TENTACLE SYNC 002 Multipurpose Timecode Display User Guide
- June 7, 2024
- TENTACLE SYNC
Table of Contents
TENTACLE SYNC 002 Multipurpose Timecode Display
FAQ
Frequently Asked Questions
- Q: How do I update the firmware of the device?
- A: Connect the device to a computer using the USB-C port and follow the instructions provided in the firmware update section of the user manual.
- Q: How do I charge the device?
- A: Use a compatible USB-C cable to connect the device to a power source for charging.
- Q: How do I adjust the brightness settings?
- A: Press the BRIGHTNESS button on the device to adjust the brightness level. Press it twice for a Brightness Boost for 30 seconds.
Product Overview
Using Instructions
POWER ON
- Short press POWER: Timebar starts up waiting to be synchronized by app or external timecode
- Long press POWER: Timebar starts up generating timecode with Time of Day (RTC)
POWER OFF
- Long press POWER: Timebar turns off
BRIGHTNESS
- Press A & B at once: Enter Brightness Selection
- Press A or B: Select Brightness Level (1–31/Auto)
BRIGHTNESS BOOST
- Press A & B twice: Brightness Boost for 30 Seconds
MODE
Press POWER: Enter Mode Selection
- Press A or B: Browse Modes
- Press POWER: Select Mode
TIMECODE
- A: Show User Bits for 5 Seconds
- B: Hold Timecode for 5 Seconds
TIMER
- A: Select one of 3 Timer Presets
- B: Start/Stop
STOPWATCH
- A: Reset Stopwatch
- B: Start/Stop
MESSAGE
- A: Select one of 3 Message Presets
- B: Start/Stop
All these functions and other settings are also accessible through the Tentacle Setup App.
Read User Manual Online (PDF format)
Loading......