10L0L 1012454 Club Car DS Steering Joint Installation Guide
- June 6, 2024
- 10L0L
Table of Contents
Club Car DS Steering Joint
Installation Instruction
We are striving to build a reliable brand of golf carts parts and accessories. Hope this manual can assist you to easier install. For more technical support, please reach us via
Website: www.10l0l.com
Email: [email protected]
Facebook : zhong zaiyang
Youtube: 10L0L
（See figure 1 ）
Assembly diagram
Installation Tools Qty
7/16-inch (11mm) Spanner……………….2
1/2-inch (13mm) Spanner…………………1
9/16-inch (14mm) Spanner……………….2
3/4-inch (19mm) Socket……………………1
Slotted Screwdriver………………………….1
Jack………………………………………………1
Cross Screwdriver……………………………1
Installation Tools
Installation Steps
-
Park the vehicle on level ground.
-
Turn the key to “OFF” position and remove it from the switch.
-
Make sure the parking brake is set.
-
Remove the push-type blind rivet of the front body with the slotted screwdriver, and remove the front body.
（See figure 2 ） -
Remove the screws of the steering joint with the 1/2-inch (13mm) spanner.
**（See figure 3 ）
**
-
Remove 3 screws of the steering gearbox assembly with the 9/16-inch (14mm) spanner.
（See figure 4 ）
-
Remove the steering joint.
（See figure 5 ）
-
Install a new steering joint.
（ See figure 6 ）
-
Install the screws on both ends of the steering joint.
（See figure 7 ）
-
Install 3 screws of the steering gearbox assembly, and tighten them with the 9/16-inch (14mm) spanner.
（See figure 8 ）
-
Tighten the screws on both ends of the steering joint with the 1/2-inch (13mm) spanner.
（See figure 9 ）
Install the front body and the push-type blind rivet of the front body.
（See figure 10 ）
This all completes your installation.
International Smart Production, Global Direct Supply