10L0L Y206-B 3 Version Golf Cart LED Headlight and Tail Light Instruction Manual
- June 3, 2024
- 10L0L
Table of Contents
10L0L Y206-B 3 Version Golf Cart LED Headlight and Tail Light
We are striving to build a reliable brand of golf cart parts and accessories.
Hope this manual can assist you in easier installation.
For more technical support, please reach us via
Website: www.10l0l.com
Email: [email protected]
Facebook : zhong zaiyang
Youtube: 10L0L
Installation Tools
Installation Steps
- As the picture shows, Make sure the footboard is iron and there are 2 reserved holes (plastic board is not suitable for drilling) See figure 1
- Align the grab bar to two reserved holes below. See figure 2
- Mark the drilling position with a marker after alignment. See figure 3
- As shown,2 positions for drilling. See figure 4
- Drilling must be be 90° vertically. See figure 5
- Take out the prepared screws and washers. See figure 6
- Tighten the screws with two NO. 13 wrenches. See figure 7
- Do the same to top board. See figure 8
- Installation finish. See figure 9
Documents / Resources
|
10L0L Y206-B 3 Version Golf Cart LED Headlight and Tail
Light
[pdf] Instruction Manual
Y206-B, 3 Version Golf Cart LED Headlight and Tail Light, LED Headlight and
Tail Light, 3 Version Golf Cart Headlight and Tail Light, Headlight and Tail
Light, Tail Light, Light
---|---
References
Read User Manual Online (PDF format)
Loading......