ACEFAST E3 Desktop Three-In-One Wireless Charging Stand User Guide
- June 6, 2024
- ACEFAST
Table of Contents
E3 Desktop three-in-one wireless charging stand
Quick Start Guide
Product Diagram
Package Contents
Wireless Charger X1
Data Cable X1
User Manual X1
This three-in-one wireless charger is a compact charging stand that can
wirelessly charge three devices with only one wireless charger to charge your
mobile phone, watch, earphones or other devices that support wireless
charging.
As long as it is placed on the corresponding charging zone, it can be
automatically charged wirelessly, which can make your desktop cleaner and more
convenient to charge. This product fixes the mobile phone through magnetic
attraction and has safety protection technology during the charging process,
making the charging safer.
Lighting Mode
| Pattern | Indicator Status |
|---|---|
| Power on | Blue light |
| Standby | The blue light is always on |
| Earbuds area charging | The first light changes from blue to green |
| Cell phone area charging | The second light changes from blue to green |
| Watch area charging | The third light changes from blue to green |
| Protection function | Blue light flashing |
Product Parameters
Model No: W68
Size: 157×118.5x85mm
Texture Of Material: ABS+PC
Input: DC5V/3A 9V/3A
Output (Mobile Phone): 5W/7.5W/10W/15W(Max)
Output (TWS): 5W(Max)
Output (Watch): 2.5W(Max)
Transmission Distance: ≤6mm
Conversion Rate: Slow charge ≥ 70% fast charging ≥ 75%
Work Efficiency: 110.5-205KHz
Note:
Applicable Equipment
Please check whether the phone supports magnetic suction wireless charging,
otherwise, it may cause the phone to slide down. This product supports fast
wireless charging function, The short distance radio energy transmission is
realized by magnetic induction.
Adapter Selection
When using a 5V/2A output adapter, the wireless charger supports 5W load. When
using the adapter conforming to QC3.0 standard, the wireless charger supports
15W load; In order to ensure the normal use of the charger, it is recommended
to use PD fast charging or adapter conforming to QC3.0 standard.
Other matters
Please do not put metal objects or magnetic cards on the charging board, which
may cause the charger to heat up, Remove the foreign object when the foreign
object alarms Slight fever is a normal phenomenon. The mobile phone battery
will be heated during charging, Do not put the charger close to the fire source
or corrosive environment.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the\ user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co‐located or operating in conjunction with any
other antenna or transmitter.
This equipment should be installed and operated with a minimum distance 20cm
between the radiator& your body.
Product Care
Keep away from liquids and extreme heat
Warranty & Customer Support
For questions, support, or warranty claims, contact us at the mail below that
corresponds with your region. Please include your Amazon order number and
product model number.
Amazon US orders: support1@acefast.com
Amazon EU orders: support2@acefast.com
Amazon UK orders: support3@acefast.com
Amazon CA orders: support4@acefast.com
Amazon JP orders: support5@acefast.com
Other region orders: support6@acefast.com
*Please note, ACEFAST can provide after-sales service for products purchased from any official ACEFAST store. If you have purchased from a local seller, you can also contact them directly for service or warranty issues.
Shenzhen Houshuxia Technology Co., LTD
www.acefast.com |
support@acefast.com
Rm203, 2nd Floor, Building C, Youth Pioneer Park,
Jianshe East Road, Tsinghua Community,
Longhua Street, Longhua District, Shenzhen, P. R. China
Shenzhen, 518000, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>