innoci-usa 81171 One Piece Single-Flush Toilet User Guide
- October 27, 2023
- innoci-usa
Table of Contents
innoci-usa 81171 One Piece Single-Flush Toilet
TOOLS AND MATERIALS YOU MAY NEED
PACKAGE CONTENTS
BEFORE INSTALLATION
Please make sure the following requirements are met.
- Minimum distance between finished wall and center of the floor drain should be 12”.
- Minimum distance between the center of the shut-off valve to the center of the drain should be 6-1/2” (FIG 1).
INSTALLATION
-
Install new floor bolts into floor flange and attach the L brackets. (FIG 2)
-
Attach flexible water supply line (not included) to the inlet of the fill valve and hand tighten ONLY. At this point, DO NOT connect to the water shut-off valve. (FIG 3)
-
Place the new Wax Ring around the waste flange of toilet bowl. (FIG 4)
-
Lower the toilet onto the closet bolts, so the bolts project through mounting holes in base of toilet. (FIG 5) Using a rocking motion, press the bowl down to position the toilet onto the flange.
-
Insert the plastic plug followed by mounting bolts. Tighten the bolts alternately until toilet is firmly seated on the floor.
CAUTION: DO NOT OVERTIGHTEN BOLTS, SEVERE DAMAGE MAY OCCUR. Put the decorative caps on after tightening the bolts. -
Connect the flexible water supply line (not included) to the shut-off valve. Tighten coupling nut securely. (FIG 7)
-
Turn on water supply valve and allow tank to fill until float valve rises to shutoff position. Check for leakage at fittings, tighten or correct as needed.
WARRANTY
1-Year Limited Warranty
Our products have been manufactured under the highest standards of quality and
workmanship. innoci usa warrants to the original purchaser that our products
are free from any defects in material and workmanship by normal use for 1 year
from the date of purchase. A replacement for any defective part will be
supplied FREE OF CHARGE for installation by you.
This warranty is valid to the original purchaser only and does not cover
product damage due to installation error, product abuse, product misuse, etc.
whether or not performed by professionals. innoci usa will not be responsible
for labor charges and/or damage incurred in installation, repair or
replacement nor for any incidental or consequential damages.
All warranty claims should be sent to customerservice@innoci-
usa.com or call 1.866.479.8076. Our
customer service representative will contact you promptly to help you go
through the process until you are completely satisfied with our products.
SHORTAGE OR DAMAGED PRODUCTS
All shipments are carefully inspected and counted before leaving our
distribution centers. Please inspect carefully on receipt of merchandise,
noting any discrepancy or damage on the carrier’s freight bill at that time,
and file a claim with the carrier within 10 days from receipt of order. Then
contact our office. Deductions from invoices for shortages or damage claims
will not be allowed.
RETURN NEW GOODS
All claims for returns or adjustments must have prior approval and return
authorization (RA) number. Only original, sealed product in salable condition
are eligible for return. Credit for authorized returns will be issued at the
net price paid for the product and subject to a 15% restocking/handling fee.
Merchandise is to be returned via prepaid freight. All unauthorized returns
will be refused or subject to a 25%
restocking/handling fee.
To request an “RA” number: Contact our Customer Service Representatives at
customerservice@innoci-usa.com. We
will send you a Return Authorization Number (RA) by return email. Please take
necessary precautions when returning merchandise to prevent additional damage.
Insurance is the responsibility of the shipper.
innoci usa, Inc.
14530 Best Ave,
Santa Fe Springs, CA 90670
www.innoci-usa.com
© innoci usa, Inc. All rights reserved.
Customer Service: (866) 479-8076 or customerservice@innoci-
usa.com
References
- USA Location information - USA.com
- Homepage, innoci-usa, illumirror, innovanity, innofaucet, electric mirror, lighted mirror