or are short of experiences and knowledge (including children), unless they are supervised by humans who can be responsible for their safety or provide related product instructions.
Please don’t insert or drop in any objects in any openings.
Humans who are insensitive to heat should use heating function carefully.

In case of following conditions, please consult a doctor before use.
- Pregnant woman, children, the older.
- Humans with skin infectious diseases, skin redness, burns or scalds.
- Humans who use cardiac pacemaker or similar implantable medical devices.
- Humans with heart disease or malignant tumor.
- Humans who are receiving treatment or ill.
- Humans with osteoporosis.
- Humans with high blood pressure or abnormal blood pressure.
This products cannot have any medical purposes, only for person or non-professional humans use.

Before use, please confirm that product switch has been closed and power socket has been pulled out from socket.
Please use dry cloth to clean its surface.
Avoid using corrosive detergent like benzene and diluent in this product and its accessories.
When you don’t use it, please put it in dry and cool place.
Avoid to be radiated directly by sun or placed in damp place, otherwise, it is easy to fade or damage.

Product Diagram

Control Panel

Power Button:
Turns the power on and off. The default time of massage is 15 minutes with automatic turn off.
Mode Button:
Press the button to switch between 3 types automatic operating modes.
P1: Both sole roller massage and pressure massage are on with adjustable pressure strength, and the heating can be either turned on or off.
P2: The sole roller massage is off while the pressure massage is on with adjustable pressure strength, and the heating can be either turned on or off.
P3: The pressure massage is off while the sole roller massage is on, and the heating can be either turned on or off.
Strength button:
The default intensity is set at middle after turning it on. Press the button to switch between 3 types of pressure strength cycle adjustment of L2 (middle) – L3 (high) – L1 (low).
Time Button:
The default time is set at 15 minutes after turning it on. Press the button to switch between 3 types of timed cycle adjustment of 20min-10min-15min.
Heating Button:
For the initial operating status, the sole heating function is automatically turned on (the LED indicator of massage will turn red).Press the button to turn off the heating function (the LED indicator of massage will be off).

Problem	Cause	Solution
Unable to start the product

Stop suddenly during use| The massage time is too long| Turn off the power and reuse after 1 hour
Make a faint sound while using|

| A common sound and non-fault

Read User Manual Online (PDF format)