WARRIOR 90976 Grinder Brush Kit Instruction Manual
- June 6, 2024
- WARRIOR
Table of Contents
Grinder Brush Kit
(7 Pieces)
Safety Warnings and Instructions
MAX. RPM = 12,500
5 /8 ″x 11 TPI Arbor
These wheels and brushes, made from crimped carbon steel wire, are to be used
with an appropriate angle grinder. They can be used for roughening, deburring,
cleaning prior to welding, rust and paint removal, and weld spatter and
corrosion removal.
The set includes the following:
3″x 24 4” Knotted Wire Cup Brush
3″x 24 4” Crimped Wire Cup Brush
4″x 3/4” Cable Twist Wire Wheel
4″x 3/4” Stringer Bead Wire Wheel
5 / 8” to M10-1.25 Adapter
5 / 8” to M10-1.50 Adapter
4×16 Row Wire Brush with Wood Handle
**IMPORTANT SAFETY WARNINGS
**
- Always wear ANSI-approved safety goggles, a full face shield, and a respirator when working with these tools.
- BEFORE use, read, and adhere to all warnings, safety precautions, and operating instructions in the owner’s manual for the appropriate angle grinder these accessories are to be used with.
- The brush and wheel bristles are very sharp and can easily cause skin cuts and puncture wounds; be extremely careful when unpacking these products and when handling and using the wheels and brushes. Always wear gloves when handling and using these wire brushes.
- Exposure to aluminum oxide (dust generated from material removing processes) can result in eye, skin, and breathing irritation. Always use a NIOSH (National Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure. Proper ventilation in the work area is required.
- Never exceed the 12,500 RPM maximum.
Record Product’s Serial Number Here:
Note: If the product has no serial number, record the month and year of
purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and
are not available individually as replacement parts. Specify UPC 792363909761
when ordering parts.
26541 Agoura Road, Calabasas, CA 91302
Copyright© 2021 by Harbor Freight Tools®.
All rights reserved.
No portion of this sheet may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call
1-888-866-5797.
Thank you for choosing a Harbor Freight Tools product.
Save the receipt and these instructions.
It is important that you read this entire instruction sheet to become familiar
with these products before you begin using them.
SAVE THESE WARNINGS.
Documents / Resources
|
WARRIOR 90976 Grinder Brush
Kit
[pdf] Instruction Manual
90976, Grinder Brush Kit
---|---