HiFuture Yacht TWS Earbuds User Manual

HiFuture Yacht TWS Earbuds

Product Information

• Specifications:
  • Dimensions: 80*95mm
  • Manufacturer: HiFuture
  • Model: Yacht TWS Earbuds
  • Charging Interface: TYPE C
• Package List:
  • Yacht TWS Earbuds
  • Charging Case
  • Silicone Ear-tips
  • Type-C Charging Cable
  • User Manual
• Indicators’ Descriptions:
  • Earbuds:
  • Power ON – LED flashes orange for 1 second
  • Power OFF – LED flashes white for 1 second
  • Pairing – LED flashes orange and white alternatively
  • Connected – LED off
  • Fully Charged – LED off
  • Reset Indicators:
  • Earbuds orange LED lights flash three times.
  • Charging Status:
  • Battery 100% – 75% – 4 Indicator lights
  • Battery 75% – 50% – 3 Indicator lights
  • Battery 50% – 25% – 2 Indicator lights
  • Battery 25% – 0% – 1 Indicator light
• Device Overview:
  • Microphone
  • Tap area
  • Earbuds indicator light
  • Microphone
  • Earbuds charging interface
  • TYPE C charging port
  • Earbuds case indicator light

Product Usage Instructions

• Charging:
  • Please fully charge the Yacht after unboxing.
  • Use the provided Type-C cable to charge the charging case.
• Connect the Earbuds:
  • Power on the earbuds and turn on the Bluetooth on your phone.
  • Tap “HiFuture Yacht” from the smartphone’s Bluetooth menu.
  • You will hear a voice prompt saying “You are Connected to HiFuture” after successfully connecting with your smartphone, and the indicator light will turn off automatically.
• Reset the Earbuds:
  • If your earbuds stop syncing with each other, please follow the steps below to reset them:
  • Make sure the Yacht is disconnected from your phone or any other Bluetooth devices.
  • Put both earbuds into the charging case for 5 seconds and then take them out.
  • Quickly tap either the left (L) or right (R) earbud 5 times. You will hear a prompt sound saying “Reset Succeed”, which means the Yacht has been reset successfully.
  • Put the earbuds back into the charging case, and they are ready to use.
• Important Notes:
  • Before using the Yacht wireless earbuds, please make sure to charge both the charging case and the earbuds.
  • If the earbuds do not pair together, please reset them following the instructions above.
  • If the earbuds do not charge, please clean the charging slot in the charging case and the contact point surface on the earbuds.
  • If the issue persists, please contact your local authorized HiFuture distributor/customer service.

FAQS

• Q: How do I charge the Yacht TWS Earbuds?
  • A: To charge the Yacht TWS Earbuds, use the provided Type-C charging cable and connect it to the charging case.
• Q: How do I know if the earbuds are fully charged?
  • A: When you open the charging case, you will see the charging status indicator LED lights in the middle of the two earbuds. The LED lights will shine when you charge the charging case or put the earbuds in. The number of lights indicates the battery level.
• Q: How do I reset the earbuds?
  • A: To reset the earbuds, make sure they are disconnected from any Bluetooth devices. Put both earbuds into the charging case for 5 seconds and then take them out. Quickly tap either the left (L) or right (R) earbud 5 times. You will hear a prompt sound saying “Reset Succeed” to indicate that the reset was successful.
• Q: What should I do if my earbuds stop syncing with each other?
  • A: If your earbuds stop syncing with each other, follow the reset instructions mentioned above. After resetting, put the earbuds back into the charging case, and they should be ready to use.

PACKAGE LIST

Please refrain from using any damaged components. Contact your local authorised HiFuture distributor/customer service.

Device Overview

1. Microphone
2. Tap area
3. Earbuds indicator light
4. Microphone
5. Earbuds charging interface
6. TYPE C charging port
7. Earbuds case indicator light

IMPORTANT NOTES

1. Before using Yacht wireless earbuds, please charge both of charging case and earbuds.
2. If both earbuds do not pair together, please reset the earbuds, see page 7.
3. If the earbuds do not charge, please clean the charging slot in the charging case and the contact point surface on the earbuds.

POWER ON/OFF

POWER ON

• Automatically
  • Ensure earbuds are inside the charging case, then take out both earbuds, The earbuds will flash an orange LED light for 1 second. It means earbuds are Power On.
• Manually
  • Long press Left and Right earbuds till to orange indicator LED lights up.

POWER OFF

• Automatically
  • Both earbuds will be AUTO OFF after putting them into the charging case for 5 seconds or disconnecting from the audio source device for 5 minutes.
• Manually
  • Long press Left or Right earbuds for 4 seconds till to white LED lights up for 1 second to Power OFF.

Note: When the charging case is at low battery or out of power, the earbuds will not automatically power on/off, please turn them on/off manually.

WEARING

1. Put the earbuds into your ears.
2. Rotate the earplugs to adjust the comfortable Angle.

CHARGING

Please fully charge the Yacht after unboxing. Use a Type-C cable to charge the charging case.

INDICATORS’ DESCRIPTIONS

Earbuds

Reset Indicators

• Earbuds orange LED lights flash three times.

Charging Status

When you open the charging case you will see charging status indicator LED lights in the middle of two earbuds. It will shine when you charge the charging case or put the earbuds in.

Battery 100% – 75%| 4Lights

Battery 75% – 50%

|

3Lights

Battery 50% – 25%| 2Lights
Battery 25% – 0%| 1Light

TAP CONTROL

CONNECT THE EARBUDS

1. Power on the earbuds and turn on the Bluetooth in your phone.
2. Tap “HiFuture Yacht” from the smartphone’s Bluetooth menu. There’s a voice prompt “You are Connected to HiFuture” after successfully connecting with your smartphone, and the indicator will be off automatically.

HOW TO RESET THE EARBUDS

If your earbuds stop syncing with each other, please follow the below steps to reset the earbuds：

1. Make sure the Yacht is disconnected with a phone or other Bluetooth devices.
2. Put both earbuds into the charging case for 5 seconds and then take them out, QUICKLY TAP L or R earbuds 5 times, there will be a prompt sound “Reset Succeed”, which means the Yacht has been reset successfully.
3. Put them back into charge case, and the Yacht is ready to use.

CONTACT

• Hereby, SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED declares that the radio equipment type HiFuture earbuds. mentioned in this manual complies with Directive 2014/53/EU.
• Manufacturer: SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED
• Address: B-206, Block B, Tsinghua Unis Inforport, Hi-Tech Park(North), Nanshan
• District, Shenzhen, China.
• EC REP
  • Liftmaster Consulting GmbH
  • Bettinastr. 30
  • 60325 Frankfurt am Main, Germany
  • contact@evatmaster.com.
  • OST_EU_20220713000004
• UK AR
  • HUA TENG LIMITED
  • 3 Glass Street, Hanley,
  • Stoke On Trent, ST1 2ET
  • United Kingdom
  • Join Us: @hifuturegroup/
  • For more information, please visit:
  • www.hifuturegroup.com.
  • For any assistance, email us:
  • info@hifuturegroup.com.
  • Designed in the USA, Assembled in China
  • Made by ShenZhen Future Access Technology Co., Limited
• Copyright HiFuture.
• All rights reserved.
• HiFuture, the HiFuture logo and other HiFuture marks are all owned and registered by SHENZHEN FUTURE ACCESS TECHNOLOGY CO., LIMITED.
• All other trademarks are the property of their respective owners.
• The information contained here is subject to change without prior notice.

References

• Home | HiFuture Group

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>